Question about 1997 Dodge Intrepid
First, torque them all to 45 ft pounds(61 nm), second to 65 ft pounds (88nm) go over them a third time @65 ft pounds again. then 1/4 turn and you are done.
Posted on Sep 14, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 10, 2015 | Dodge Cars & Trucks
Sep 19, 2013 | 1996 Saturn SL
Fig.: Cylinder head torque sequence - 6 -cylinder engine
Cylinder head torquing should proceed in three steps and in the
prescribed order. Tighten them first to 50-55 ft. lbs. (65-71 Nm), then
give them a second tightening to 60-65 ft. lbs. (78-84 Nm). The final
step is to 70-75 ft. lbs. (91-97 Nm), at which they should remain
Six IN V - 6V
Fig.: Cylinder head bolt torque sequence - 6 -cylinder engine
Tighten the head, according to the illustrated sequence in three progressive steps. Tighten the bolts to 50-55 ft. lbs. (68-74 Nm), then 60-65 ft. lbs. (81-88 Nm) and finally to 75 ft. lbs. (102 Nm).
Hope this helps (remember to rate and commene this answer).
Jan 19, 2011 | 1985 Ford LTD
Fig. Cylinder head bolt torque sequence-3.8L engine
Fig. Tighten the cylinder head bolts using the following sequence-31L and 3.4L engines
Dec 16, 2010 | 2002 Pontiac Grand Prix
Aug 21, 2010 | 1995 Ford Escort
Aug 12, 2010 | 1991 Cadillac Eldorado
May 17, 2010 | 1997 Ford F150 Regular Cab
May 07, 2010 | 2000 Ford Focus
Apr 11, 2010 | 2002 Dodge Intrepid
Jan 23, 2010 | 1993 Dodge Ramcharger
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: