Question about 2002 Chrysler Voyager

1 Answer

Hi. In a chrysler voyager 2.4 l from 2002 the temp gauge only reads the right temp, if the ignition key is on and the engine is not working,if i start the engine the water temp gauge starts to go down, even when the car is overheating because the radiator fan only work if turn the ac on,the water temp sensor near the t-stat the fan relay as well as the pcm are new,any idea of what can be the problem?

Posted by on

  • Anonymous Mar 26, 2014

    temp gauge going to hot fast

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! May I asked when did you purchase the PCM? Eventhough the PCM is new it is not free from failures. That's the downside on buying new PCM, sometimes it doesn't work right. I suggest that you have it replaced or resetted.

Posted on Sep 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the temp gauge sending unit(s) located?


They are usually located at the top of engine very close to the thermostat. It should make your gauge go down if you unplug wire connector from sending unit. If so sending unit is bad. GOOD LUCK FRIEND.

Sep 15, 2014 | Cars & Trucks

1 Answer

How do i get the wiring for gauges in 97 plymouth


with the ignition key off, press the "trip" button on the instrument panel, and while holding the button, turn on the ignition. the panel will do a self test of all lights and indicators. if the ones in question don't work, then it is a problem with the instrument panel itself. if they work, then you can look for shorted wires. I have technical info for most chrysler products so if it turns out that you need wiring diagrams or pinouts etc, I'm your man. good luck

Feb 27, 2013 | 1997 Plymouth Voyager

1 Answer

Dash board gauges not working on voyager 2000


You need to check your main fuses under the hood first and then check them under the driver side dash board.

Jan 25, 2010 | 2000 Plymouth Voyager

1 Answer

All gauges..gas,speedometer,temp,odometor...won't work.


the problem might be in the ignition switch(not where the key goes) but what the key switch is connected to. just try this first, when the gagues stop working, hit the steering column behind the key switch and if the gagues start working then replace the ignition switch

Mar 27, 2009 | 1997 Chrysler LHS

1 Answer

While I was driving my 2002 Voyager the fuel,temp and speedometer gauges stopped working, then I went to turn and noticed the turn signals also were not working. Then I went to turn on the hazards and...


It sounds like your ignition key isn't returning all the way back from the start position to the run position because the return spring has gotten weak. The next time it happens try turning the key back to the run position.

Mar 09, 2009 | 2002 Chrysler Voyager

1 Answer

97 Plymouth Grand Voyager dash board probleme!! Please HELP


With all those problems, it is most likely a body control module gone bad. You would have to take it to a Chrysler dealer to verify.

Mar 06, 2009 | 1996 Plymouth Voyager

1 Answer

Chrysler voyager 2.8crd diesel warning noise and undefinedcontrol


This is just the cabin heater light, it tells you that the electric cabin heater is active and the alarm sound is normal this contiunes until this heater has cooled down again usually 5-10 mins after the engine has reached operating temp. or if you turn off the ign. berfore engine reaches temp. This heater works as a booster to the normal heater matrix fitted that works off the engine coolant temp. or as the sole heater if engine is cold when outside temp is low (ie oct - may) and there is more than 100 miles or 1/4 tank of fuel left.

Feb 11, 2009 | 2001 Chrysler Voyager

Not finding what you are looking for?
2002 Chrysler Voyager Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...