Question about Dodge Caliber

2 Answers

I just had the oil changed yesterday and the change oil reading still appears on the odometer how do i solve this perplexing problem?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

That depends on the vehicle. with most newer cars there are two possible fixes that work usual some just have to be reset with a computer. but try this first. turn the key on not the car and push the brake pedal down all the way and release it fully 3 times. if that doesn't work try it with the gas pedal. thats the first thing i would try before having it hooked to a diagnostics tool.

Posted on Sep 14, 2010

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 613 Answers

What kind of vehicle is this a neon ram ?

Posted on Sep 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i reset oil change button?2003 model Toyota hillux extra cap


Turn the ignition key to 'ON' and press the odometer button until the display reads ODO (not Trip A or B).
Turn the ignition key to OFF.
Hold in the same button you used in step 1.
While holding the button in, turn the ignition key to ON.
The ODOMETER will change to:
5 dashes - - - - -
Then 4 dashes - - - -
Then 3 dashes - - -
Then 2 dashes - -
Then 1 dash -
THEN all zeros 0 0 0 0 0
Then back to the correct mileage.
Then the Maintenance Required light should blink and go out.

Aug 03, 2016 | Toyota Cars & Trucks

1 Answer

"Change Oil" needs to be reset after oil change


Turn key to RUN postion, do not start the engine..
slowly depess gas pedal to floor three tiems within 10 seconds and then turn key to off.

Apr 09, 2014 | 2010 Dodge Grand Caravan

1 Answer

I just had a new battery installed yesterday and this morning there is a message appearing on my dash board >>> TRIP B 199999????????


There should be a peg or reset button next to the odometer. Pessimism and hold for 5 second or so. It should re.set to zero. Your car has two resettable odometers Trip A and Trip B. They can be used to measure the distance of a trip. I normally reset A each time I fill the gas tank and B each time I get an oil change. Nothing to worry about. You can cycle through the three odometers by pressing the reset peg for 1 second or less. The third odometer view is the total miles on the car and cannot be reset.

May 27, 2011 | 2006 Ford Focus

1 Answer

Reset after oil change


AnswerEasy get an oil change at a garage and have them erase the code or do the oil change your self and then disconnect the neg battary terminal. Easier AnswerOn the console, where the oil change light is on, scroll through the items until you get to oil life. Once at oil life, hold the reset button and it will say Engin oil new? Press reset again and this should set you oil life back to 100% without needing to disconnect your battery

Complete Answer
1- Turn on the ignition without starting the car
2- You will get warning messages on the display (including the "change oil soon" or "oil change required" message) press reset for each warning till you get the Odometer displayed.
3- press the setup button until "press reset for system check" appears
4- hit the reset button (need to do this fairly quickly, if you end up back at the odometer go back to step 3)
5- the system will scroll through the different things that are wrong that it has detected, you should go to "oil life XX%, Hold Rest New" message first if nothing else more major has been detected. When on this message hold the reset down unit you get the message "if new oil hold reset".
6 - hold the reset down till the message "oil life set to 100%" appears (note have seen different wording in some models)
7 - system should scroll through any remaining messages and then return to the odometer reading
Switch the car off and on and confirm that the message does not reappear. Have seen some instances where will not reset, if so take to your dealer.

Read more: http://wiki.answers.com/Q/How_do_you_reset_the_'Change_Oil_Soon'_light_in_a_2002_Ford_Explorer_or_Mercury_Mountaineer#ixzz1GbI0wIQ9

Mar 14, 2011 | 2004 Mercury Mountaineer

1 Answer

How do i read my 91 ford explorer odometer?


Are you looking at the odometer or the tripometer? If it only has 5 digits it does not read the tenths of a mile only whole miles. So just read it as milage like 10 miles not 1.0 miles.

Nov 17, 2009 | 1991 Ford Explorer

3 Answers

Change Oil Warning won't go away.


Depends on model and features. 2009 SEL, with no rear seat entertainment:

Place ignition in "Key On, Engine Off" position, then push gas pedal to floor and release 3 times. Turn ignition off, and it should be reset.

The procedure was in the owners manual in the section about the odometer and related features.

Sep 12, 2009 | 2009 Volkswagen Routan

1 Answer

How do u take the change oil light off after changing the oil?


turn ignition key to on position..but do not start the car. push trip odometer button a few times until "OIL" appears. watch the number next to the word OIL and hold the button down until '100' appears. should be reset.

Jul 13, 2009 | 2004 Chevrolet TrailBlazer

2 Answers

Change oil light


do this.. The oil lite is on a timer.. turn key on ( not running ) pump the gas pedal 3 times.. lemmie know if it worked

Mar 08, 2009 | 2006 Isuzu i-280

1 Answer

Remove Oil maintenance required message on 2008 Toyota Highlander


This is the reset proceedure for a 2008 Highlander with a key-type ignition:

Turn the key ON, do not start the engine.

Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..

Now release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

Hope this helps! Thanks for choosing FixYa!

Nov 15, 2008 | 2008 Toyota Highlander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...