Question about 1998 Oldsmobile Bravada

1 Answer

The shift lever button is broken - 1998 Oldsmobile Bravada

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 96 Answers

You can take the top of the shifter off. Then you can push the button thats inside the shifter. You can do that for now until you get a new one. Please rate!!

Posted on Sep 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Firebird - Gear shift button broken- can't shift - A/T


You could remove the handle and pull on the plastic rod, or disassemble the console to access the shift lock.
You may need a shop manual for repair info.

Jan 22, 2014 | Cars & Trucks

1 Answer

My 2004 Honda accord. the gear shift knob the release button broke and I can't get it into gear


All you really need to do is take out the broken know, make sure their aren't any broken pieces inside the shifter handle and use you finger to push the lever down so it could shift, thats it. :-)

Jun 10, 2012 | 2004 Honda Accord

2 Answers

I have a problem. I have a 94 lincoln. It wont go into gear. The automatic gear shift drops all the way down with no shifting


Most likely, either the shift tube is damaged/broken or the screws have backed out of the lever at the end of the shift tube that the shift cable connects to. If the shift lever feels really "floppy", then you probably have a broken shift tube. You will probably have to pull the steering column down to get a good look at the shift tube to see if it is broken and to see how much play is in the shift tube bushings. Also look to see if the lever at the end of the shift tube is loose (shift cable lever).

A little word of caution: If you take the steering column down, be sure to disconnect the shift indicator cable first so it does not get broken. There is a tiny screw in the plastic braket that must be removed then the cable loop will simply slip off of the nipple on the shift tube arm.

Anyway, you will need a T-30 torx bit to work on the shift tube, the shift tube bushings and the lever at the end of the shift tube.

I made you a graphic below to help you understand what I am saying. Please note that it is NOT necessary to remove the steering wheel to do this, but you will need to remove the upper steering column shrouds if the shift tube bushings are loose.




dttech_50.jpg

Sep 23, 2011 | 1994 Lincoln Town Car

1 Answer

My 1997 grand marquic will not go into park, im mechanic enclined, is there something I can do w the linkage


Most likely, either the shift tube is damaged/broken or the screws have backed out of the lever at the end of the shift tube that the shift cable connects to. If the shift lever feels really "floppy", then you probably have a broken shift tube. You will probably have to pull the steering column down to get a good look at the shift tube and see how much play is in the shift tube bushings, check the shift tube to see if it is broken and see if the lever at the end of the shift tube is loose (shift cable lever).
A little word of caution: If you take the steering column down, be sure to disconnect the shift indicator cable first so it does not get broken. There is a tiny screw in the plastic braket that must be removed then the cable loop will simply slip off of the nipple on the shift tube arm.

Anyway, you will need a T-30 torx bit to work on the shift tube, the shift tube bushings and the lever at the end of the shift tube.

I made you a graphic below to help you understand what I am saying. Please note that it is NOT necessary to remove the steering wheel to do this, but you will need to remove the upper steering column shrouds if the shift tube bushings are loose.

dttech_48.jpg

Sep 20, 2011 | 1997 Mercury Grand Marquis

1 Answer

MY TOW/HAUL BUTTON ON MY GEAR SHIFT WILL WORK FOR


The lever "pivot" has broken the wire leading up to the switch. Replace switch (I believe you must purchase the entire lever)

Nov 20, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Shifting lever doesnt lock


Likely the shift detent mechanism is broken. It's inside the unit and can be reached by removing the trans pan. It should be just inside where the shift lever goes through the case.

Mar 17, 2009 | 1995 Jeep Grand Cherokee

2 Answers

04 Navigator gear shift button broken


I only have 2003 Nav procedure. Maybe get used part at car-part.com. Page with * is lowest price.

SECTION 307-05: Automatic Transaxle/Transmission External Controls 2003 Expedition/Navigator Workshop Manual
REMOVAL AND INSTALLATION Selector Lever —Floor Shift Removal and Installation
  1. Lift the floor shift PRNDL bezel.
  1. Disconnect the PRNDL bezel wire harness connector.
  1. Remove the shift lever handle and cover.
    1. Slide the handle bezel down.
    1. Remove the screw.
    1. Disconnect the TCS wire harness.
    1. Lift assembly from the shifter lever.
b038436.gif
  1. Position the window regulator control panel aside.
  1. Remove the screws and the console finish panel.
  1. Remove the left side console access panel.
  1. Disconnect the transmission shift cable from the transmission selector arm.
  1. Remove the transmission shift cable retaining clip from the floor shift mechanism through the console access.
  1. Remove the four bolts retaining the floor shift mechanism to the floor.
  1. Disconnect the floor shift mechanism wire harness connector.
  1. Remove the floor shift mechanism from the console.
  1. Remove the brake shift interlock actuator, parking brake release mechanism and harness.
    • Remove the wire harness retainers.
    • Remove the wire harness retainers.
    • Remove the two screws retaining the brake shift interlock assembly.
    • Remove the two screws retaining the parking brake controller.

Mar 15, 2009 | 2004 Lincoln Navigator

Not finding what you are looking for?
1998 Oldsmobile Bravada Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...