Question about 1999 Jeep Wrangler

1 Answer

I have a 1999 Jeep TJ, the wipers, radio and turn signals all stopped working. Checked fuses, nothing seems blown. Also, they all work when the ignition switch is in the accessories position, but when you turn the switch to crank up the car, they all loose power. Help, please

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same thing with my 2004 Wrangler. The Airbag light stayed on also. Took to dealer - Cost $400 for them to replace the ignition. Fixed every thing.

Posted on Dec 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of 2003 Honda accord blower motor


Check to see if u have power & ground to the blower with the fan on.if so u need A blower mtr

Aug 13, 2017 | 2003 Honda Accord

1 Answer

The blinkers and wipers and radio dont work unless the key is turned backwards, if the jeep is running none of these work, this is a 1999 jeep wrangler tj


sounds like the accessory side of the ignition switch is not working. When the key is on run position the same wire that is hot coming out when the key is turned to accessory should be hot, along with the ignition wire that runs the engine. (hot meaning it has 12v)

Oct 21, 2009 | 1999 Jeep Wrangler

1 Answer

The gauge cluster stopped working my radio works but nothing else


remove cluster clean terminals with dielectric cleaner then coat pins with dielectric grease that shoul do it

Jun 23, 2009 | 1996 Jeep Cherokee Country

1 Answer

'87 Cherokee no horn, turn signals, brake lights, wipers, blower


Pull the fuses and check the socket for power on the things that don't work. If there is no power at the fuse box there is a good change the stater igintion switch is toast. it is located on top of the steering colunm under the dash.usally less then 20 bucks All that you mentioned get power from this switch that goes to the fuse panel when you turn the key on

Jun 14, 2009 | 1987 Jeep Cherokee

2 Answers

Signal and windshield wiper aren't working


switch in steerig console combo wiper turn?

Mar 01, 2009 | 1999 Volkswagen New Jetta

1 Answer

1998 TJ, airbag light comes on and radio, heater blower, turn


Make sure your replace the ignition switch the mounts on side of steering collum, not the key switch!!!!

Dec 20, 2008 | 1998 Jeep Wrangler

1 Answer

1998 Jeep Wrangler Electrical Short in Steering Column?


I had a similar problem with my 2000 Jeep TJ and I found the problem in the wiring harness under the hood.several wires were corroded and almost burnt off.If you remove the black tape which keeps the harness bundled together and if you see evidence of "green" type powder or "gook" it's most likely where the wires have faulted.

Dec 12, 2008 | 1988 Jeep Wrangler

Not finding what you are looking for?
1999 Jeep Wrangler Logo

750 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...