Question about 1985 Jeep Grand Wagoneer

Open Question

Son mixed up spark plug wires on distributor cap on 1986 grand wagoneer,whats the order they go back on to the cap?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6982 Answers

SOURCE: spark plug order

Order is 153624 #1 plug is one closest to radiator. #1 tower on cap is one just past the cap hold-down screw (clockwise) furthest away from block. order runs clockwise around cap.(next time, remove them one at a time!!)

Posted on Jan 26, 2009

Ad
66 chrgr
  • 1011 Answers

SOURCE: Distributor cap wiring diagram

1-5-3-6-2-4 firing order. #1 is located for you on the cap, go clockwise.with the wires.cylinders 1through 6 are front to back

Posted on Apr 22, 2009

  • 6 Answers

SOURCE: what is the firing order of a jeep comanche 1986 v-6 engine?

if its a 2.8 the firing order is 1-2-3-4-5-6 and the distributor rotates:clockwise if you lose this look ontop of your intake manifold and it has it stamped on it by the number to intake.

Posted on Jun 06, 2009

ZJLimited
  • 17970 Answers

SOURCE: spark plug wire position on distributor cap

1-5-3-6-2-4
ALL Jeep 4.0 motors use this firing order. Any year, any model, high output or not.

Also, the spark plug wire placement on the cap, in a clockwise direction from the post nearest the engine block is: 6-2-4-1-5-3.(to the left side of the number 6 post, there should be a hold downscrew or strap for fastening the distributor cap to the distributor.
For a picture diagram, please go to this website:
- http://www.fixya.com/cars/t2859850-need_spark_plug_wiring_1993_jeep_4l
- http://www.jeepz.com/forum/engine/16923-six-cylinder-4-0-liter-jeep-engine-specs.html

Good luck (rated this help)

Posted on Sep 07, 2009

ZJLimited
  • 17970 Answers

SOURCE: need wiring digram from spark plugs to distributor cap

Review the Jeep ZJ Repair Manual in the Firing Order (page 10 and 11) for 4.0L 6-cyl and 5.2L 8-cyl.

I really hope hepled with this (remember rated this help) Good luck.

Posted on Nov 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Correct firing order diagram


18436572 going clockwise starting with the post facing the number one cylinder if the distributor is placed correctly.18687102-hlfblu1xwv0b4o5lgdzngsbd-5-0.jpg

Jun 29, 2013 | 1986 Pontiac Firebird

1 Answer

I mixed up my spark plug wires i changed the distributor cap and rotor and spark plug wires but i mixed them up can any one help me


You can google the engine size and "firing order" to get a drawing or photo of the firing order online.
Example - - 1990 GMC 350 firing order diagram

Dec 19, 2012 | GMC Sierra Cars & Trucks

1 Answer

1986 buick 3.0 engine stalls, no spark then after 10 min. there is spark


For spark plug problem, click the help links provided below: ---
Car has no spark?

http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

------------
How to Replace Spark Plugs?

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html

-------------
Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?

http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

----------
How to gap spark plug ? http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

-----------
Spark plug Replacing for?

http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

-----------
How to identify number one spark plug on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

---------
How does the spark plug wire go on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

---------
Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html

-----------

This will help.
Thanks.

Mar 03, 2012 | 1986 Buick LeSabre

1 Answer

How do I replace the sparkplugs


Buy the appropriate spark plugs from your auto supply store. They will need to know your engine size (# of Cylinders Etc.) as well as the info you have supplied here (yr make model) Gap the new plugs to manufacturer specs. Follow the plugs wires from the distributor to the plugs. Remove plug wire and unscrew one plug at a time so you do not mix up the firing order and replace with the new plug. Put wire back on. You may want to replace the distributor cap and rotor at this time as well. Be sure, again not to mix up the order of the wires. Mark them in some way so you know how to put them back on the new cap in the same order they came off of the old cap. Medical tape and a numbering system works well. Also use a felt pen to mark the old and new caps to correspond to the numbers on the tape. Does this help? Let me know. Thanks.

Dec 26, 2010 | 1999 Chevrolet Cavalier

1 Answer

94 royal begis to cut out, chugs at about 55


Replace the spark plugs and wires along with a distributor cap and rotor. Be careful to leave the old wires and plug wires connected to dist.cap, just remove dist. cap from the distributor and lay aside with plug wires on it then install rotor then new cap and proceed to replace each wire for cap and spark plug one at a time so you don't mix up the spark plug wire firing order. Cap laying to the side is used for reference purpose.

Feb 26, 2010 | 1994 Oldsmobile 88

1 Answer

Need wiring digram from spark plugs to distributor cap


Review the Jeep ZJ Repair Manual in the Firing Order (page 10 and 11) for 4.0L 6-cyl and 5.2L 8-cyl.

I really hope hepled with this (remember rated this help) Good luck.

Nov 18, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Firing order for a 1986 gmc s15


FIRING ORDERS

To avoid confusion, ALWAYS replace spark plug wires one at a time.

The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.

db45c9c.jpg

Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise

cf6af5d.jpg

Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

5c33822.jpg

Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

cae855e.jpg

Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise

9674e44.jpg

Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise

I hope help you with this (remember rated this help) Good luck.

Oct 05, 2009 | 1986 GMC C1500

1 Answer

Plug wires to distributor rotor


Hello Macstff ;

1985 jaguar xj6 4.2 L Series 3
Firing Order 1-5-3-6-2-4
# 1 Spark plug at the last cylinder next to the firewall .
# 6 Spark plug at the front of th Engine nearest the fan .

The Rotation of the Rotor within the distributor cap is " Counter Clockwise

The Vacuun Advance Diaghram ( metal ) is more in line with the # 3 Spark plug wire .

Looking from the top near the Passenger side fender . If we know that the Number 3 Plug is more inline with the vacuum advance then moving " clockwise the next plug would be the # 5 and after that would be the # 1 plug

This shold get you on your way providing that nothing else has been tampered with . I hope that this has been helpful to you .

May 05, 2009 | 1986 Jaguar XJ6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...