Question about 1999 Toyota Camry

1 Answer

Gear panel and air controls do not light up - 1999 Toyota Camry

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 228 Answers

If the instrument panel lites work,check the bulbs, or for an open in the wiring to the effected items.The gear selector and the a/c ,heater panel.is on the same circuit with the instruments panel.Check for an open ground too.

Posted on Sep 14, 2010

  • tmblewis Sep 14, 2010

    idk where to look

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Malibu blows hot air from vents no matter where temp is set and on ac also


Blend door is not working. Could be the door is stuck, wiring issue, bad actuator or control panel issue. In your car, the actuator is not too hard to access. Follow the instructions to access the actuator. Check the connection. Before removing the actuator, turn the key on and change the temp setting. If you hear clicking from the actuator, it has probably stripped its gears. If not, remove the actuator and check to see if you can rotate the door by hand. If not, you will need to remove the duct to see why the door is jammed. If the door rotates by hand, plug the connector back into the actuator, turn the key on again, and change the temp setting while watching the gear on the actuator to verify operation. If the actuator doesn't turn the gear, the problem is with the actuator or the controller. Remove the connector again and probe the connector with a voltmeter. Turn the key on again and probe the terminal of the light blue wire. There should be voltage there when you change the temp setting. If not, the problem is with the control panel. If there is voltage of a few volts or more, the problem is the actuator.

Removal & Installation

Remove the fuse labeled HVAC CTRL (BATT).
Remove the left closeout panel.
Remove the knee bolster.
Remove the air temperature actuator screws.
Remove the air temperature actuator.
Remove the air temperature actuator wire harness connector.
0996b43f80203063-xpf45b2xmdrdbg0gt251xk4c-2-2.gif

To install:

Install the air temperature actuator wire harness connector.
Install the air temperature actuator and tighten the mounting screws to 13 inch. lbs. (1.5 Nm).
Install the knee bolster
Install the left closeout panel.
Install the fuse labeled HVAC CTRL (BATT).


121e2843-8cce-4a63-9ef0-72fd8f23fbad.gif

121e2843-8cce-4a63-9ef0-72fd8f23fbad.gif

Jul 25, 2017 | AC Cars & Trucks

1 Answer

Which fuse to change for steering wheel lights and gear shifter lights 2010 ford edge


It's not a fuse , the SJB - smart junction box controls these lights ! This is fords body control module . If the Heater / A/C control panel ,hazard switch ,headlamp switch , message center switch all work, it is not a fuse . The gear shifter I would say the bulb is burnt out . The steering wheel lights could be out because of an open in the clock spring . The clock spring is a device inside the steering column under the steering wheel that keeps your horn , cruise control , radio buttons etc... connected electrically . How cars clock spring works

Feb 04, 2016 | 2010 Ford Edge

1 Answer

Crusie control


Scanned ??? Codes ????

Mar 24, 2014 | 2002 GMC Sierra

1 Answer

One mechanic believes the throttle control module is bad. He notes the car is staying in a higher gear. Which is what it drives like but it is intermittent. The air conditioning fan quit blowing and the...


Hi, Your mechanic could be right. Sounds like the engine is running too fast for transmission to shift properly. Have him look it over. Good luck.

Jun 15, 2011 | 2000 Chevrolet Blazer

1 Answer

Remove & replace heater core on 1997 blazer


Disable air bag system. See AIR BAG RESTRAINT SYSTE
EQUIPMENT section.

Remove instrument cluster trim plate. Move tilt ste
and move automatic transmission gear selector to lo
w (if equipped).

Remove left underdash hush panel.
Keyless Entry (RKE) module connectors. Remove cente
release cable from instrument panel. Disconnect par
k brake cable from ratchet mechanism.

Remove right underdash hush panel. Remove lighter a
light. Remove knee bolster. Partially pull A/C-heat
back of A/C-heater control panel and radio.

Remove 4 steering column retaining bolts and lower
grilles. Remove 9 instrument panel support bolts.

Mar 18, 2010 | Chevrolet Blazer Cars & Trucks

3 Answers

Idles up and down


bad plug wire or spark plug most likely which is most common when the rpm's don't hold steady

Feb 28, 2010 | 1996 Pontiac Grand Am

1 Answer

The instrument panel waring lights started to blink off and on than today the anti lock light was on the trac light says its off. The air bag light is on. the speedometer needle jumped all over it wont go...


there should be a ground bar near the drivers seat sometimes located under the lower kick panel pull up the door sill push the carpet back look for corrosion here

Aug 19, 2009 | 1998 Buick Regal

1 Answer

Heater control panel and gear shifter lights out


it should be a problem related to fuse. did u check your fuse box?

Nov 05, 2008 | 1995 Subaru Legacy

1 Answer

No lights on the front panel


i had the same problem and my alternator went out when i replaced it allthe light came back on u might try that

Aug 28, 2008 | 1999 Chevrolet Malibu

Not finding what you are looking for?
1999 Toyota Camry Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...