Question about 1990 Honda Accord
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
To Remove Door Panel on 2001 Honda Accord:
A: To remove the plastic piece with the door lock button and door handle connected to it:
1- Remove the screw in the middle located behind a plastic cover button
2- Push (slide) the whole assembly Forward (toward front of car)
Besides the screw, it is held in place by 3 hooks on the backside that hook into holes in the metal door frame
3- Now unhook handle from small metal bar going through door by pushing (toward door) plastic clip (blue?) off of the bar, then the bar will come out of the clip hole, thus releasing the handle.
4- Depress little grey button /bar (purple painted on it)on elec. connector to seperate connector, thus releasing door lock switch
Now the whole assembly (metal handle, door lock switch, and plastic piece) will come off door panel
B: The door is held on by 2-screws, 7-plastic snaps/plugs, and 1-plastic plug.
The screws are located: bottom of hand hold and the other behind the handle, both covered by little covers that have to be pryed off to access the screws.(hint: the screw with the built in spacer goes behind the handle when you are trying to reinstall)
The 7-plastic snaps: 3 across bottom and 2 on each side. Not visible, they are mounted to the inside of the panel.
The 1-plastic plug is visible at the upper front of the panel and is the same color as the surrounding trim
C: Take off the big plastic triangle piece above the door panel and behind the mirror. Pull/pry off. It has 2 snaps holding it on. one near bottom and one near the front.
D: Light lens prys off from bottom. Unscrew (1/4 turn) the light assembly with bulb still intact from backside of panel
E: Remove the Hand-Hold/window switch assembly:
Posted on Apr 27, 2009
Check the prones inside the connector that you plug into the brake light module. You may have to squeeze, wiggle, tilt each one to see which one is not connecting all that good. I know it may sound confusing. I tried to explain the best of I could.
Posted on Apr 29, 2009
remove crossmember, axles, cables, tranny mount bolts (3), tranny to engine of course bolts
Go to autozone.com and register for full free online repair manual
Posted on Sep 11, 2009
Check 7.5 fuse (#8) inside the car by your left foot and check the 30 amp fuse in the engine compartment (according to your diagram on the inside of your fuse box lid).
You can replace the fan motor pretty easy but you'll want to unplug it and test it first by running an automotive battery to the plugs of the fan with 2 jumper wires. The fan is above the right foot of the passenger area. There are three 8mm screws to remove then it drops out. Careful with the wiring.
If your fan is still good, you'll have to consider removing your knob and switch assembly to see if something is unplugged in there. Good luck.
Posted on Oct 03, 2009
no, 12mm wrench or ratchet on 12mm socket. the piston is tough to push back in. its a twist in type and you will need some force to push and twist the piston back in. - note rear brake pads wearing out on the new 08-09 accords are very common and if under 16-18 thousand miles it may be covered. honda knows about this problem
Posted on Oct 27, 2009
Tips for a great answer:
Dec 16, 2015 | 2002 Honda Accord
Nov 03, 2017 | 1990 Honda Accord
Dec 29, 2010 | 1990 Honda Accord
Oct 18, 2010 | 1992 Honda Accord
Nov 16, 2009 | 1990 Honda Accord
Nov 10, 2009 | 1993 Honda Accord
Sep 16, 2009 | 1990 Honda Accord
Jun 13, 2009 | 1991 Honda Accord
Dec 15, 2008 | 1986 Honda Accord
Jul 15, 2008 | 1990 Honda Civic
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: