Question about 1998 Ford Expedition

Open Question

1998 expedition none of the power door locks are working and the fuse is good

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: power winidows, wipers, dome lights not working on 1998 explorer

This could be a combination of electrical issues, although i feel that the timing is coincidence in this case. When the combination is elec. windows, wipers, and dome lights this is indicative of the GEM module located behind your radio. The GEM (generic electronic module) is an electronic body control module that regulates electrical flow through a number of accessories.

These factory module boards are notorious for acting quirky by failing to ground intermittently until failing completely. I would be cautious in replacing ignition switches, locks, etc. as the issue can be also compounded by corrosion of the main battery ground wire in the engine compartment and which can cause frying of your under dash wiring into the main wiring harness which can get expensive (i speak from experience having had the exact same syptoms). My issues were that these symptoms occurred only in full ON. When in key BACK ACC mode, they disappeared.

New price for one of these modules is around $280-$300 and easily replaced.

Good Luck

Posted on May 21, 2009

Ad
roman1021
  • 102 Answers

SOURCE: power door lock switch won't work

i would look at all of my plugs

Posted on Aug 14, 2009

joshnaz
  • 186 Answers

SOURCE: I need a diagram for a fuse panel for 1998 Ford expedition, the r

  • good luckgraphic.aspx?mod=reptiff&module_id=1&session_id=%7b8327879e-293a-4376-ad3e-8702565e9ffb%7d&image_guid=00101030&print_bw=0&

Posted on Feb 26, 2010

  • 532 Answers

SOURCE: How do I de-activate the automatic power door

here is the instructions,i had to type it out because the picture was too large.Its actually for my 2000 Ford,give it a try because it might work.

Deactivating/activating the autolock feature
Before following the procedure,make sure that the ignition is OFF and all vehicle doors are closed.You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated.If the procedure needs to be repeated,you must wait 30 seconds.
1.Turn the ignition key to ON.
2.Press the power door UNLOCK control three times.
3.Turn the ignition key form ON to OFF.
4.Press the power door UNLOCK control three times.
5.Turn the ignition back to ON,The horn will chirp.
6.Press the UNLOCK control,then press the lock control.The horn will chirp once if autolock was deactivated or twice(one short and one long chirp)if autolock was activated.
7.Turn the ignition to OFF.The horn will chirp once to confirm the procedure is complete...Page 89 of the owners manual
about the Town car,try it on there as well,it wouldnt hurt it,i just dont have the manual for it.

Posted on Feb 26, 2010

  • 12 Answers

SOURCE: Power windows stopped working

check the connections on the switch

Posted on Jun 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I replaced the radio in my 98 expedition and no sound from speakers


Your car stereo may have an auxiliary amplifier. The fuse for that may be blown and not turning on and no sound coming out.

Mar 28, 2015 | 1998 Ford Expedition

1 Answer

Whereis the power door lock rela for a 1998 Expedition. NOT the Eddie Bauer edition. The owners manual does not specify what the 5 relays are for on the fuse panel under the dash. My Expedition's jack


The relay your looking for is behind the right side of instrument panel , ford calls this a relay block , because there are three relays in it driver unlock relay , all lock and all unlock relay ! I cant be more specific , my diagram isn't very clear . You may have to take the glove box out to get at it.

Mar 22, 2014 | 1998 Ford Expedition

1 Answer

I have a 1998 Toyota 4runner. None of the power window buttons work and neither do the lock/unlock buttons on both driver and passenger doors... But the power mirrors still work. Any advice would be a


Hi
Good Starting place .You Should check all the fuses To see if there If they are in good condition and not blown
Next place,. I would look Would be the wiring from the A post into the door For broken or damaged wires.ps Don't forget there will be more than one live going the door

Feb 16, 2014 | 1998 Toyota 4Runner

1 Answer

Power locks dont work on any doors in my ford expedition


first check all the fuses to make sure none are blown.

Oct 01, 2009 | 1997 Ford Expedition

1 Answer

Door lock fuse blows and locks wont work


i have a similar problem. when i turn the ignition switch, the doors begin locking and unlocking and the truck wont start. its a 1997 ford eddie bayer expedition. the "THEFT light is coming on too. any sugestions?

Jun 22, 2009 | 1998 Ford Expedition

Not finding what you are looking for?
1998 Ford Expedition Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...