Question about 2000 Oldsmobile Bravada

1 Answer

My ignition will not turn back so I can get my key out

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 449 Answers

Time tto replace ignition swith

Posted on Sep 15, 2010

  • steve682 Jan 04, 2011

    The ignition will not turn all the way off if there's little or no battery power in my 99 Bravada. I have to jump start it, or put a new battery in to get the ignition turned all the way off (to get the key out)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a transponder key for the ignition in a 2009 Pontiac Vibe?


first the first digit must start with the number 1,or 4 of your 17 digit number for this to work.so fit your chip key in your ignition.
1, insert the key in your ignition turn the key to on for 10 min 30 seconds
2, within 45 seconds turn the key to off then back on for 10 min 30 seconds
3, within 45 seconds turn the key to off ,then back on for 10 min 30 seconds then back on for 10 min 30 seconds.
then after 10 min 30 seconds turn off then on .then start the engine.

Dec 17, 2014 | 2009 Pontiac Vibe

1 Answer

The car will not turn off the key is not stuck, I can take the key out but it won't turn back far enoug


Replace the ignition switch, Not the key part. It has fell apart on the inside .

Sep 07, 2014 | Ford Focus Cars & Trucks

4 Answers

Ignition key won t turn


The ignition key won't turn likely because the shifter linkage that locks the key in OFF is worn or loose. Move the shifter linkage hard to the Park position and the key will turn. Have the linkage adjusted and the worn parts replaced

Mar 30, 2014 | 2000 Mercury Grand Marquis

2 Answers

2003 range rover ignition key off power still key stuck in position 1


some of these electric interlocks require the brake pedal stepped on for releasing..have you tried that? along with shifting fully into park a few times?

Jan 26, 2014 | Cars & Trucks

1 Answer

Key is stuck in ignition barrel ,vt commodore


vt have a nasty problem of snapping inside the back of the ignition,there is a black plastic back on the ignition this is broken try and pry this off then it should release the key ,but dont turn the key forward ,this will wreck the ignition turn it backwards

Apr 09, 2012 | Cars & Trucks

1 Answer

Programming ingition key with a chip in it



  • For 1998 and newer Fords there is no way to program a new Transponder key unless you have two already programmed keys. 1998 and older you could do this in about three minutes. This one has to be hooked up to a scanner.

  • Now if you do have two keys already programmed then follow these steps.
  1. Insert first programmed key in the ignition.
  2. Turn the ignition to start (run) for two seconds and back to off. The ignition should stay on for at least one second.
  3. Remove that key and within 10 seconds stick the second programmed key into the ignition. Turn the ignition to start (run) for two seconds and back to off. The ignition should stay on for at least one second.
  4. Remove the key.
  5. Now insert the key needing to be programmed into the ignition (within 20 seconds) and turn the ignition to start (run) for two seconds and then back off.
  6. The security light will light up for 3 seconds indicating the key is now programmed.
  7. Now wait a couple minutes before starting your car and your done.
  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 06, 2011 | 1999 Lincoln Continental

1 Answer

Key stuck in ignition and wont go into lock position


If you have the key tfat broke off stick it in ignition and push in to turn back or wiggle steering wheel back and forth while you turn key back if that dont work tou will have ti replace ignition switch.Thanks

Apr 27, 2010 | 2004 Mitsubishi Galant

1 Answer

Car immobilisor


you might be able to reprogram the key, but you can only do this if you have two keys, what you need to do is put one key in the ignition turn the ignition on ( not over ) put the key that needs reprogramming into the drivers door and lock the vehicle with the key not the button, wait 10 seconds, remove the key, then press the unlock on the fobb, turn ignition off, remove key from ignition, put in the key that you just unlocked the car with and turn ignition do not turn over, turn off ignition,remove key wait 10 seconds, then put key back in then you should be able to turn it over as normal, if that does not work you will have to take key to be reprogramed at the main dealer...hope this helps

Feb 13, 2010 | 1995 Volkswagen Golf

1 Answer

How do I program my key for my 2006 Chevy Impala?


Add Duplicate Key (PK3 or PK3+ key)
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.
Originate New Master Key (PK3 or PK3+ key)

1. Insert new key into ignition cylinder and turn it to the ON (RUN) position.
The security light on the dash will illuminate and stay on for ten minutes.
2. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back to the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
3. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back on the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
4. After the security light has gone off the third time, the key has been programmed
into the vehicle’s computer and will operate the car. It has replaced ALL the
previous electronic key codes and is the ONLY key programmed into the
vehicle’s computer.

Add Duplicate Key (PK3 or PK3+ key)

1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.

May 20, 2009 | 2006 Chevrolet Impala

Not finding what you are looking for?
2000 Oldsmobile Bravada Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...