Where is the camshaft position sensor on a 2003 Chrysler Town and Country? Is it easy to get to? The mechanic wants $300. I can get the part for $42. It must be really hard to get to.

SOURCE: error codes 442 and 456 on 2003 Chrysler Town and Country

Could be the gas cap.  Do you fill the tank with the engine running?
Otherwise, check the hoses near the Evap canister.  I have 2003 T&C and had the small leak and large leak codes.  I looked at the evap cansiter and the hose coming from the fuel tank vapor line had a huge crack in it, to the point it had fallen off the evap caniser.  I trimmed the end of the hose and reconnected and voila, no codes.
The evap canister is on the driver's side of the van, underneath, slightly behind the drivers seat.
BTW, to clear the codes without an OBDII reader, remove the negative cable for 5-10 minutes (15 to be safe).  The computer resets and clears the codes, except for one that it sets saying loss of power to the memory.

SOURCE: fuse for stereo/cd in chrysler town and country minivan

Its in the box next to the battery and i had the same problem.The fuse is on the first line top.

Thanks

Mike Butler

• 6674 Answers
• Posted on Mar 14, 2009

SOURCE: I need instructions for changing the belt on a 2003 town and coun

Use this link as a guide, scroll down to find your picture (click to enlarge it) and scroll down for your engine.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528021e63d

SOURCE: 2003 chrysler 300m o2 sensor and camshaft position sensor

SOUNDS LIKE YOU HAVE CAMSHAFT DAMAGE.

SOURCE: I have a 2003 Chrysler Town and Country. I just

if you had installed a non factory alternator it might be the problem, factory alternator comes with a clutch pulley system