Question about 1996 Jeep Grand Cherokee

1 Answer

Why would my 1996 jeep grand cherokee laredo strat and run for 5 to 10 mins the stall and die out

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 5,763 Answers

This can be caused by many things, the most common is the crank sensor. have the computer scanned for any stored codes, if there are codes they will help you in finding problem also hook fuel preasure gauge to it and see if it looses preasure when it dies it could be a bad fuelpump. i would start with these tests first.hope this helps.

Posted on Sep 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 jeep grand Cherokee Laredo. it began to stall at idle and now will not start


Check audibly the fuel pump. It will run for 3 seconds when ignition is turned on, but engine not started. If it makes noise, you could check for pressue at the fuel rail. There is normally a schrader valve you can press. Tske care, fuel under pressure will come out when pump is ok.
if ok, check for eventual fault codes with scanner.
could be crank sensor.

Nov 02, 2013 | 1996 Jeep Grand Cherokee

1 Answer

I have a 1996 jeep grand Cherokee Laredo. It started stalling at idle and now it will not start.


sounds like a fuel supply problem-change the fuel filter and run some injector cleaner through it-it also could be a bad fuel pump-Denny

Nov 02, 2013 | 1996 Jeep Grand Cherokee

1 Answer

Had my 1996 Jeep Grand Cherokee Laredo smogged registered as a gross polluter put new oxygen sensors and cataylic converter now car runs bad and stalls what could be the problem


to reset cars cpu take both + & - battery leads off & hook them together for at least 30mins, this should reset the cpu, after this is done add a product called cataclean to your fuel & Run it at med to high revs, best to drive it with anger, - this was the problem with mine in exactly the same situation as yours & it worked a treat for me

Aug 31, 2012 | 1996 Jeep Grand Cherokee

1 Answer

'99 Jeep Cherokee. Dies within 10 min of driving


Have you scanned the system for fualt codes? An O2 sensor will never cause the engine to stall out like this, NEVER.

May 10, 2012 | 1999 Jeep Grand Cherokee

1 Answer

1996 Jeep Grand Cherokee Laredo won't fire. Was


check the cam sensor and crank sensor, also is the distributor turning,possible distributor gear pin broke

Nov 08, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Abrupt stall


Take air intake duct off at throttle body and spray WD-40 into throttle body with plate open, then try to start, if it fires up for a second, then dies, it's a fuel delivery problem.

Jul 10, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Engine stalls at highway speeds 4.0 jeep grand cherokee laredo 2001


may be intermitently losing crank signal take to shop and have it scan on road test this will give you better idea

Jun 03, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Wont take a jump 1996 6cyl jeep grand cherokee laredo


the alternater may need exciting try reving it pretty hard to excite it

Jan 05, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Will start but will not stay running


i had the same problem. i replaced sensor after sensor and it kept stalling. i finally replaced the crankshaft position sensor and it's been running strong since. i have a 1996 jeep grand cherokee laredo so i hope that this will help!!

Aug 07, 2008 | Jeep Grand Cherokee Cars & Trucks

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...