Question about 1999 Kia Sportage

1 Answer

The heater blower motorkeeps goin out - 1999 Kia Sportage

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 752 Answers

Hi vith92633, I'm glad to help!

Normally blower motors do not go out after replacing them. The problem usually is wiring or connector issues. Try wiggling the wiring connector at the blower motor, if it comes on and goes off while wiggling it then replace the connector and wiring. If it does nothing when you wiggle the connector, then go to the "Blower Resister" and wiggle the connector the same way. If the motor kicks in and out then replace the "Resister and Wiring with the Connector". If neither of those are the problem then you could possibly need a A/C Control Head. Hope this helps and have an awesome day vith92633.

Posted on Aug 26, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok i have a 2004 chevy monte carlo i have a weird problem i know its a pain to get it on how about off i have keys out fuse out and my ac/heater is still goin i cant turn it off tell i disconnect the fan...


I DONT THERE IS ANYTHING WRONG WITH YO FAN NOR FUSE BUT THE SWITCH, AC FAN SPEED CONTROL UNIT AND MAY B THE HARNESS TOWARDS THE AC BLOWER FAN.


NGOSA L. K.

Mar 02, 2014 | Cars & Trucks

2 Answers

Cannot get the heater to work


CHECK SEE IF HEATER BLOWER MOTOR WORKING, REMOVE HEATER BLOWER MOTOR HOT WIRE HEATER BLOWER MOTOR SEE IF BLOWER MOTOR WORKING BLOWER MOTOR FAULTY OR YOU HAVE FAULTY WIRING AT BLOWER MOTOR AND RESISTOR.

Nov 05, 2011 | 1996 Mercury Grand Marquis

1 Answer

How to replace a blower motor in a 1996 ford thunderbird lx


Removal
  1. Remove the glove compartment liner to gain access to the heater blower motor and blower motor wheel assembly mounting screws.
  1. Use a small screwdriver to remove clip retaining hydraulic damper strut.
  1. Remove four screws and remove the heater blower motor assembly and blower motor wheel assembly from the heater blower motor housing.
Installation
  1. Using a new seal, position the heater blower motor and blower motor wheel assembly to the heater blower motor housing with the flat side of the flange near the heater blower motor switch resistor (18591). Install the four retaining screws.
  1. Tape the heater blower motor power lead to the air inlet duct to keep the wire away from the blower outlet during installation.
  1. Install the heater blower motor and blower motor wheel assembly in the vehicle.
  1. Install the glove compartment liner.

Oct 07, 2010 | 1996 Ford Thunderbird LX

1 Answer

1989 Suburban A/C blower problem


check the switch to be sure there is power goin to it and out of it. there is a high speed fan relay that usually controls all speeds. it will be under dash on right side probably on ac/heater box when u find it inspect wiring and connector

Jul 22, 2009 | 1989 Chevrolet Suburban

2 Answers

2006 Hummer H3 a/c & heater fan/blower failed


Probably too late now, I am sure you have already fixed it, but mine did this and it was an electrical part that is mounted right beside the blower fan. The part was OK, but the plug into the part was arcing and burned out the connection. A Chevy mechanic told me this has been happening to MANY Chevy products. I had to buy a new part and plug assembly with new wires, about 100 dollars, and I spliced them together. It was an Easy fix, but I shouldn't have had to do it :(

Jul 13, 2009 | 2006 Hummer H3

1 Answer

I have a 2000 ford E350 van with front and rear air. the front blower motor runs at low speed, The front blower still runs on low even when the knob is set on medium or high. I do not know where the...


it's either the blower motor switch or blower motor resister. Resistor ?Heater Blower Motor Switch Removal Remove the battery (10655) ; refer to Section 414-01 . Remove the battery tray. Remove the screws. Remove the battery tray. Disconnect the heater blower motor switch resistor connector. Remove the heater blower motor switch resistor (18591). Remove the two screws. Remove the heater blower motor switch resistor. ----------------------------------- Switches Removal Disconnect the battery ground cable. Remove the center trim panel; refer to Section 501-12 . Remove the control assembly. Remove the screws. Remove the control assembly. Remove the A/C-heater function selector switch knob. Disconnect the vacuum harness connector. Disconnect the A/C-heater function selector switch connector. Remove the A/C-heater function selector switch. Remove the screw. Remove the A/C-heater function selector switch. Remove the temperature control switch knob. Disconnect the temperature control switch connector. Remove the temperature control switch. Remove the screw. Remove the temperature control switch. Remove the heater blower motor switch knob. Disconnect the heater blower motor switch connector. Remove the heater blower motor switch (18578). Remove the screw. Remove the heater blower motor switch. ----------------------------

Mar 31, 2009 | 2007 Ford E-350 Super Duty Length XLT

1 Answer

1996 chevy s10 heater not blowing hot air


heater core or leak on cooling system

Jan 06, 2009 | 1996 Chevrolet S-10 Pickup

2 Answers

The heater blower on my 2003 GMC sierra wont shut off


i had the same problem. depends what kind of trim model you have. but if you look on the passenger side floor right under the glove box is where your heater unit is. if you take off the cover to it. their will be a little squarebox looking thing with 2 - 3 wires coming out of it and goin to the blower motor unit . Tap the square box with a screwdriver while your blower motor is on off mode. it should shut off if you give it a couple good solid taps. dont be afraid to hit it. that little square thing might have to be replaced if it turns off when you hit it. or just may have to be cleaned.

Dec 22, 2008 | 2003 GMC Sierra 1500

1 Answer

No heat,ch.thermostat,water is circulating,blower goin strong .


Check the 'heater control valve'. This valve opens when u turn on the heat switch on the dash, so the hot coolant will flow thru the heater core and provide heat. So although the coolant is circulating in the engine, the valve controlling the flow to the heater core is stuck closed, or not working.

Nov 15, 2008 | 2000 Ford Focus

Not finding what you are looking for?
1999 Kia Sportage Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...