Question about 1994 Ford Taurus

2 Answers

Where is the Engine Control Computer located on a 1994 Taurus with a 3.0? and are there any memory cards that have to be taken from the old one and placed in the rebuilt one that i purchased?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Your ECC has no memory cards that have to be transfer to the other ECC, the ECC is a seal unit, just install, no reprogramming needs to be done, ECC is under hood, passenger side, rear engine area, above passenger side blower motor, mounted on fire wall.

Posted on Sep 15, 2010

Testimonial: "Found it right where you said. Put new one in and had it back together in no time! Thanks !"

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 197 Answers

On the 1994 Taurus I have here the ECM is behind the glove box, but you have the bolt that holds it in is under the hood where your ECM is located.

Posted on Feb 13, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford taurus X SEL VSS location


the vss is located at the output shaft of the trans. it produces a signal measured in mV. often, on taurus platform vehicles, it is necessary to remove the exhaust from the engine and lower it. then a simple mV reading can be taken as per the pinpoint test. some signals can be found making higher frequency noise so the system continues to function but in limited strategy. the resulting runability problems should indicate to the owner that it needs to be taken in for repairs. continuing to operate in limited strategy often leads to fouled spark plugs and an eventual no start. since all this is often preceeded by a "service engine soon" light, or other amber MIL lamp in the instrument cluster, the car is indicating you must get the codes read. the testers technicians use can also deliver live datastream info and picture during operation. they use this data to find the sensors or actuators which are out of range, out of spec or causing a hard fault. if you decide to replace it, give notice to the plugs as maintenance. clear the memory and complete a full drive cycle before retest for a clear future of operation

Apr 24, 2014 | 2008 Ford Taurus X

3 Answers

Where is the crank sensor on a 1994 ford taurus gl


What engine? 3.0 DOHC 3.0 OHV 3.8 liter

Apr 10, 2013 | 1994 Ford Taurus

1 Answer

The motor sputters when the ac or heater is on


Idle Air Control Valve Idle Air Control Valve Operation:
00207_idle_air_control_valve.jpgA computer-controlled air bypass valve located in the throttle body. It helps control idle speeds by allowing air to bypass the throttle plates as to increase the idle spedle Speed Actuator Idle Speed Actuator Operation:
00210_idle_speed_actuator.jpgIt regulates the position of the throttle valve plate(s) to compensate for additional loads on the engine, like the air conditioner. It measures engine RPM readings, compares them to the reference RPM in the engine-control computer memory and adjusts the idle air by-pass.ed.

May 19, 2012 | 2002 Ford Taurus

1 Answer

Need to replace thermastat in a 1994 ford taurus, where is it located at,


Follow the upper radiator hose from the radiator to the engine. the hose will lead you right to it. The upper hose is connected to the thermostat housing. The thermostat is located under the thermostat housing. Hope this helps :)

Dec 18, 2010 | 1994 Ford Taurus

1 Answer

Where is the ECM located on the '94 Olds 88 Royale?


For 1994 Oldsmobile 88 3.8L SFI OHV 6cyl the Engine Control Computer is located front seating area, passenger side, under dash, mounted above kick panel.

Hope helps (remember to rate this).

Nov 09, 2010 | 1994 Oldsmobile 88

1 Answer

Where is oil pump located on a ford taurus 1994?


that all depends, the 3.0 liter is inside the engine oil pan, the 3.8 liter is on the outside above the oil filter in the front of the engine on the drivers side

Jul 15, 2010 | 1994 Ford Taurus

2 Answers

1994 Ford Taurus GL 3.8L engine battery light flickering


Sounds like the regulator might be going bad in the alternator.

Apr 03, 2010 | 1994 Ford Taurus

1 Answer

3.2 liter yamaha engine manual IAC valve How do I replace the IAC valve on this engine? Steps? I just bought a new one and I need to get it replaced. FORD 1994 Taurus SHO 3.2 liter engine YAMAHA


may just need cleaning with carb cleaner.

here is 1996, oldest I have:

Section 03-14: Engine Controls, Electronic 1996 Taurus, Sable Workshop Manual
REMOVAL AND INSTALLATION Idle Air Control (IAC) Valve Removal
  1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  1. Disconnect the engine control sensor wiring (12A581) from the idle air control valve (IAC valve) (9F715) at the idle air control valve electrical connector.
  1. Remove the two idle air control valve retaining bolts.
  1. Remove the idle air control valve and idle air control valve gasket.
Installation
  1. NOTE: If scraping is necessary, be careful not to damage idle air control valve gasket surfaces, or drop material into intake manifold (9424) or throttle body (9E926) (depending upon application).

    Clean idle air control valve gasket mating surfaces.
  1. To install idle air control valve, reverse Removal procedure.
  1. Tighten the idle air control valve retaining bolts to 8-12 Nm (71-106 lb-in).
33b4417.gif

Jan 14, 2010 | 1994 Ford Taurus

2 Answers

Where is the thermastae located at ford taurus 1994


follow the lower radiator hose to the goose neck and remove the goose neck you will find the thermostat there

Jan 06, 2010 | 1994 Ford Taurus

1 Answer

1994 Ford Taurus, there is a whinning noise in engine compartment


Its not the computer its the EGR valve actulator de-energizing. Nothing to worry about unless your check engine light comes on.

Jul 02, 2009 | 1994 Ford Taurus

Not finding what you are looking for?
1994 Ford Taurus Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...