Question about Nissan Murano

1 Answer

How do i change brake light bulb on 2003 nissan murano

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

To change any of the three tail light bulbs, open rear hatchback locate the thin black strip (approx. 2"W x 21"L) between the body and the tail light assembly. Next, simply pry off black strip with a small screwdriver wrapped with a rag as to not chip the paint (strip is held on by two clips). Remove the top and bottom bolts (the 2 middle bolts don't need to be removed). Next grab the lens assembly from the top and bottom and gently pull away from the body. Once the lens is separated from the vehicle simply twist the bulb socket counterclockwise to remove the bulb from the lens assembly.

Posted on Sep 15, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1986 Answers

SOURCE: how do i change headlight on a 2003 Murano

To change the headlight bulbs, you will need to remove the wheel liner cover to gain access to the back of the headlamp assemblies. Then you can pull off the screw cap / cover that seals the bulb into the headlamp assembly for the bulb you want to change. Once the cap is off, you will need to disconnect the harness from the back of the bulb. With the harness off, you will then need to either twist a black lock ring to release the bulb, or you will need to push on a metal lever to release the bulb (this varies on models and high and low beams).
Install in the reverse order....

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset the, SERVICE ENGINE SOON light on a 2003 Nissan Murano.


Take your Murano to a trusted repair shop and have the problem corrected. The light should be off when you get it back.

Feb 10, 2016 | 2003 Nissan Murano

1 Answer

Replace a brake light, how do you remove the lens?


Hi there,

Well you can please follow the below link -
1. Open the rear hatch of the Murano.
2. Remove the screws holding the rear trim covers in place.
3. Pull off the rear trim covers to expose the rear taillight housing assembly.
4. Remove the power connector running to the brake light ballast.
5. Turn the brake light counterclockwise with your hand, and remove the light from the housing assembly.
6. Install the new brake light. Installation is in reverse of removal. Post comments for more help or information......

Good Luck!!

Mar 28, 2010 | 2003 Nissan Murano

2 Answers

How do i change headlight on a 2003 Murano


To change the headlight bulbs, you will need to remove the wheel liner cover to gain access to the back of the headlamp assemblies. Then you can pull off the screw cap / cover that seals the bulb into the headlamp assembly for the bulb you want to change. Once the cap is off, you will need to disconnect the harness from the back of the bulb. With the harness off, you will then need to either twist a black lock ring to release the bulb, or you will need to push on a metal lever to release the bulb (this varies on models and high and low beams).
Install in the reverse order....

Nov 16, 2009 | 2003 Nissan Murano

1 Answer

Replacing the rear parking light


Remove the finisher panel - its a long black plastic cover on the light housing - (pop it off) from the inner edge of the taillight, remove the screws.

Dec 01, 2008 | 2005 Nissan Murano

1 Answer

2006 nissan murano headlight out


Bulb can be replaced. You can buy at Walmart or your local parts store. I recommend replacing both. They are rated for the same amount of run hours and will usually fail within the same month.

You can also buy from this link.
http://www.partsgeek.com/gbproducts/YN/B18919-HEL-P8040.html?utm_source=google&utm_medium=ff&utm_term=06+2006+Nissan+Murano+Headlight+Bulb+Hella+Nissan+Headlight+Bulb&utm_content=YN&utm_campaign=PartsGeek+Google+Base

Nov 18, 2008 | 2006 Nissan Murano

1 Answer

Fog light bulb replacement


This bulb can be replaced without removing the washer fluid reservoir. There are 3 screws that go through the bottom edge of the bumper cover into the right inner fender guard. Remove these screws and pull the inner fender down to gain access to the back side of the fog lamp and remove the bulb.


Nissan Scope Technician- 10+ years experience in Nissan dealership.

Nov 04, 2008 | 2003 Nissan Murano

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...