Question about 2000 Ford Expedition

1 Answer

Hi! looking for an answer ti this case of ford expedition XLT. transmission problem, only the reverse gear functions. the drive and the rest doesn't. We already drained the transmission fluid and replace filter. mechanic of mine suggested to do transmission overhaul. Before we do that. maybe you have suggestions I can do first before going to the major job...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 881 Answers

Your transm. need to overhaul

Posted on Sep 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 ford expedition XLT triton v8. And it won't go into reverse but it goes into all the other gears fine but if I keep moving shift to D to R and sometimes it grabs but jerks and no R


Could be a stretched linkage or a broken ban
.. if it is the ban the transmission will be thunky and shift hard into other gears and eventually will go one gear after another... fatal to the transmission... but first check the transmission fluid to see if it smells funny


( burned)

Sep 02, 2015 | Ford Cars & Trucks

1 Answer

When decellerating to a stop my 2003 expedition shifts hard from 3rd to 2nd at about 20mph


The code is telling the fault and it is in the transmission control module. Have it checked out and replaced if necessary

Mar 05, 2014 | 2003 Ford Expedition

1 Answer

No reverse light, all fuse good. reverse Switch?


It's not that simple anymore . The transmission range sensor switch is what they have now . This range sensor informes the PCM - engine computer what gear the vehicle is in. When you put the gear selector into reverse B+ voltage from the range sensor to the PCM tells the PCM reverse has been selected , the PCM then will energize the reverse lamp relay (located in the under hood fuse/relay box) there by turning on the reverse lamps . There are two fuse's in the under hood fuse/relay box . F27 10amp. & F35 10amp.

Aug 11, 2017 | 2010 Ford Escape XLT

1 Answer

Reverse Light doesn't work, fuse good and bulb to.


I haven't worked on an escape, but i can tell you that switch is on the transmission.

Jun 02, 2013 | 2010 Ford Escape XLT

1 Answer

Have 1999 Ford Expedition xlt. My gear indicator is messed up, When I am in drive, it shows 2, when i am in park it shows reverse.


This comes straight from the repair manual..
1. Remove the upper steering column cover.
2. Put the shifter in drive position.
3. Move the shift lever clockwise until it stops (all the way to first gear position, then move it back two detent positions to the Drive position.
4. Hang an a weight (something) with 8 pounds of weight on the lever to hold it in place.
5. Center the indicator neddle in the middle of drive position.
6. Rotate the thumbwheel on the bottom of the steering column to remove all slack from the indicator cable.
7 Install the upper steering column cover.

Jan 16, 2010 | 1999 Ford Expedition

1 Answer

My 2000 Ford Expedition XLT will not go into P,R,N,D,2 and 1..


You know,i had kind of the same problem with my 2000 f150,just incase you didnt check this,look under the dash at the bottom of the steering column,there is a bracket that bolts on with 2 torque bolts at ( t-25 or t-30) the shift cable connects to that bracket and when it loosens up it wont go into park or if loose enough it may not shift to reverse either.An easy way to tell if its loose is if the shift lever feels loose or real easy to move.Also at the transmission where the shift cable connects there is a plastic holder with groves on it for adjustment,dont try adjusting it but inspect it if its loose or broken,if you try adjusting it then its tough to get it back where it needs to be for all the gears to work with the shift indicator tab,about it not starting,that may have to do with the safety neutral switch on the transmission,but double check the linkage to make sure its really tight before worrying about that switch,im not always on line these days but i will help more when i can.Good luck

Nov 08, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...