Question about 2007 Toyota Sienna

Open Question

My 2007 Toytota sienna has been making a ticking noise from the engine all night long. It won't start. There is a car on the dashboard with a key inside that is flashing. When I put the key in and turn it, the ticking stops and light goes off but the engine doesn't start.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Dashboard warning lights.

The warning light that looks like a pot or kettle with arrows is the "Low tire pressure warning light*" I found the answer on the Toyota web site by registering, logging in, entering my model and searching the owners manuals for warning lights.

Posted on May 01, 2009

c17hydro
  • 2984 Answers

SOURCE: How to take out the light assy on a 2004 Toytota

Yes....herer is the steps to replacing it:

Headlight Assembly Removal & Installation Standard Headlights To Remove:

  1. Disconnect the battery ground cable.
  2. Remove the left and right front inner fenders. Fog light & headlight assembly (exploded view) toyota-06-00-5662.gif

  3. Remove the 8 screws and separate the front splash shield from the front bumper fascia.
  4. Remove the 5 push-pins from the top of the fascia grille.
  5. Release the retainers on the left and right sides of the front bumper fascia and pull the fascia toward the front of the vehicle.
  6. Disconnect the headlight assembly connectors.
  7. Remove the mounting bolt, 3 screws and headlight assembly.
  8. Turn all bulb sockets counterclockwise to remove.
To Install:
  1. Turn all bulb sockets clockwise to install.
  2. Align the retainers with the slots and install the front fascia.
  3. Install the 5 push-pins on top of the fascia grille.
  4. Install the front splash shield on the front bumper fascia with the 8 screws.
  5. Install the left and right front inner fenders.
  6. Connect the battery ground cable.
  7. Vehicles with power windows perform the following steps:
    • Turn the ignition switch on.
    • Open the power window halfway.
    • Close the window and continue to hold the switch up for at least 1 second after the window is closed.
    • Ensure that the auto up/down circuit is operating properly.
    • If the auto up/down circuit does not operate, disconnect the battery ground cable for 10 seconds.
    • Connect the battery ground cable.
    • Turn the ignition switch on.
    • Open the power window halfway.
    • Ensure that the auto up/down circuit is operating properly.
    • If the auto up/down circuit does not operate, turn the ignition switch on.
    • Open the power window halfway.
    • Close the window and continue to hold the switch up for at least 12 second after the window is closed.
  8. Vehicles with sliding roof system perform the following steps:
    • Turn the ignition switch on.
    • Press and hold the TILT UP switch until the glass tilts to the full up position. The glass will automatically tilt slightly down after it reaches the up position.
    • Release the switch.
    • If the sliding roof does not operate properly, replace the sliding roof ECU.

Posted on May 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford fusion stuck in park, engine won't start


It sounds like you have a dead battery. have it tested.

May 30, 2012 | 2007 Ford Fusion V6

2 Answers

2007 Toyota Sienna: Dashboard warning light - What does it mean?


That light means that you are setting the tire pressure guage. there is nothing wrong with the van.

Aug 06, 2009 | 2007 Toyota Sienna

1 Answer

When you turn the key on, there is a ticking sound in the dash.


sounds like one of the relays is defective. turn on the key and feel the tops of the relays in the fuse panel.... the one that is ticking needs to be replaced.

May 23, 2009 | 2006 Toyota Sienna

1 Answer

2008 Sienna engine noise on cold start-ups


IS LIFTER PROBL. WARRANTY ON THE CAR IS GOOD. CALL DELER OFFICE . YUOR CAR ISNOT A DIESEL.

Apr 17, 2009 | 2008 Toyota Sienna

1 Answer

Need tech support


check the battery when you turn the key does it tick a bunch of times if so you need a battery

Mar 23, 2009 | 2007 Toyota Sienna

3 Answers

Clicking noise when starting 99 Toyota Tacoma lights work, dashboard lit Any thoughts?


solenoids are worn out, it will probably eventually start after 4 or 5 clicks but its annoying as hell

Jul 26, 2008 | 1999 Toyota Tacoma PreRunner

3 Answers

Ticking noise


It is part of the waste gate just above the gas tank. It periodically checks for leaks and pressurizes and releases. Gives a ticking noise when it does this. Not a problem and GM is aware of this and said its normal on our cars.

Jun 02, 2008 | 2007 Chevrolet Cobalt Coupe

Not finding what you are looking for?
2007 Toyota Sienna Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...