Question about 2005 Chrysler Pacifica
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If it sounds more like it's coming from rear of engine, that could be a possibility, and should be followed up,but if it's coming from front of vehicle area, I'd concentrate on your accessory drive belt . If it hasn't been changed in quite a while especially. That belt is routed around about 8 different pulleys,in,out,over,under, and it would lead me to believe it would be a good candidate for wear & noise that would increase as it wears more. I wouldn't try belt dressing as I'm not a lover of that stuff, only for emergencies. It may be as simple as spraying water on it to see if the noise changes or disappears, just keep your eyes back if engines running. They make what they call an audioscope, basically a set of headphones wired to an amplified probe, so it's easier to isolate the noise, perhaps a local garage has one, and can pinpoint it for you. Years back mechanics would use a long screwdriver or pipe up to their ear and poke around, but that's very dangerous, so I wouldn't recommend that. Your engine does have a timing belt too, and engines in the past have been known to produce that sound you describe from wear on it too. I'd go after that one as a last resort unless manual recommends it at certain interval.
Posted on Feb 02, 2009
it is called a clockspring.
the other thing to check is that the rear part of the steering wheel is clearing the column shroud properly.
call a few places in your area and how much it is to change the clockspring.
Posted on May 28, 2009
SOURCE: my chrysler pacifica has motor
dont think motor mounts its sounds like transmission mount 0r rearend bushings .one way to check it is put hand brakes down & hold brake pedal down give it a little gas (this is what they call power braking) to see if you hear it now. you should be able to tell where is coming from.
Posted on Dec 08, 2010
Tips for a great answer:
Dec 18, 2015 | 2007 Opel Corsa Utility
Jul 25, 2014 | 2004 Chrysler Pacifica
Dec 21, 2012 | 2005 Chrysler Pacifica
Oct 03, 2011 | 2006 Chrysler Pacifica
Mar 17, 2011 | 2006 Chrysler Pacifica
Dec 07, 2010 | Chrysler Pacifica Cars & Trucks
Sep 23, 2009 | 2004 Chrysler Pacifica
Aug 14, 2009 | 2002 Chrysler Town & Country
Jun 22, 2009 | 2004 Chrysler Pacifica
Jan 03, 2009 | 2005 Chrysler Pacifica
67 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: