Question about 1989 Ford LTD

1 Answer

How do i take out my alternator in 1989 crown vick ok i just found out my alternator is killn my battery so i would like to know how can i take the old one out and replace it with a new one

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 449 Answers

Disconnect battery disconnect connector to altinator disconnect battery connection on altinator loosen serpenten belt from altinator loosen bolts and remove old altinator install new altinator and work back to start of unistalling

Posted on Sep 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas gauge doesnt work


Most likely the Float in the tank is bad and to find the Float,Put the car on a Car Rack get under at the tank and it should have a place on upper left to REPLACE THE fLOAT,BUT YOU NEED TO GET MOST OF GAS OUT OF TANK and good luck on finding a float for 89 Crown Vick.

Dec 10, 2010 | 1989 Ford Crown Victoria

1 Answer

Replaced alternator but battery keeps running down overnite. what should i check for next? was told that this model ford has an internal and external voltage regulator for the alternator. not sure i...


You will need to disconnect the battery cable...doing this in a dark area is helpful, but while doing this watch for spark. Touch the terminal to the battery a couple of times to determine the spark. If you see a spark, you have a drain. Now, you will have to go to your fuse panel and start unplugging one fuse at a time while repeating the process at the battery until the spark stops. After, you find out which fuse is causing the drain, you will now have to look on the panel or Shop electrical manual and see what this fuse supplies and now start disconnecting the devices that are on that circuit until you have found that source of your problem. It may take a while to eliminate the device, so you might want to just unplug the fuse that you found at fault every night until you encounter the correct componet.

Nov 23, 2010 | 1989 Ford Crown Victoria

1 Answer

Change a starter on a 86 crown vick


It is not a bad job to do. Unhook the battery and remove the cable from the starter. Then unbolt it. Two bolts with 1/2 inch heads

Apr 14, 2010 | 1986 Ford Crown Victoria

1 Answer

2004 crown victoria heater fan not working, fuses OK. motor OK Power at motor, No ground at motor. Is the problem a resister.


You are most probably correct, fan motor resistor is usually found at the top center of firewall in engine compartment.

Aug 02, 2009 | 1989 Ford Crown Victoria

1 Answer

Brake lights not working


Check the fuses, and check the brake light switch, which is usually found up under the dashboard attached to the pedal arm. Make sure the connector in OK, the switch activates with the movement of the pedal. failing that replace the switch.

Hope this is of some assistance.
Ed

Apr 20, 2009 | 1989 Ford Crown Victoria

2 Answers

1992 crown vic 4.6l


did you check the inertia switch?? that's what happened to mine

Jul 25, 2008 | 1992 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...