Question about 2001 Hyundai Accent
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hot or cold engine !!
cold engine :- the problem in (ECT) engine coolant temperature
sensor or lose fuel pressure ??
hot engine :- (CKP) crankshaft position sensor or (ECT) too
explain more details abut your car default
and replay us for more information
WITH MY BEST WISHES
Posted on Jul 08, 2008
Pop the hood and you should see two dials (hex shaped plastic screws) on each of the headlight assemblies. One is for your high beams and one is for your low beams. You'll need to measure from the ground up to the center of your bulb and make that marking on the wall for each of your bulbs (so four marks). Then park about 30 feet away from the wall (make sure you're on a level surface that's level with the wall base. If the light says VOR, then the top of the brightest area of the light should line up with the mark. if it says VOL, then the top of the brightest area of the light should line up two inches below the mark.
Posted on Aug 21, 2009
They nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 17, 2009
Testimonial: "The adjustment screw (for passenger side) is located between the battery & frame's second hole. Turning counter-clockwise, it adjusts downwards,Thanks"
Tips for a great answer:
Nov 07, 2014 | Hyundai Motor 2004 Accent
Jul 12, 2012 | 2001 Hyundai Accent
Nov 30, 2011 | 2001 Hyundai Accent
Aug 20, 2011 | 2002 Hyundai Accent
May 26, 2011 | 2001 Hyundai Accent
Headlight bulbs-2000-2005 Accent
Jan 23, 2011 | 2001 Hyundai Accent
Apr 01, 2010 | 2001 Hyundai Accent
Oct 14, 2009 | 2001 Hyundai Accent
Aug 23, 2009 | 1996 Hyundai Accent
Feb 18, 2009 | Hyundai Motor 1995 Accent
568 people viewed this question
Usually answered in minutes!