Question about 1999 Ford Expedition

1 Answer

99 ford expedition power window

Drivers door power window won't raise. I have door panel removed. Can I manually raise the window.

Posted by on

  • 4 more comments 
  • Anonymous Jan 15, 2009

    There is a double ground wire inside the drivers sided kick panel and the bolt is either loose or missing.

  • Anonymous Mar 17, 2014

    2007ford expedition

  • Anonymous Mar 22, 2014

    windows lowers fine, needs assistance to raise

  • Anonymous Mar 24, 2014

    I need to disconnect the window from the metal inner panel

  • Anonymous Mar 25, 2014


  • Anonymous Mar 30, 2014

    Drivers side window raises bur jams before fully lowered



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 241 Answers

No, you will have to remove the window motor to raise the window up manually.

Posted on May 15, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i take off the driver side door panel off a

take a screw driver and gently pry up the power window and door lock stuff. Disconnect the wiring from them. Pop off the trim piece next to the mirror and remove the screw I dont remember any other screws but check. There might be 1 more. Then just lift the door panel up and its off. Ford made getting door panels off super easy.

Oct 10, 2014 | 2002 Ford Expedition

2 Answers

Passenger side power window

Remove inner door panel...Push window up with hand until you can grasp the top edge...Bring to top and hold in place with packing tape...You will need to replace regulator/motor ...saailer

Aug 26, 2014 | 1997 Ford Expedition

1 Answer

How to raise a electric window manually on a 1999 ford expedition

Not to sure this can be done. Maybe if you took off the door panel,you could wedge something to hold it up. Most likely you need a new window lift motor.Some come with the regulator attached.

Oct 14, 2012 | 1998 Ford Expedition

1 Answer

Window cable broke so window does not go up and down

The window regulator cable on a Ford Expedition is part of the regulator assembly and is not serviceable separately. Therefore, if your Expedition's window regulator cable incurs damage, you'll need to replace the entire regulator. The cable moves the regulator up or down in response to the window motor. If the cable malfunctions, you won't have command of your Expedition's power window until you replace the regulator. If you have basic auto-repair skills and an hour of free time, you can replace your Expedition's window regulator. Pry the window switch bezel out of the Expedition's door panel using your trim tool. Disconnect the switch from the door harness by hand and set the switch/bezel assembly aside.

  • 2 Remove the hex head screws from the door panel using the Phillips screwdriver. Depending on the year of your Expedition, you may need to remove a trim cover from behind the inner door handle with the trim tool to expose that screw.
  • 3 Lift the door panel up and off the door by hand. If your Expedition has a courtesy light in the lower-trailing edge of the panel, disconnect that light from the door wiring harness before moving the panel away from the door.
  • 4 Push the Expedition's window to the top of the window frame by hand. Tape the glass to the top of the door with packing tape to prevent it from dropping back down.
  • 5 Remove the window regulator mounting bolts with the socket set. Unbolt the regulator from the window glass with the socket set. Pull the old regulator out of the Expedition's door by hand.
  • 6 Set the new window regulator into the Expedition's door by hand. Bolt it in place with the socket set.
  • 7 Reinstall the Expedition's door panel in reverse of how you removed it.
  • Oct 17, 2011 | 1997 Dodge Caravan

    1 Answer

    My windows will not come up & i dont have fuse box layout. What do i need to do?

    Autozone sells the complete drivers side door window switch with all four switches
    and window lock switch for $111.00, Just put a flathead screw drivers under the switch panel and raise up and replace the whole switch, also on mine in the manual the #14 fuse is for power windows. Hope this helps

    Oct 16, 2011 | 2000 Ford Expedition

    1 Answer

    I have a 2001 Ford Expedition XLT with no owners manual. The front drivers power window went down and will not go back up. The other 3 windows are fine. Can you please help me, is it a fuse issue or what...

    To buy an owners manual ----Helm.Com

    Owners manual or a factory shop manual
    won't help you

    You have a broken window regulator

    You will have to figure out how to remove the
    inner door panel

    Then get inside the door & replace whatever
    is broken

    Aug 02, 2011 | 2001 Ford Expedition

    1 Answer

    1997 ford expedition window won't go up... how do

    Remove sail panel cover for mirror, remove screw. Remove window switch cover and remove screw. Remove courtesy lamp lens on door and remove screw. Remove inside door handle trim cover and remove 8mm bolt and handle. Lift upwards and remove door panel.

    Oct 08, 2009 | 1997 Ford Expedition

    3 Answers

    Instructions on how to install window regulator on 99 Expedition

    Here is the procedure, the "dimples" are on the metal surface of the inside of the door. With the waterscreen off you can locate the motor to help you tell where the dimples are. Drill holes then use a socket to remove window motor bolts.

    Front Door Window Regulator Motor
    Removal and Installation

    Raise the front door window glass to the full up position.
    Remove the front door trim panel.
    Remove the door speaker.
    Position the watershield aside.
    CAUTION: Make sure the electrical connector is positioned aside before drilling.

    To access the power window motor bolts, use a 19 mm (3/4-in) hole saw with a 8 mm (1/4-in) pilot to drill three holes at the existing drill dimples on the door.

    Disconnect the front door window regulator electrical connector.

    Remove the bolts and the front door window regulator motor.

    To install, reverse the removal procedure.
    Cycle the window glass to make sure the gears engage

    Jun 22, 2009 | 1999 Ford Expedition

    1 Answer

    Actuator removal

    please rate as solved if this is what you need. You will need to borrow a heavy duty riveter from autozone or wherever you buy the lock cylinder from.

    1. NOTE: The rear door window glass must be completely raised.
      Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
    1. Remove the rear door trim panel. For additional information, refer to Section 501-05 .
    Trim Panel —Rear Door, Expedition Removal
    1. Remove the power window switchplate (14524).
    1. Disconnect the electrical connector.
    1. Remove the rear door handle trim cover.
    1. Remove the rear inside door handle.
      • Remove the door handle bolt.
    1. Remove the rear door trim panel screws at bottom of panel.
    1. s2j~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: To avoid damage to the rear door trim panel, do not pull directly outward.
      Lift upward and then outward to remove the rear door trim panel (27406).
    1. Remove the rear door watershield.
    1. Disconnect the power door lock actuator electrical connector.
    1. Drill out the power door lock actuator rivet.
    1. Remove and discard the screws.
    1. Remove the power door lock actuator.
      • Disconnect the power door lock actuator rod.
    1. NOTE: Use new screws when installing the rear door latch.
      To install, reverse the removal procedure.
      • Use Heavy Duty Riveter to install the new rivet.

    Jun 14, 2009 | 2002 Ford Expedition

    1 Answer

    Power windows and door locks sometime works.

    time to take it to a shop, you need a new power window motor regulator :(

    Jan 29, 2009 | 2000 Ford Expedition

    Not finding what you are looking for?
    1999 Ford Expedition Logo

    785 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts


    Level 3 Expert

    77939 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22306 Answers


    Level 3 Expert

    5651 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides