Question about Plymouth Voyager

1 Answer

I have a 1992 plymouth voyger that i am changing the air condition compressor,expansion valve and dryer. I will be converting to 134 A.After flushing the evaporator and condensor and lines,how much ester oil do i put in the compressor and the rest of the system.

Posted by on

  • loustoy235 Sep 14, 2010

    yes thank you



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Plymouth Master
  • 80,378 Answers

A dry system (all oil flushed out) with a new compressor and dryer holds 135cc's (4.5 ounces) of PAG oil, if there is still oil in the condenser and evaporator cores then subtract 1 ounce

Posted on Sep 14, 2010

  • yadayada
    yadayada Sep 14, 2010

    You only add oil to the new compressor for this repair.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

1986 Pontiac Fiero. What has to be done to be able to use R-134 refrigerant?

There are simple conversion kits that basically just replace the service ports to use the r-134 type hoses, but it is best to have a pro evacuate system and flush it, draw a vacuum, add correct oil and freon. If the system has been empty or dead a while, best to replace dryer and orifice tube or expansion valve as well.

Jul 27, 2015 | Cars & Trucks

1 Answer

2008. Why isn't the air conditioning working better?

When the compressor is replaced it should have had at least 2oz of oil inserted into it. The entire system should have been flushed to remove any foreign debris ( especially if the original compressor/clutch failed ). The system then needs to be vacuumed down to remove any moisture for a minimum of ten minutes and then leak tested to ensure vacuum holds. The system is then filled with the proper charge of freon and oil and then monitored for guage pressures and signs of leaks to ensure proper operation and effective cooling

Jul 16, 2015 | Toyota Camry Cars & Trucks

2 Answers

1985 S-10 Blazer, 4cyl. Converting AC from R-12 to R-134. Need help to locate the High Pressure valve and the Low Pressure valve. I see one valve on the upper side of the accumulator and I see another...

because R134A runs at pressures far exceeding the reliability of the compressor and other components , it is not a simple case of just changing the gas
BY fitting a new system which includes evaporator , condenser , compressor and hoses , the fittings to which you refer will be evident
ac systems are not a job for DIY if you want a good reliable safe system

Dec 06, 2017 | 1985 Chevrolet S-10 Blazer

2 Answers

I am looking to convert the AC over to 134a. I have heard that the oil, the dryer and the expansive valve need to be replaced and then the system vacuumed out. where are the expansion valve and the dryer...

Look for the expansion valve where two of the AC lines connect together, usually near the radiator and the lines may be slightly different diameters, the larger one contains the valve. It is also VERY important to flush ALL of the old oil out of the system. Do this with an AC flush kit and all parts removed. Concentrate on the condensor and the evaporator after the hoses are flushed. Coat all 'o"rings and seals with AC oil when reassembling and be careful, leaks can happen and will be costly. Install 1/3 of system oil capacity in compressor and TURN the compressor by HAND after hoses are installed to it. OIL DOES NOT COMPRESS!! You may want to have a shop evacuate the system when ready.

Sep 01, 2011 | 1991 Nissan Stanza

2 Answers

1996 chev suburban air condition flow diagram

Give some more details of the problem.

Jul 14, 2011 | 1996 Chevrolet Suburban

1 Answer

I have a 1987 Plymouth reliant with an older a/c compressor. I've had the system evacuated and it holds pressure. I've also had it converted to 134 as well. When I add freon to the system, it registers...

first the low side should read 30 and the high should read 230 PSI or up to 275% f. DEPENDING ON THE AIR TEMP. did you change oil for the R134a? if not you will have to empty the dryer and compressor and replace the oil and you will now have to replace the reciever dryer and the capularriy tube to fix. if you need more help post here. You will need to re evacuate afterwords. the oil for r12 gels with r134a.

Aug 13, 2009 | 1987 Plymouth Reliant

1 Answer

AC compressor blows fuses when it goes to kick on.

As a mechanic I NEVER put that JUNK in ANY system, they clog up A/C compressor's and every thing elese. (You might have to replace most of the components in your vehicle now. ie condenser, evaporator, compressor, receiver/dryer (accumulator), orifice tube (thermo expansion valve) and you may be able to flush out the lines.

Apr 27, 2009 | 1994 Cadillac DeVille

2 Answers

1992 f150 ac

Did you replace the 'expansion valve'. If the expansion valve is full of **** no coolant will get through to cool.

Aug 08, 2008 | 1992 Ford F150 SuperCab

1 Answer

Air Condition

The low-pressure side recharge valve was changed with the conversion to 134 so it is nearly impossible to use the wrong stuff.

I found this discussion that indicates your car requires R-12 if it has not been converted:

Jul 06, 2008 | 1992 Toyota Camry V6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides