Question about 2000 Nissan Pathfinder

1 Answer

How do i change my power sterling wheel fluid ?

Posted by on

1 Answer

I don't know your exact vehicle,but removing the injector fuse and return power steering hose, at the resevoir,and putting it into a one gallon bottle, with a larger plastic hose coming out of the bottle under the vehicle, then crank the engine off and on ,with the key,will pump out the old fluid. Keep adding the correct new fluid, as you flush out the old.

Posted on Sep 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 chevy 2500.the sterling is hard to steer and the fluid is come out the cap.any idle what's going on.


Fluid Coming Out Power Steering Pump Cap - Taurus Car Club of ...

www.taurusclub.com > ... > Maintenance and Repair
Jan 9, 2010 - 2003 Vulcan has leak through cap on power steering pump. ... Hi I'm having the same thing happening to my 98 duratech. I was just getting ready to replace the rack today because of fluid coming out the drivers side boot... so decided to ... to be removed and that the bolt is recessed and difficult to reach.

Power steering issue - DodgeTalk : Dodge Car Forums, Dodge Truck ...

www.dodgetalk.com > ... > 2G Dodge RAM - General Talk
Jan 25, 2009 - Power steering issue 2G Dodge RAM - General Talk. ... Location:Sterling Heights, MI ..... pump, top off the reservior, screw on the cap, drop the truck and go drive it. .... I was able to loosen the pump and just dumped out the old fluid and.... I figured the belt was still good but the noise was definitely coming ...

Chevy Silverado Chrome Accessories - AutoAnything

www.autoanything.com/.../Chevy/.../110A50167A0A0A115A2690A1.as...
The Heartbeat has far better tastes when it comes to Chevy Silverado chrome accessories, and ... Check out our tail light chrome for Silverado rigs and you'll see what we mean. ... Chevy Silverado 2500HD Chrome Accessories .... 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998 ...

chevy bed rail caps - AutoAnything


Feb 03, 2016 | Sterling Cars & Trucks

1 Answer

How to Change sterling wheels


A steering wheel puller would help.

Aug 31, 2014 | Cars & Trucks

1 Answer

I changed my front pads and rooters on my 2002 suburban and now the power steering is out?


Phil: you probably got air into the power steering fluid assist piston. Try driving your car. The air should bubble up, keep adding the correct power steering fluid.

Mar 30, 2014 | Chevrolet Suburban Cars & Trucks

2 Answers

Power steering filter


Is it full of power steering fluid ? How are the hose's high pressure and low pressure ? Did you bleed the air out after changing the pump ? There is no filter .
Verify power steering fluid level per operating specification. Refer to Checking and Adding Power Steering Fluid.
Start the engine. Rotate steering wheel from left to right. Check for sign of cavitation or fluid aeration (pump noise/whining).
Verify the fluid level. Repeat the bleed procedure, if necessary.

Apr 23, 2017 | Pontiac Grand Prix Cars & Trucks

1 Answer

Is it true that the auto transmission fluid for chrysler grand voyagercan only be a particular type? Likewise for brake fluid and power sterling fluid??


The Filter inside the trans will only fit similar units

If your adding an external filter on return line then
a trans & power steering filter is the same inside

5/16" for trans -- usually
3/8" for P/S

Get the Filtran Filter with the magnet & only
use on trans or P/S return lines & change every
2 years

Oct 19, 2012 | 2000 Chrysler Grand Voyager

1 Answer

Is it very difficult to change the power steering pump in a 2004 kia sedona?


  1. Remove the Power Steering belt.
  2. Disconnect the power steering hoses from the power steering pump. Take caution as there may be some pressure.
  3. Remove the bolts holding the Power Steering pump to the pump mount.
  4. Install the new Power Steering pump.
  5. Reconnect the power steering hoses.
  6. Reconnect the Power Steering belt.
  7. Top off with fluid.
  8. Start up the vehicle.
  9. Turn the wheel to the left.
  10. Top off with fluid.
  11. Turn the wheel all the way to the right.
  12. Top off with fluid.
  13. Repeat the last 4 steps until the fluid level doesn't change much, and is topped off.

Feb 18, 2011 | 2006 Kia Sedona

1 Answer

How to bleed power steering system to a 1997 chrysler sebring


Very simple!!! I posted this under how to bleed the steering system in the "Tips" section....you can do this yourself and is very easy.

Sebring Coupe And Avenger
  1. Check the power steering fluid level, and add if necessary.

Use only MOPAR ATF PLUS automatic transmission fluid type 7176, DEXRON II automatic transmission fluid, or equivalent, in the power steering system.

  1. Raise and safely support the vehicle to lift the front wheels off the ground.
  2. Manually turn the pump pulley a few times.
  3. Turn the steering wheel all the way to the left and to the right 5 or 6 times.

If bleeding is attempted with the engine running, air will be absorbed in the fluid. Bleed only while cranking the engine.

  1. Disconnect the ignition high tension cable and, while operating the starter motor intermittently, turn the steering wheel all the way to the left and right 5-6 times for 15-20 seconds. During the bleeding procedure, make sure the fluid in the reservoir never falls below the lower position of the filter.
  2. Connect the ignition high tension cable, then start the engine and allow it to idle.
  3. Turn the steering wheel left and right until there are no air bubbles in the reservoir. Confirm that the fluid is not milky and that the level is up to the specified position on the dipstick. Also confirm that there is very little change in the fluid level when the steering wheel is turned. If the fluid level changes more than 0.2 inches (about a 1/4 inch), the air has not been completely bled. Repeat the process.

    // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 26; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos'; c17hydro_19.gif

      Check whether or not the fluid level changes between when the engine is running and when it is stopped

    Nov 13, 2010 | 1997 Chrysler Sebring

    Not finding what you are looking for?
    2000 Nissan Pathfinder Logo

    82 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    713 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...