Question about 1994 Nissan Maxima

2 Answers

Door lock when i put the lock with my remot dont work so i have to push with my hand to lock the door.but somebody tell me that maybe is the relays please u can help me .

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

1997 Nissan Maxima, how do I  set the doors to lock automatically when the engine started?

Posted on Jan 03, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 38 Answers

Make sure the battery on your Keyless Entry remote is a working battery.

If thats not it, it could very well be the actual button on your Keyless Entry remote being faulty. But it could also be a relay in the car aswell. Depending on the cost of a Relay versus the cost of a Keyless Entry remote, I would try to replace either/or and try again, whichever is cheaper. The Relay may be cheaper, but your Key-FOB sounds like it could be the cause.

Posted on May 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power lock


check door locks fuses and relays.if all is good and you cant operate door lock buttons manually problem could be in the generic electronic module.if door locks dont work from the remote battery could be dead in remote transmitter.try to reset door locks control module first obtain all remote transmitter.sit inside vechicle with all doors closed.switch ignition from off to on 8 times in 10 seconds. doors should lock then unlock.when this procedure works then press any button on any of the remote transmitter doors should lock and unlock.if all fails let dealership fix..

Dec 27, 2012 | 1998 Ford Windstar

1 Answer

Map lights and power door locks stopped working -2001 Chvy Camaro


sounds like you fried a relay ,, and will have to see a tech. for this ,, someone you trust and is ASE cert. in Auto electrical specialist

Nov 20, 2009 | 2001 Chevrolet Camaro

1 Answer

Doors won't lock from the remote key or side pannel driver's seat. Sometimes they lock and other times they don't. Also, when I try to lock the door using the key it works at times.


Without knowing your vehicle type I would have to say this is most likely a relay issue. The good news is that they're not expensive and they're easy to replace. Look in your owner's manual and it will tell you where under the hood the door lock relay is located. They simply pull out to unplug and push back in to reinstall. Give this a try and see if it doesn't fix the problem for you. Hope this helps, good luck!

Sep 02, 2009 | 1999 Lexus Gs 300

1 Answer

1995 Volvo 850 Electric Door Looks do not Work


IT SOUNDS LIKE THE REMOTE BATTERY IS BAD AND IT MUST HAVE 3 VOLTS AND AFTER REPLACING IT CYCLE KEY 5 TIMES ON AND OFF THEN PUSH EITHER BUTTON AND IT SHOULD ACCEPT THE PROGRAMMING TRY THIS FIRST AND TELL ME IFIT DOES NOT WORK

Apr 01, 2009 | 1995 Volvo 850

1 Answer

Door lock dont work and remote lock does


Look under the Hood and Locate the Fuse Relay Box. Should be on the Drivers side torwards the Firewall. There is a Relay in it for the Door Locks. Replace this Relay and see if they will not work. Also check the Fuses in BOTH Boxes inside and under Hood with a Flashlight and Make for Sure that no Fuses are Blown. Please Rate My Response! Thanks!

Feb 06, 2009 | 2004 Pontiac Vibe

1 Answer

We have a 2007 Entourage and you cannot lock it with the car running. We installed a remote starter and it will not lock the doors when it is remotely started. Can this feature be disabled?


i think that this is to prevent you from locking your keys in the car with the engine running.
Some remote starters have a feature that when the car is running (and in park) you can hit the remote start button twice for one second each - then you can take the key out of the ignition and still have the car running.
At this point....if you would hit the 'lock' button on your door the doors would immediately unlock. However, if you get out of the car and close the door leaving it unlocked and then you hit the 'lock' on your original car remote the doors will lock and stay locked. So now the car is running the doors are locked and you have the keys in your hands. Then you can run into the store or house real quick with your car locked.
Once you come back, you hit 'unlock' on the original car remote. the doors will unlock - you can get it - and then before hitting the brake put the key in the ignition and turn it (dont crank it) as if you had when originally using the remote starter.
Maybe this will work for you.....

Oct 14, 2008 | 2007 Hyundai Entourage Limited Minivan

2 Answers

Remote door locks


Hi,
Had the exact problem on my 02- Stick you hand under and pull out one of the relays where the clicking is.
Really tight under but I did it more by feel. I also went to a auto recycle place and picked up a relay from another sonata for 1 dollar, better than 30 dollars. Works like new. Take in the old one and match pins and numbers. There are two relays the same one for opening and one for closing . It is small and is hard to pull out. Good luck.

Oct 13, 2008 | Hyundai Motor 2002 Sonata

4 Answers

Door locks don't work


Disassemble the paneling on left side ,under the steering wheel. Remove all screws and pull out the panel until you can you can reach behind it to remove the two Black Relays, on the side closest to Steering wheel. Remove the Relay covers, Clean the contacts with a 1/8 fine strip of 600 wet/dry sand paper. Only place the paper between the contacts, and pull out while holding slight pressure on the relay Armature. Turn over the sandpaper and repeat once again. Very gently press the TOP resting contact pad closer to the armature, to lessen the gap between the contact points, so the armature doesn't have to travel as far to reach the closed contact position. Repeat the above with the other2nd Relay. Replace the covers, reinstall the relays And test the Door locks prior to buttoning up the paneling. Note, a pair of long needle nosed pliers will help in removing the relays. Just Grip the relay and rock in Forward and Backward as you apply upward pressure.

Oct 08, 2008 | 2001 Hyundai Sonata

1 Answer

Remote lock for back doors and rear tail gate door


Actually I found a solution. I remove the lock relay form the fuse panel and placed it back in place. I did not replace it. After doing this they worked. I probably need to replace the relay at some point, but for now that solved the problem. It was hard for me to believe that there is a separate relay for the lock and unlock circuit.

Sep 28, 2008 | 2005 Chevrolet Suburban

1 Answer

Our 1999 camry remote central locking remote died. Purchased a new one from toyota dealer has had done 3 years earlier. This time the dealer wanted a $35 fee to synchronise the remote so it will operate....


sit on driver seat close all doors
six times open close driver side door fastly and close the door
after that original key in your hand put in ignition switch and six times switch battery on and off during this remote keep in second hand and press lock unlock button and it will work normal

Jul 15, 2008 | Toyota Camry Cars & Trucks

Not finding what you are looking for?
1994 Nissan Maxima Logo

964 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...