Question about 2006 Ford Freestar

1 Answer

I have a 2005 Ford Freestar SE Minivan and cannot get high beam headlights to work. Have replaced bulbs, fuses are intact. When I switch to highbeams, the headlights go out completely. Low beams work fine until I switch to highbeam. Any thoughts?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

AT FUSE TERMINAL #45 TO THE RIGHT OF THE HIGH BEAM RELAY AS YOU ARE LOOKING INTO THE ENGINE COMPARTMENT FROM THE FRONT OF THE VEHICLE. THERE IS A 15 AMP FUSE, PULL IT AND SEE IF IT IS BAD. IF IT IS REPLACE IT. THIS IS THE FUSE FOR THE HIGH BEAM RELAY.

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have no high beam headlight low works fine have already replace mili switch 2000 ford exployer


Have you checked the fuses and the bulbs to make sure they are ok and check that you have a live feed when switched to main beam .

Feb 02, 2015 | 2000 Ford Explorer

1 Answer

No headlights working


Just low beams headlamp switch, bulbs, dimmer switch, low beam relay, fuses
just hi beams : dimmer switch, high beam relay, bulbs , fuse
Both Headlamp switch , dimmer switch, fuse, bulbs.

Nov 07, 2013 | 2001 Ford Taurus

1 Answer

High beam headlights stuck on replaced switch same problem


It can be issue with headlight switch,but as its already been replaced.Try disconnecting high beam headlight wiring from headlight assembly and reconnect direct external wire from headlight switch to headlight assembly,then by switch see if headlight is getting off and turning on or not.
See below related help links,similar to your issue.Click the link below:----
Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

----------------
Only high beams working on GMC Savana?---------- High beams stopped working but headlights still work? http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html
---------- Working of Headlight switch? ----------

Both headlight bulbs blow together?
----------

Car headlight bulbs don't last long?

------------ Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------
these will help.
Thanks.

Nov 06, 2012 | 2007 Chevrolet Tahoe

2 Answers

Camry headlights not working


it sounds like a bad light switch

Mar 25, 2010 | 1993 Toyota Camry V6

1 Answer

First the high beam on passenger side stopped working the the light altogether now the high beam on the drivers side is not working?


FIRST CHECK THE HEADLIGHT BULBS TO SEE IF THE HIGH BEAM FILLAMENTS ARE BURNT OUT IF THEY ARE THEN REPLACE THE BULBS. THIS SEEMS MOST LIKELY SINCE ONE STOPPED WORKING AND THEN THE OTHER. THE OTHER LESS LIKEY CAUSE IS TO CHECK THE HIGH BEAM RELAY FUSE #45 TO THE RIGHT OF THE HIGH BEAM RELAY AND SEE IF IT IS GOOD. IT IS A 15 AMP FUSE.

Feb 14, 2010 | 2005 Ford Freestar

1 Answer

Headlight adjustment


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Dec 27, 2008 | 2005 Ford Freestar

1 Answer

2006 ford freestar high beams


there should be seperate fuses for the high beams in the under hood fuse box try checking them

Nov 05, 2008 | 2006 Ford Freestar

2 Answers

Headlights not working


Lihgting switch must also be checked
8673aab.gif

Jun 08, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2006 Ford Freestar Logo

623 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...