Question about 2001 Chrysler Voyager

1 Answer

Rear brakes chrysler voyager 05/01

I have been trying to replace the rear brakes on my Chrysler voyager and I can't remove the caliper that holds the disc brake pads. Any tips would be appreciated. Cheers

Posted by on

  • 2 more comments 
  • ton77 May 17, 2008

    Thanks for trying Motorhead76 but the caliper is fixed to the whole wheel assembly. There are no two bolts to remove like the usual calipers. Anymore input?

  • Anonymous Mar 24, 2014

    My 01 Chrysler Voyager starts then after a few mins it dies

  • Anonymous Mar 24, 2014

    My 01 Chrysler Voyager won't stay on after a start

  • Anonymous Mar 25, 2014

    just had new discs and pads fitted and front o/s sticking on



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 38 Answers

There should only be two bolts on the back of the caliper holding it into the knuckle. Removing those two bolts should free the caliper. In fact I believe they're 12 or 13 millimeter bolts.

Posted on May 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have 2002 chrysler grand voyager 3.3 litre auto. abs light came on and is gone now , but there is a lot of vibration and rattle when i press brake. What do i do?

Inspect both the front and rear brakes. Including rotors, drums( if equipped in rear), abs sensors and wiring to the sensors, and brake pads/shoes. Also be sure to remove the calipers and look at the brake pads to check for worn out or uneven wear and replace if necessary. Hope this helps

Nov 27, 2014 | Chrysler Town & Country Cars & Trucks

1 Answer

Chrysler Voyager Rear Brake Caliper Pins have

not grind, just try to change a new brake caliper assembly, the pistons are important, make sure it won't leak oil.

Sep 30, 2013 | 2004 Chrysler Voyager

1 Answer

I'm changing the rear brakes on my 2000 Chrysler Concorde 2.7L V6 DOHC--removed the caliper and brake pads but not sure how to remove the rotor? Can anyone help?

If the caliper is loose after taking off the caliper then all you gotta do is remove the caliper housing. The part the caliper is bolted to. It's usually two big 16 or 17 mm bolts.

Mar 17, 2010 | 2000 Chrysler Concorde

1 Answer

Torque for pyutting new rear brakes and rotors on a 2006 Town&Cou

Caliper mounting bracket bolts 125 ft, Caliper guide pins/bolts 26 ft, Brake hose to caliper 35 ft. Wheel lug nuts 100 ft. Wheel speed sensor 115in lbs*** This is for disc rear brakes Teves system. You do know that the rear disc is a Rotor/Drum. The parking brake shoes ride on the inside.

Jan 22, 2010 | 2006 Chrysler Town & Country

1 Answer

Rear wheels lock up after parking for a period of time.

The brake calipers are not releasing correctly, is caused by pressure problems, i.e. caliper leaking, or line pinched. This can also be caused by a malfunction of the parking brake cable, i.e. a kink in the line, or physically frozen parts, etc. Service the rear brakes.

Jan 05, 2010 | 2003 Chrysler Voyager

1 Answer

I am trying to remove the rear brake caliper on chrysler voyager but struggling. How do I do this

Not sure of the brake, after removing all bolts and or retaining clips you can slowly pry the old pads apart using tire iron or large screw driver. this will compress the brake cylinder and allow for easy replacement of new pads. With this method you should not have to bleed the brakes after replacing pads.

Oct 22, 2009 | 2004 Chrysler Voyager

1 Answer

How to replace rear brakes on a 2006 chrysler minivan

take the wheels off the front,,remove the 2 bolts holding the brakes caliper to the caliper mount and pull off the caliper,then remove the old pads by popping them out, and the remove the 2 bolts holding the caliper mounting bracket to the hub and then remove the rotor,,,to either resurface it,,or replace it with a new one,,,the put the rotor back on(new one) install the mounting bracket and pads and press the caliper piston in with a pliers and then put it back onto the mounting bracket and then tighten all bolts,and do the other side,,pump up brakes and youre good to go

Oct 08, 2009 | 2006 Chrysler Town & Country

1 Answer

Chrysler Voyager 2001 rear brake system

Your brake caliper could have had froze up.

Aug 08, 2008 | 2001 Chrysler Voyager

Not finding what you are looking for?
2001 Chrysler Voyager Logo

977 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides