Question about Chevrolet C2500
First thing, find your fuel filter (drivers side frame rail, about center in the truck...looks like a metal can in the middle of a metal line) and clean the exterior and the area around it so you don't get particulate matter into the new one or the line. Next, pull the fuel pump relay and start the engine. It will die, but it depressurizes the fuel line. Turn everything off, replace the relay, and you can proceed to remove the fuel filter with a couple of wrenches. On occasion, you'll find one with a different type of connector, so make sure you know how to release anything different before you start. Put the new one on, and turn on the ignition switch to run, (don't start it yet) then off, and repeat a couple of times to prime and pressurize it again. Then start, and check for leaks.
Posted on Sep 15, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 30, 2015 | Cars & Trucks
Jan 17, 2011 | 2000 Chevrolet Suburban
Aug 10, 2010 | 1996 Chevrolet C2500
Oct 17, 2009 | 1996 Chevrolet Suburban
Mar 24, 2009 | 1997 Chevrolet Suburban
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: