Question about Hyundai Sonata

2 Answers

Need the torque specifications for a 2002 Hyundai Sonata LX

Posted by on

  • edrgibbs Sep 16, 2010

    I need to torque the cylinder heads to the block, need specifications. 2002 Hyundai Sonato Lx 2.7.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 516 Answers

Here you can see all the features of the car including the TORQUE.
http://consumerguideauto.howstuffworks.com/2002-hyundai-sonata-13.htm

Posted on Sep 16, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

The crank sensor is behind the timing cover, held in place by 2 10mm bolts. You need to remove the t-belt to access it. The torque for the crank bolt is about 120 ft-lbs.

LX trims have 2.7-liter, 170 horsepower V-6 engines--introduced that model year--with 181 ft. lbs. of torque.

The lug nut tightening torque 80 Foot pounds (Final torque).

---------

The exhaust manifold bolt torque:--

Oxygen sensor to exhaust manifold 29-36 Lb/FtExhaust manifold 18-22 Lb/FtNote:To torque bolts and nuts, start in center using crisscross pattern working outward.

----------

Check out.Keep updated.Thanks.





Posted on Sep 15, 2010

  • raj somaiya
    raj somaiya Sep 17, 2010

    Auto Tensioner Bolt :----14-20 (20-27) {{{{Ft. Lbs. (N.m)}}}





    Auto Tensioner Bolt :-----14-20 (20-27)


    Camshaft Sprocket Bolt :-----58-72 (80-100)


    Crankshaft Sprocket Bolt :-----116-123 (157-167)


    Crankshaft Pulley-To Crankshaft Sprocket Bolt :-----14-22
    (20-30)



    Front Case Bolt :------14-20 (20-27)


    Front Case Plug Cap :-------14-20 (20-27)


    Oil Pump Sprocket Nut :------36-43 (50-60)


    Tensioner Arm Assembly:-----12-19 (17-26)


    Tensioner Pulley Bolt :------31-40 (42-54)


    Tensioner Pulley Bracket Bolt :---17-20 (23-27)-------


    Timing Belt Cover Bolts:------Lower & Upper Cover (1)------


    Rear Left Cover------


    Lower 22-30 (30-42)-----


    Upper (2)------


    Right Rear Cover (2)---


    Timing Belt Idler Pulley Bolt:-----22-30 (30-42)------


    Water Pump Mounting Bolt:-------14-20 (20-27)----


    INCH Lbs. (N.m):----


    Valve Cover Bolts 71-89 (8-10)-----


    Water Pump Pulley Bolt 71-89 (8-10)----


    (1) Tighten
    to 71-89 INCH lbs. (8-10 N.m).-------



    (2) Tighten
    to 89-106 INCH lbs. (10-12 N.m).------


    ---------

    Thanks for keeping updated with your query.



    Auto Tensioner Bolt :----14-20 (20-27) {{{{Ft. Lbs. (N.m)}}}


    Auto Tensioner Bolt :-----14-20 (20-27)

    Camshaft Sprocket Bolt :-----58-72 (80-100)

    Crankshaft Sprocket Bolt :-----116-123 (157-167)

    Crankshaft Pulley-To Crankshaft Sprocket Bolt :-----14-22 (20-30)

    Front Case Bolt :------14-20 (20-27)

    Front Case Plug Cap :-------14-20 (20-27)

    Oil Pump Sprocket Nut :------36-43 (50-60)

    Tensioner Arm Assembly:-----12-19 (17-26)

    Tensioner Pulley Bolt :------31-40 (42-54)

    Tensioner Pulley Bracket Bolt :---17-20 (23-27)-------

    Timing Belt Cover Bolts:------Lower & Upper Cover (1)------

    Rear Left Cover------

    Lower 22-30 (30-42)-----

    Upper (2)------

    Right Rear Cover (2)---

    Timing Belt Idler Pulley Bolt:-----22-30 (30-42)------

    Water Pump Mounting Bolt:-------14-20 (20-27)----

    INCH Lbs. (N.m):----

    Valve Cover Bolts 71-89 (8-10)-----

    Water Pump Pulley Bolt 71-89 (8-10)----

    (1) Tighten to 71-89 INCH lbs. (8-10 N.m).-------

    (2) Tighten to 89-106 INCH lbs. (10-12 N.m).------

    ---------

    Thanks for keeping updated with your query.



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to know torque specs for hyundai accent g4eh engine main and bigend torques


torque hyundai accent Questions & Answers - Fixya

www.fixya.com > Forum > Tags
Torque specifications for cylinder head 2000 hyundai accent Are you aware that ... cover gasket on my 1997 Hyundai Accent GLS (engine code G4EH, 1.3L).

Hyundai Alpha engine - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Hyundai_Alpha_engine

WikipediaG4EH in a 1999 Hyundai Accent L ... lb·ft (132 N·m) at 4000 rpm, although some websites quote the torque rating as being 97 lb·ft (132 N·m) at 2700 rpm. ... 1992 Hyundai S-Coup? LS specifications - Carfolio.com · 1992 Hyundai S-Coup? GT ...

[PDF]AERA Torque Specs

www.aera.org/uploads/4/3/7/7/43776611/aera-torquespecs.pdf
AERA Torque Specs. 500 Coventry Lane, Suite 180, Crystal Lake, IL 60014. Toll-free Technical Hotline: 1-888-324-2372 (1-88-TECH-AERA). 815-526-7600 fax ...

.

Torque Specifications - AutoZone

www.autozone.com/.../Hyundai.../Specifications/Torque-Speci...

AutoZoneTorque Specifications. Print. Specific to: Hyundai ... Specific to: Hyundai Accent2006. Hyundai Azera 2006. Hyundai Elantra 2006. Hyundai Sonata 2006.

Club Accent Qu?bec • Consulter le sujet - hyundai motor s


Dec 29, 2015 | Hyundai Cars & Trucks

Tip

What you need to know about Hyundai


I am a mechanic ..most people ask questions about these foreign hyundai motors ..below is an example of engines that basically if you ask about a Hyundai Xg 350 ,xg300 ..well allow me to hammer 90% of your questions in case you want to grab another motor ..these motors listed will work on 90% of all hyundai products ...Look at the starter sizes ,,all the same for the selected models ..then look at the motor sizes ..This will help you in solving some problems most do not give the specific questioning
100% NEW REPLACEMENT STARTER
FOR
STARTER

12 VOLT / CW ROTATION / 8 TOOTH DRIVE

REPLACES:
MANDO M62957
VALEO TM000A14401
BOSCH REMAN SR4118X
BOSCH NEWMAN SR4118N
HYUNDAI 36100-37210

FITS ON:

HYUNDAI
2001 SANTA FE 2.7L ENGINE
2002 SANTA FE 2.7L ENGINE
2003 SANTA FE 2.7L ENGINE
2004 SANTA FE 2.7L ENGINE
2005 SANTA FE 2.7L ENGINE
2006 SANTA FE 2.7L ENGINE

2003 SANTA FE 3.5L ENGINE
2004 SANTA FE 3.5L ENGINE
2005 SANTA FE 3.5L ENGINE
2006 SANTA FE 3.5L ENGINE

2002 SONATA 2.7L ENGINE
2003 SONATA 2.7L ENGINE
2004 SONATA 2.7L ENGINE
2005 SONATA 2.7L ENGINE

1999 SONATA 2.5L ENGINE
2000 SONATA 2.5L ENGINE
2001 SONATA 2.5L ENGINE

2003-2008 TIBURON 2.7L ENGINE

2005-2008 TUCSON 2.7L ENGINE

2001 XG300 3.0L ENGINE

2002 XG350 3.5L ENGINE
2003 XG350 3.5L ENGINE
2004 XG350 3.5L ENGINE
2005 XG350 3.5L ENGINE

KIA
2004 AMANTI 3.5L ENGINE
2005 AMANTI 3.5L ENGINE
2006 AMANTI 3.5L ENGINE

2001 MAGENTIS 2.5L ENGINE

2002-2006 MAGENTIS 2.7L ENGINE

2001 OPTIMA 2.5L ENGINE

2002 OPTIMA 2.7L ENGINE
2003 OPTIMA 2.7L ENGINE
2004 OPTIMA 2.7L ENGINE
2005 OPTIMA 2.7L ENGINE
2006 OPTIMA 2.7L ENGINE

2002-2005 SEDONA 3.5L ENGINE

2005 SPORTAGE 2.7L ENGINE
2006 SPORTAGE 2.7L ENGINE
2007 SPORTAGE 2.7L ENGINE
2008 SPORTAGE 2.7L ENGINE

on Oct 24, 2013 | Hyundai Cars & Trucks

1 Answer

Where is the bank 1 sensor 1 O2 sensor located in a 2002 Hyundai Sonata V6?


Here's a picture to your cylinders,number one cylinder is at that side exhaust manifold,the sensor is screwed into it. Specifications Firing Order AutoZone com

Sep 17, 2015 | 2002 Hyundai - Sonata

1 Answer

2002 hyundai sonata lx will not shift gears automatically but will manually


Huyndai's are netorious for transmissions doing funny things if the Throttle Possition Sensor is bad. Not an expensive part that you could probably change yourself. It is an inexpensive try, if it does not remedy the situation. Also, the computers regulate shift patterns. You might unhook the battery and leave it unhooked for 30 min. or so, and see if it will re-learn shift points.

Feb 27, 2015 | Hyundai Motor 2002 Sonata

1 Answer

What is the torque specs for 2002 Sonata 2.4 dohc valve cover bolts?


Valve cover bolts are in most cases reusable unless rounded off or striped. If the bolts are m6 89in/lbs should be good m8 105 in/lbs.

Feb 18, 2013 | Hyundai Motor 2004 Sonata

2 Answers

I can't find the location of the crankshaft postion sensor in my 2000 Hyundai sonata


My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.

-- begine excerpt from 2000 Hyundai Sonata Repair guide --

The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.

--- end excerpt from 2000 Hyundai Sonata repai guide ---

Dec 29, 2010 | 2000 Hyundai Sonata

1 Answer

How do I replace the alternator in a 2002 hyundai sonata GLS v6?


For 2002 Hyundai Sonata 2.7L MFI DOHC 6cyl check this procedure...
Alternator - Removal
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    Negative battery cable Radiator mounting bolts, 1.6L only Alternator drive belt Alternator wiring harness connectors Alternator. It may be necessary to raise the radiator

    0e1822c.jpg
    Fig. Exploded view of the alternator-XG 300
Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Alternator drive belt Alternator wiring harness connectors Alternator. It may be necessary to raise the radiator
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Radiator mounting bolts, 1.6L only Alternator drive belt Alternator wiring harness connectors Alternator. It may be necessary to raise the radiator
  3. Install or connect the following:
    Alternator and reposition the radiator, if raised Alternator wiring harness connectors Alternator drive belt
  4. Adjust the alternator belt and torque the bolts to the following specifications:
    1. Accent: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment bolt to 14-20 ft. lbs. (19-28 Nm).
    2. 2.0L and 2.5L Sonata, Elantra and Tiburon: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment bolt to 105-132 inch lbs. (12-15 Nm).
    3. 2.4L Sonata: Pivot bolt to 26-41 ft. lbs. (34-54 Nm) and the adjustment bolt to 14-18 ft. lbs. (19-25 Nm).
    4. 3.0L Sonata and XG 300: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment bolt to 11-16 ft. lbs. (15-22 Nm).
  5. Install the radiator mounting bolts, if removed.
  6. Connect the negative battery cable.

Hope helps (remember rated this).

Jun 25, 2010 | Hyundai Motor 2002 Sonata

1 Answer

How to move out the gearbox of the car on sonata 2002 all bolts and support braket is out but i can't let's down the transmission


drop the subframe ,have you unbolted the torque converter from access through the starter motor hole

Aug 02, 2009 | Hyundai Motor 2002 Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,028 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...