Question about 2003 GMC Yukon XL

Open Question

Abs and traction control light on in gmc yukon xl?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 94 Answers

SOURCE: 2005 gmc yukon xl denali service ride control

it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you

Posted on Mar 16, 2009

  • 386 Answers

SOURCE: My wifes truck, 2002 gmc yukon xl,abs light comes

it should come on at intial start up and immediately go off, its' in self check mode... if it is staying on longer than it should then have it scanned with a abs scan tool at you dealer or trusted independant repair shop, please rate my help, thanks...

Posted on Aug 05, 2009

  • 1071 Answers

SOURCE: bmw 530i 2001 abs and traction control light on

abs control module is bad

Posted on Aug 19, 2009

Testimonial: "thanks how much is an abs module cost and is it necessary to fix right away"

  • 1 Answer

SOURCE: 03 Yukon Denali Traction Control/ ABS Problems

my 2000 yukon has the traction control light on and the abs light on any anwsers?

Posted on Nov 28, 2009

  • 396 Answers

SOURCE: Engine light and ABS traction control light remain

The ABS sensor is a speed sensor also for Traction Control. This is why both lights are on , One of your front ABS sensors are bad or disconnected, or has a pinched wire.

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The traction control disabled aletr come on continuously and vehicle reduce speed is activated. why is my car doing this?

Have codes read by someone with a good scan tool which reads ABS codes. Probably a bad wheel speed sensor.

Oct 11, 2014 | 2003 GMC Yukon XL 1500 Denali

2 Answers

My 2003 GMC Yukon XL 1500 - ABS & Traction Control lights come on every time I drive over a bump in the road

id be looking at a wheelspeed sensor with a wire about to break off. or a bad connection possibly. plug and unplug them all at least twice to see if the issue goes to try.

Jul 03, 2017 | 2003 GMC Yukon XL

1 Answer

My traction control come on my 2003 yukon xl when driving what causes that to happen.

when ur driving and u take off fast from a stop sign or light or turn and one or more of the tires slip from wet road ,sand on road or ice on road anything that causes a tire to slip will set off the traction control ---if it is on steady or coming on and off while on a dry road check the abs sensor wiring first if looks good will need to have truck scanned will probably have a pending or a fault code in computer most auto stores will scan a vehicle for free check ur local area the code will assist in locating the problem so a repair can be made

Oct 23, 2011 | 2003 GMC Yukon XL

1 Answer

My t/c traction control warning light is on along with my brake light. i was told it's the t/c sensor.what do you think?

you will need to scan the abs codes when there is an abs problem it will also turn off traction control because it can not read the wheel speed

Feb 19, 2011 | 2004 GMC Yukon

1 Answer

I was driving my 2004 Yukon XL and the "Service

Wheel hub bearing . When the ABS see's a problem will disable traction control an ABS an will turn on RED brake light as well . Fluid level has nothing to do with it .
Refer to ABS Description and Operation in Antilock Brake Systems

Mar 17, 2017 | 2004 GMC Yukon

1 Answer

I have an 03 yukon slt awd. Traction control active comes on when i start to accelerate and I lose power. It also makes a rumbling noise then it returns to normal driving. It happens every time I...

Probably all related , all these systems are interrelated .One won't work without the other. Could have a problem with the TAC system - electronic throttle control . Your best bet , take it an have the computers checked for DTC'S - diagnostic trouble codes . Do you know anything about automotive electronic's ,serial data communication networks ?

Sep 16, 2017 | 2003 GMC Yukon XL

1 Answer

Abs light and traction control light are on 2003 gmc yukon

ok there is a device called a clock spring in the steering..

Remove steering
replace clock spring
clear all error codes..

Mar 26, 2010 | 2003 GMC Yukon XL

1 Answer

Rubbing in the front end when i turn right with traction control and abs lights on

Very possible one of the front wheel hubs is faulty and it will set a abs fault code when it fails replace the hub it should repair the problem

Jan 18, 2010 | 2003 GMC Yukon XL

3 Answers

03 Yukon Denali Traction Control/ ABS Problems

my 2000 yukon has the traction control light on and the abs light on any anwsers?

Jul 31, 2009 | 2003 GMC Yukon Denali

Not finding what you are looking for?
2003 GMC Yukon XL Logo

Related Topics:

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

76630 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides