Question about 1999 Chevrolet Blazer

1 Answer

1999 chevrolet blazer

In the mornings when the truck its cold, the transmission does not connect to first gear or reverse until a few minutes when the vehicle its hot. afterwards it works fine.

Posted by on

  • chillywillie May 16, 2008

    thanks for the advise, i'm gonna check the transmission temperature sensor. i think that's gonna solve the problem.

  • Anonymous Mar 31, 2014

    HVAC blowing hot

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 241 Answers

Check the fluid levels on the transmission " while running at idle " on park position.
if level is ok, thren you may have a transmission temperature sensor faulty

Posted on May 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My chevrolet transport is no longer engaging gears, when i put it on drive or reverse gear, it doesnt engage


check fluid level in transmission . run the fault codes and look for a faulty TCM or torque converter clutch solenoid / servo

Mar 20, 2014 | 1999 Chevrolet Venture

1 Answer

When I shift out of park it takes a few seconds for the gear to change


low level of transmission fluid or transmission is on it's way out

May 21, 2012 | 1997 Chevrolet Blazer

1 Answer

Why won't my 1999 Chevrolet Blazer shift into reverse?


my blazer wont shift into reverse or out of first gear

Mar 31, 2011 | 1999 Chevrolet Blazer

1 Answer

1997 chevy blazer awd - no reverse and slipping in forward - oil good no leaks - whats this?


It sounds like the sun shell inside the transmission that is faulty, and that is due to a manufacturing process..
Unfortunately, this problem requires a rebuild or replacement of the transmission. The same thing happened to me about a month ago with my 97 Blazer. It cost me $1200.00 for a local transmission shop to rebuild mine.
"
The "sun shell" connects the reverse input drum to the sun gear. The 2/4 band wraps around the reverse drum. When the reverse clutches are applied the sun shell spins the sun gear. When the 2/4 band is applied the sun shell holds the sun gear from spinning. This is why when it breaks you lose reverse, second and fourth"

Oct 09, 2010 | 1997 Chevrolet Blazer

1 Answer

My 2001 Blazer will go forward but doesnt go in reverse. Is there a reverse switch on or near the transmission?


Does the gear selector show that is in reverse? Does the transmission have gear selector solenoids on the transmission? If so, may be a bad reverse select solenoid. Do the 'backup' lights come on when reverse is selected?

Aug 03, 2009 | 2001 Chevrolet Blazer

1 Answer

Reverse is gone on 1995 chevy blazer s10-goes forward just fine


reverse clutch went out rebuild transmission

Feb 21, 2009 | 1999 GMC Jimmy

1 Answer

Have a hard get the gear shift to go into reverse


if it will not shift out of park when the brake is pushed then in will be the shift interlock, but if it is still hard to move after out of park then it will be a shift cable

Jan 16, 2009 | 1998 Chevrolet Blazer

1 Answer

Automatic Tranmission forward gear works reverse doesn't


YOU HAVE A SHIFT SOLENOID THAT HAS EITHER FAILED OR IS STUCK, DO YOU HAVE ANY TRANS TROUBLE CODES?

Nov 02, 2008 | 1990 Chevrolet S-10 Blazer

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

Related Topics:

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...