Question about 1999 Honda CR-V

Open Question

1999 HONDA CRV TIMING BELT REPLACEMENT - 1999 Honda CR-V

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 66 Answers

SOURCE: 1999 honda crv timing belt

PATH: Engine Mechanical > Engine Mechanical Components > Timing Belt & Sprockets > Removal & Installation Removal & Installation

  1. Disconnect the negative battery cable.
  2. Position crankshaft so that No. 1 piston is at Top Dead Center (TDC).
  3. Remove the splash guard.
  4. If equipped, remove the cruise control actuator.
  5. Loosen and remove the power steering pump drive belt.
  6. Remove the two bolts that attach the top power steering hose to the power steering pump. Cover and seal the hose and the open port of the pump.
  7. Clamp shut the power steering reservoir return hose, remove it from the return line, and remove the power steering pump and reservoir as an assembly.
  8. Remove the remaining accessory drive belts. Refer to Section 1 for specific details.
  9. Place a piece of wood between the oil pan and the jack, support the engine with a jack.
  10. Remove upper engine bracket.
  11. Remove the valve cover.
  12. Make sure the engine is at Top Dead Center (TDC) for No. 1 cylinder. The engine is at TDC for No. 1 cylinder when:
    • The white Top Dead Center (TDC) mark on the crankshaft pulley is aligned with the raised pointer.
    • The UP marks on both camshaft sprockets are at the topmost (12 O'clock) position.
    • The holes in the No. 1 exhaust and intake cam journals align with the holes in the camshaft. A 4.5 mm or 5/32inch drill bit or Allen key can be placed through the holes to prevent the cams from rotating while removing or installing the cam belt.
  13. Remove the crankshaft pulley. For details, see crankshaft pulley removal in this section.
  14. Remove the timing belt covers.
  15. Loosen the adjusting bolt 1/2-1 turn. Release the tension from the belt by pushing on the tensioner, then retighten the adjusting bolt.
  16. Remove the timing belt.
79245g44.gif

To install:

  1. Be sure the timing marks are properly aligned.
  2. Install the timing belt around the crankshaft sprocket and then stuff a clean rag or paper towel between the belt and the sensor guard to hold the belt engaged with the sprocket teeth.
  3. Place the flat side of the belt clockwise around the top of the tensioner and then engage the toothed portion of the timing belt counterclockwise around the bottom of the water pump sprocket.
  4. Carefully pull the timing belt upward but do notmove the crankshaft. If the crankshaft moved, carefully realign the crankshaft timing belt sprocket with the TDC marks. Carefully engage the teeth of the timing belt onto the exhaust camshaft sprocket, but only install the belt about 1/3 of the way onto the sprocket.
  5. Grasp the timing belt on the toothed side and gently lift the belt enough to begin sliding it onto the intake camshaft sprocket.
  6. Once the belt has started to slide onto the intake camshaft sprocket, slide the belt equally onto both the intake and exhaust camshaft sprockets.
  7. Quickly loosen and then retighten the timing belt tensioner bolt.
  8. Remove the tools from the camshaft caps used for securing the camshafts, and remove the cloth used to keep the timing belt engaged in the crankshaft sprocket.
  9. Apply a clockwise load on the intake camshaft sprocket bolt to remove any slack between the intake camshaft sprocket, exhaust camshaft sprocket and the crankshaft timing belt sprocket, then loosen and retighten the timing belt tensioner adjusting bolt to allow tension to be applied to the belt.
  10. Install the crankshaft pulley sprocket/timing belt guide washer.
  11. Install the lower and upper timing covers.
  12. Install the crankshaft pulley and tighten the bolt to 130 ft. lbs. (177 Nm).

    WARNING

    If any binding is felt when adjusting the timing belt tension by turning the crankshaft, STOP turning the engine, because the pistons may be hitting the valves.

  13. Rotate the crankshaft about 5-6 times counterclockwise to seat the timing belt.
  14. Position the No. 1 piston to TDC.
  15. Locate and remove the rubber plug for the timing belt tensioner on the lower timing belt cover.
  16. Loosen the adjusting bolt 1/2 turn by
  17. Rotate the crankshaft counterclockwise 3 teeth on the camshaft pulley.
  18. Tighten the adjusting bolt to 40 ft. lbs. (54Nm).
  19. Retighten the crankshaft pulley bolt to 130 ft. lbs. (177 Nm).
  20. Install the valve cover.
  21. Install the engine mounting bracket, then remove the jack.
  22. If removed, install the cruise control actuator.
  23. Install the accessory drive belts.
  24. Install the splash guard.
  25. Connect the negative battery cable.
  26. Check the engine operation and road test.

WARNING

Never allow antifreeze, oil or solvents to come into with a timing belt. If this occurs immediately wash the solution from the timing belt. Also, never excessive bend or twist the timing belt; this can damage the belt so that its lifetime is severely shortened.
9d66148.gifeab7aab.gif

Posted on Sep 15, 2010

mas66
  • 104 Answers

SOURCE: 95 honda civic timing belt replacement process

If you have never changed a cambelt (timing belt) then it is not recommended that you attempt it. It is a job for a mechanic, as getting the cam timing wrong on reassembly is easy to do and can have disastrous consequences. It is easy enough once you know how, and if you are reasonably mechanically able, I'd suggest getting a repair manual for your vehicle that has a step by step procedure for timing belt replacement. Companies like Haynes produce very good repair manuals.

Posted on Oct 25, 2008

  • 333 Answers

SOURCE: Replace Timing Chain for 2003 Honda CRV?

Rule of thumb this is a timeing belt and it should be changed every 75,000 mile as a general practice. I hope this helps, dont forget to rate my answer, thanks

Posted on Feb 20, 2009

  • 8 Answers

SOURCE: 1999 Honda crv timing belt replacement

1. Remove the 14mm bolt.
2. Remove the spring holding onto the tensioner
3. Remove the tensioner
4. Installation is the reverse.

I install a new tensioner with every timing belt job.

If you have more than 130K miles, I would replace the cam seals. Its extra insurance against future leaks.

Posted on Mar 22, 2009

carlsbiz
  • 1124 Answers

SOURCE: does my 2005 honda crv have a timing belt and when

That car has a timing chain ;o)

Posted on Jul 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 honda accord vtech timing belt marks


The Honda F23 series engine is a 2.3 liter, all aluminum block, 16 valve, Single Overhead Camshaft (SOHC) motor used in the Honda Accord (1994 - 2002) and Acura Cl (2.3). Timing belt failure may result in either the intake or exhaust valves bending after contacting the pistons. If the belt has broken, a Compression Leakage test is advised to determine if the valves require replacement. Compression leakage from any of the cylinders (indicating bent valves) will require the removal of the cylinder head. An inspection and rebuild of the head by a reputable automotive machine shop is recommended in lieu of doing it yourself. This DIY article only covers belt replacement. The belt replacement interval is either 90,000 or 105,000 miles based on the specific model year. Check the owner's manual for the specific service interval. If the mileage is below the threshold but the vehicle is over 7 years old, consider performing a replacement as preventative maintenance (PM). Timing belts cannot be visually inspected for wear. Moreover, a visual inspection would require the removal of the timing belt cover which in itself is time consuming and better spent working on replacement. A typical timing belt component kit consists of: 1. Timing Belt 2. Balance Shaft Belt. 3. Timing Belt Tensioner Pulley. 4. Balance Shaft Tensioner Pulley

Sep 28, 2016 | 1999 Honda Accord

1 Answer

Can smell my radiator but not running hot also checked has plenty of fluid. engine light is on .


WATER PUMP HAS A BUILT IN "WEEP HOLE" AT BOTTOM OF PUMP. YOU NORMALLY SEE SMALL SPOTS OF ANTI-FREEZE, BUT IF IT IS DRIVEN OFF THE TIMING BELT IT IS BEHIND PLASTIC COVERS. LOOK AT LEFT(DRIVERS) SIDE...WHICH IS FRONT OF ENGINE FOR DRIPPING FROM LOWER TIMING BELT COVER.

Jul 21, 2013 | 1999 Honda CR-V

2 Answers

When to replace timing chain on 2004 Honda CRV


Hi should be done every 100,000kms my husband says and has always done so on all his cars, says it;s cheap insurance.Margaret

Jul 17, 2010 | 2004 Honda CR-V

1 Answer

How to put the belt right on honda crv 99


Your local Napa store can print you out a routing diagram, but first check around under your hood, most cars have a routing sticker.

Dec 19, 2009 | 1999 Honda CR-V

1 Answer

What needs to be done at 100,000km service for Honda crv 1999


What I would do, if you haven't, yet is do a total tune up. Change the oil, oil filter, PCV valve, air filter, spark plugs and spark plug wires, timing belt, distributor, and recently I heard that adjusting the valves at that (100,000) point will also prolong the engines life, the timing belt and valve adjustments seem to be the hardest to do. This is what i did to my 1999 honda cr-v except the valve adjustment, Im not good enough to mess with that on my own. Doing it myself turned out pretty cheap, and easy, just time consuming. good luck!

Oct 08, 2009 | 1999 Honda CR-V

1 Answer

The check engine light just came on? My crv is at


is it the check engine or service light timing belt eplacement is crucial make sure the tensioner idler and water pump are replaced as well

Sep 13, 2009 | 1999 Honda CR-V

1 Answer

03 CRV - is there a timing belt and does it need replacement - what is recommended on water pump (no problems with it)


FOR YOUR YEAR AND MODEL T/BELT IS 60,000MILES(100,000KM)AND I WOULD RECOMED YOU ALSO DO THE WATERPUMP AS IT WILL GO BETWEEN NOW AND THE NEXT BELT CHANGE

Jun 30, 2009 | 2003 Honda CR-V

1 Answer

1999 Honda crv timing belt replacement


1. Remove the 14mm bolt.
2. Remove the spring holding onto the tensioner
3. Remove the tensioner
4. Installation is the reverse.

I install a new tensioner with every timing belt job.

If you have more than 130K miles, I would replace the cam seals. Its extra insurance against future leaks.

Jan 30, 2009 | 2004 Honda CR-V

1 Answer

CRV Not Idling Correctly


Hook it up to a computer to see what codes pop up. This will tell you whats going going on. possibly its a speed sensor that is on the air intake area. Get a bottle of Lucas Injector cleaner, this helps clean out the injectors and the crud they collect.

Jun 12, 2017 | 1999 Honda CR-V

Not finding what you are looking for?
1999 Honda CR-V Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...