Question about 1997 Dodge Dakota

1 Answer

1997dakotafaultcode1763 only when brakes appliedtrans starts in drive

Posted by on

  • robtre Sep 21, 2008

    Code 1762. Changed Trans oil & Filter. Code changed to 1763. I did adjust low/reverse as stated in repair manual. Trans will not shift down to low. every thing else works great. I can pull it down to first and its good. Then I shift to D. This is getting old TANKS!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 241 Answers

Your governor pressure sensor voltage is too high
need email address to send some images with procedures on how to test it

Posted on May 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i first crank the car it idles at like three or so then goes to zero and cuts of it does this a few times especially if i push the brake, i have learned to rev engine lightly and press brake and put...


Might be a leak on your brake booster (this will most probable give you a hard brake pedal or a "sucking sound " when applying brakes) also check the vacumm pipe from the engine to the brake booster. It might have a leak, so when you press the brakes it influences the air mixture.

Dec 14, 2012 | 2000 Nissan Maxima

1 Answer

Ford transit 190, ok when starting but drive for


if it has rubber flexi brake hoses on the back there is a good chance the hose/s are collapsing inside which mean its pushing fliud through when braking but not releasing it

Mar 02, 2010 | 1999 Ford F150 Regular Cab

1 Answer

T brakes after driving on a donut pare


I believe driving on the donut spare has nothing to do with the problem-it isn't all wheel drive option is it? You say you added brake fluid, how low was the level? If it is losing fluid, you might have a rusted brake line that is leaking. Any evidence of a leak under the van? It's possible the master brake cylinder is bad, but this seems to be a sudden start of the problem. Did the tire blow out or did you go out to find it flat in the morning? I believe this is a leaking brake line issue. It is possible that if the tire blew out while driving, or you hit something (like debris) in the road, it may have damaged a brake line. As I mentioned earlier, it could just be a rusted leaking brake line. If brake fluid leaked on the exhaust or any hot components, it would give off a 'chemical' smell ( or even have an odor if it just leaked out) Let me know what you find.

Nov 30, 2009 | 1995 Dodge Caravan

2 Answers

Brakes squeal on startup of 2002 Suzuki Grand Vitara


if u are not moving in drive "D" the brake rotor is not moving/turning, brakes are just on.
what u might be hearing is the serpentine drive belt squealing at start up. replace this belt asap.

Oct 02, 2009 | 2002 Suzuki Grand Vitara

1 Answer

04 Corolla "BRAKE" light on dash--comes on occasionally??


I wouldn't drive it... when your brake light comes on, it means there's a serious fault with your brakes. They may not engage when you brake and there won't be any further warning other than the brake light

Sep 09, 2009 | 2004 Toyota Corolla

2 Answers

I HAVE A 1998 CADILLAC CATERA V6 AUTOMATIC ENGINE DIES IN DRIVE


Yes, most likely a fault in the auto transmission, and the car has shut itself off to prevent further damage.

Aug 03, 2009 | 1997 Cadillac DeVille

1 Answer

Passat stuck in park, brake switch seems to be working.


thier is normanly a brake light switch and a brake pedal switch are they both working

Apr 11, 2009 | 2003 Volkswagen Passat

2 Answers

1995 Buick Park Ave. Brake light remains ON and chimes on driving


The problem is the car think the park brake is on (intermittently). I would check the park brake switch, perhaps it's loose, or perhaps the park brake is pushed down to the first "click" spot. Also check the wiring connection to the switch, and the wiring nearby. Good luck!

Dec 13, 2008 | 1995 Buick Park Avenue

1 Answer

1996 cutless supreme 3.1 brakes come on automaticly


you have got to adjust the brake light switch so it isn't pushing on the brake peddle see right now it is holding the brake down

Nov 13, 2008 | 1996 Oldsmobile Cutlass Supreme Coupe

Not finding what you are looking for?
1997 Dodge Dakota Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...