Question about 2007 Chevrolet Tahoe

Open Question

How to reset the tahoe computer - 2007 Chevrolet Tahoe

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I reset 2009 chevy tahoe computer in safe mode?

disconnect the neg on battery for 30 seconds then put back on batt and tighten up. Do not take off positive. GOOD LUCK..........

Mar 31, 2015 | 2009 Chevrolet Tahoe

1 Answer

Tahoe reset

What are you wanting to reset? What needs to be done is diagnosis of the stalling problem. This can be caused by many things. It could be the ignition system, the fuel system or even the vehicle security system malfunctioning. I would begin diagnosis by scanning your onboard computer network for possible fault codes and go from there.

Jan 01, 2012 | 1999 Chevrolet Tahoe

1 Answer

How to reset the computer on a tahoe when you

Very simple. 1 turn the key to "on" 2 press you accelerator pedal all the way down 3 times 3 press the pedal down 1 more time and hold for a total of 4 times and wait for the display to reset 4 turn the key off and turn back on to verify it has reset. That's it!

May 09, 2010 | 2001 Chevrolet Tahoe

1 Answer

Airbag light stay on 2003 chevy tahoe

The air bag light will remain illuminated if a fault has been detected in the air bag system.
The onboard computer will need to be interfaced with diagnostic equipment to read the fault.
This is also the only way to reset the light.
Good luck, I hope this helped.

Mar 13, 2010 | 2003 Chevrolet Tahoe

2 Answers

On my 2005 Tahoe how do I reset the check engine light?

the check engine light is indicating a problem with a control system. The resulting codes need to be fixed, then the light will be reset or go out by itself. If the problem resolves itself, or is intermittent, the light may go out by itself

Mar 05, 2010 | 2005 Chevrolet Tahoe

1 Answer

How to reset airbags in a 2007 tahoe

u have to replace all dammage components for the air bag system first including the air bag module
if u install the air bag it would not blow out like that
the system is in default that why the warning light is on
u would have to get the vehicle scan to see the reason why the light is on or to reset it ( by dealer )

Oct 27, 2009 | 2007 Chevrolet Tahoe

1 Answer

My 2007 Chevy Tahoe has the air bag light on all the time. I have checked the connections under the front seats and tried resetting it by taking the battery cables off. Nothing seems to work is there a...

You need a scan tool that reads the airbag computer. After that you need to reprogram (reset) it if there is no faults. Bring it to a Dealer as it may be under warranty

Aug 26, 2009 | 2007 Chevrolet Tahoe

1 Answer

Brake light stays on after replacing brake line and bleeding

You may need to do a code scan,this will reset the computer and reset any codes if the brake problem has been taken care of.Autozone Shucks/Kragen/O'Reilly's will do this for free.

May 31, 2009 | 1996 Chevrolet Tahoe

1 Answer

How do I reset my 2004 Chevy Tahoe check engine light

just go to a garage or dealer to have your light cleared with a computer

Apr 11, 2009 | 2004 Chevrolet Tahoe

Not finding what you are looking for?
2007 Chevrolet Tahoe Logo

Related Topics:

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides