All ignition lights come on but just clicks on the turn of key.

Please provide more information.

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but there is nothing..." or

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but there only a ticking/clicking sound..." or

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but the engine only turns over and doesn't catch."

when the problem occur keep ignition key on engine stop. with a test light find out if fuses have all current if not might be ignition switch defect

do you hear a click as you turn the key in the ignition switch?yes!
have your battery pass the 400A charge test !

not at all , check your battery first and if good ,try electrical switch.
unless you have green security light that stays on
and than the key will have to be re-programmed

do the ignition lights come on? does it go click,click,click when you turn the key?

THAT'S WHAT I THINK IT IS

Battery connections

I hope you will be able to see that print

to program a key fob- get in vehicle and close all doors. insert key into ignition, have all the key fobs you want to program for this vehicle in hand, programing erases all old fobs. turn the ignition switch to on(all dash lights light up, on click before starting the car). then hit the lock button on one of the fobs. turn the ignition to lock. turn the ignition back to run and press the lock button again from the same remote. repeat untill all the locks cycle. ones the locks cycle keep the ignition in run and press the lock button on each key fob(the ocks will cycle each time a button is pressed). then turn the ignition to lock after all fobs have been programed

check to make sure yu have 12v at the battery, once you do turn the ignition to start, if nothing, check the fuse and relays that control ignition, if all is good then the click sound is coming from the starter, have the solenoid replace.