Question about 1994 Chrysler Concorde

1 Answer

I know i need a tuneup but what i don'tknow is how to do it i have a 1998 Chrysler concorde i have done lots of tuneup before but this one i dont know

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

Hmm, Let me guess, Sideways V-6, can't reach rear plugs? In most cases on these you have to remove the air intake system to get to the plugs. Everything else is basically the same as any other vehicle. There is no timing adjustment because that is electronically controlled although it can still be checked. If it isn't a sideways V-6 it's the same as any other tune up except for setting the timing part. I will try to answer any questions you have about the process however, if it is something specific to the Concorde I recommend you get the Haynes Repair Manual on the vehicle for step by step instructions. If the vehicle does have a Distributor cap and Rotor instead of a coil pack then everything is the same as a regular engine to include setting the timing.

Posted on Sep 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing the power steering pump


Here's a link on how to remove power steering pump,and to the left of page,click on bleeding to finish job,have a great weekend.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f802d67fe

Oct 20, 2012 | 1998 Chrysler Concorde

3 Answers

Where is the thermostat located on a 1998 chrysler concorde 3.2 L V6


it is located under the intake u have to take the intake off to get to it i hope this helps any other questions feel free to ask

Dec 30, 2010 | 1998 Chrysler Concorde

1 Answer

My 98 concorde will turn off sometimes when reaching a stop or slowing down. It starts back on but I dont know the problem and how to fix it. I was told it could be a sensor.


Begin by doing these two things. change the fuel filter and treat your fuel with a product called seafoam, available at most auto parts stores. J.

Jun 29, 2010 | 1998 Chrysler Concorde

1 Answer

Can i recharge the ac on a 1999 chrysler concorde myself thanks and is it r12 0r the r134


The equipment needed is too pricey to go buy it yourself to fill it back up Its a lot cheaper to get your local garage to do it that way you know its done correctly and at a cheaper cost.

Jun 21, 2010 | 1999 Chrysler Concorde

1 Answer

My 1998 Chrysler Concord LXi blast heat on high


Sounds like your blower control modular. It is located on the passager side floor under the dash. If you can find the blower motor and follow the wires back from it will lead you right to it (about half a foot away from it). It plugs into it. and has two screws you will have to remove to get it out. The two screws can be kinda hard to get to and you will have to get the modular from the dealer but if you can change it this should fix your problem.

Mar 26, 2010 | 1998 Chrysler Concorde

1 Answer

Code p1698 for a 1998 chrysler concorde 2.7 i dont know what it means and noone seems to be able to tell me


Code p1698 means there is no digital data being recieved from the transmission control module to the power train or the other way around.
Take it and have the wire harness checked between the two modules, might have bad connection or bad wire. Also have the two modules checked, one might be bad.
They are expensive, so it's best to find out which one is bad, if it's not a bad wire, or dirty connection.

May 09, 2009 | 1998 Chrysler Concorde

1 Answer

Low freon on a 1998 chrysler concord, where is the low pressure l


low refrigerent in a concorde was USUALLY caused by a leaky evaorator a big job at best and best left to a pro

Mar 28, 2009 | 1998 Chrysler Concorde

1 Answer

Engine light on and transmission will not shift out of low gear tcm? 2003 chrysler concorde.


You will need to get the diagnostics done for the check engine light and get a transmission flush for yoru car.

You can save some money by checking a new website http://prundo.com/ for free coupons for check engine light and transmission flush. This website also has lots of fee coupons for other auto repair!

Mar 11, 2009 | 2003 Chrysler Concorde

1 Answer

1998 Chrysler Concorde


why is change termostate?

Aug 16, 2008 | 1998 Chrysler Concorde

1 Answer

1998 chrysler concorde


tammy i found some codes but u wont answer the phone...

Jul 02, 2008 | 1998 Chrysler Concorde

Not finding what you are looking for?
1994 Chrysler Concorde Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...