Question about 1994 Chevrolet Corvette

1 Answer

1994 Corvette Cassette/Radio?Replace cassette "drive belt"??

Rather that buy another cassette/radio, I would like to replace the broken "DRIVE BELT" myself. The unit is out of the dash—I just need to know where I can locate replacement belts for this unit— I've searched everywhere on-line. Also, I would need info or a diagram of the correct way to "route the belt. THANKYOU KINDLY.

Posted by on

  • Donne Trav May 16, 2008

    Rather that buy another cassette/radio, I would like to replace the broken "DRIVE BELT" myself. The unit is out of the dash—I just need to know where I can locate replacement belts for this unit— I've searched everywhere on-line. Also, I would need info or a diagram of the correct way to "route the belt. THANKYOU KINDLY.


  • Donne Trav May 16, 2008

    Hello again. The model # for the above unit is: Delco 16172701.


    I've attached a pix showing the way I have routed a rubberband.
    Would you please let me know if this correct?
    Again, I Thankyou.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 143 Answers

Donne Trav, you can take that belt to an electronics shop (your neighborhood shop is best). They will most likely have replacement belts. They will also have a tool that measures the belt so you know which size to get. I used to fix T.V.'s and VCR's. Its the best method when you cannot source an original belt. As far as the diagram, I would need a model # of the radio to even start a search for such a thing.

Posted on May 16, 2008

  • Eric Smale
    Eric Smale May 20, 2008

    Donne Trav, that looks extremely correct! I can see no other way it should be routed. Take care, Eric.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WIRING FOR 16164325 DELCO RADIO


That is not a radio. That is a control head. The 7 wires carry data to the radio brain which on this trucks is a silver box located directly above the gas pedal. These trucks also had an optional cassette player/ cassette and eq unit that was mounted in the center of the dash that also connected to the radio brain as well.

Jul 17, 2016 | 1993 GMC Sierra K1500

1 Answer

How do I clear code E10 off my radio


Rance, possibly errer code will go away if your battery was unhooked for ten minutes and reconnect.
E10 : Tight tape error
Cause: A restricted casset tape transport or broken cassette drive belt
Substitute a different tape. If there still is an error code, service the unit at an dealer/ Service Center.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Thread How to reset radio code in 2002 Buick Century and will GM charge to...
CD Player gives E20 error code when CD is inserted GM Forum Buick Cadillac...

Jan 29, 2016 | 2000 Buick LeSabre

1 Answer

What is the e10 error code on the stereo


E10 : Tight tape error
Cause: A restricted cassette tape transport or broken cassette drive belt
Correction: Substitute a different cassette tape. If there still is an error code, service the unit at an ACDelco Service Center.


If you cannot get the cassette player fixed I would recommend replacing the radio instead of going to a service center as it would be cheaper.

Jun 04, 2014 | 1998 Oldsmobile Cutlass

1 Answer

Remove radio cassette from dash of l996 passat?


Purchase a mid-1990s Chilton or Haynes service manual for your VW. Common tasks such as radio replacement covered. Transmission rebuild, not covered.
Unofficial versions of a Bentley manual 1995-1997 could be found, a little birdy told me.

May 27, 2014 | Ford Ranger Cars & Trucks

1 Answer

I have a 2000 Camry and my cassette player keeps switching from side to side. What can I do?


You may have broken a little drive belt in the deck. Pull it and have a tecki look at it.

Feb 17, 2013 | Toyota Camry Cars & Trucks

1 Answer

Need wiring diagram for factory chrysler new yorker radio


2 things
1 sounds like the amp is fryed

2 sounds like the belt on the casett deck is broken
salvage yards sell radios cheep like 20 -30 bucks usualy if you remove it your self

May 28, 2009 | 1991 Chrysler New Yorker

1 Answer

Plastic box of wires to big for my new cd player after taking my old cassette player out


You wll need a stereo installation adapter kit. This will change the dash opening to the size you need, oftentimes by replacing an entire dash panel for a factory look.

http://www.bestbuy.com/site/olspage.jsp?skuId=8520442&type=product&id=1218019640369

Here is a link to the dash kit for your car at Best Buy. These will come with detailed instructions. Let me know if this helps :)

May 22, 2009 | 2000 Ford Focus

1 Answer

In dash radio/cassette player


Its easy but cover the wood etc with a reasonably thick bit of cloth!!!!!!!!!

First remove ashtray and just pull out the unit will need a bit of force but will clip out. This will reveal three screws come bolt heads 8mm I think. take them out

Second get hold of the air vents at the top and again pull them out they will come but use fingers not a tool.
Behind this are 2 screws as above , take them out and the radio/heating unit comes out, this can then be seperated from its two brackets either side by removing more screws.

You will have to disconect various wiring plugs but no problem, they all come off and are colour coded.

Easy peasy put it back together the opposite way. Good luck.

Aug 23, 2008 | 1999 Lexus Gs 300

Not finding what you are looking for?
1994 Chevrolet Corvette Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...