Question about 1990 Plymouth Grand Voyager

1 Answer

I have a 1990 plymouth grand voyager se 3.3 that pulls to the right had an alignment done and the caster on the left is at 1.4 and on the right is at 0.9 the specs call for -0.3 thu 1.7 how can i adjust my caster angle. to stop the pull

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

If the alignment shop could not adjust it . Take it to one that can. You can not adjust the caster with out the right equipment. If the vehicle has suffered accident damage and that is the reason for the lack of adjustment, have a body shop with a frame stretcher adjust the alignment . It will cost more but they will fix it right, not just take your money and say sorry it can not be fixed because we do not know how to do it, or do not have the right equipment.

Posted on Sep 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I down load the user manual for a 1993 Plymouth grand voyager SE?


Plymouth.com/manuals Look for your year. You may have to look under archives.

Dec 28, 2014 | 1993 Plymouth Grand Voyager

1 Answer

Serpentine route on 1990 plymouth grand voyager SE If you know an exact web-site with a diagram would be even better. Did it before just can't remember the exact. I have too much belt left.


You can register for free at www.autozone.com Once registered you'll have free access to a variety of manuals and repair guides, most containing detailed diagrams.

Feb 08, 2011 | 1990 Plymouth Grand Voyager

1 Answer

2008 Mazda Cx 7 Grand Tour: Tires rotated, basic 4 wheel allignment, car still pulled to right. 2nd visit 4 wheel allignment they reversed the strut mount to enhance adjustment, still pulls to the right....


I have a 2007 CX-7 and my vehicle did the same thing. There is a Technical Service Bulletin on the the problem that explains how to correct the pull. It basically states that the technician has to rotate the position of the strut mount on the left side 180 degrees to the right which should lower the left side caster angle. Any good alignment shop will know that the right side caster angle should be .5 degrees higher on the right to compensate for the crown of the roadway. For example my readings were 3.2 on the left and 2.8 on the right. This is reversed and is why my car pulled to the right. After the strut mount was rotated my reading were 2.4 on the left and 2.8 on the right. That all but eliminated the pull. Verify your caster readings on the alignment printout. If this was already done then there isnt much more that can be corrected. Mine still has a slight drift to the right.

Jun 25, 2010 | 2008 Mazda Cx 7

1 Answer

On a 1990 Plymouth Grand Voyager what is the block that the brake lines go into on the drivers side rear?


It has to do with the load leveler, which is nothing but trouble trying to get the back brakes to work right. If you are having a problem getting good brakes to the back, it's not a bad idea to by-pass this block.

May 19, 2010 | 1990 Plymouth Grand Voyager

1 Answer

I need the exact fireing order for a 97 plymouth grand voyager 3.0


The firing order for your engine is 1-2-3-4-5-6. If you are standing in front of your vehicle looking at the engine the left rear is #1, left front is #2, middle rear is #3, middle front is #4, right rear is #5, right front is #6. Now on the coil block it is different the middle rear is #1, left front is #2, right rear is #3, middle front is #4, left rear is #5, and right front is #6. Hope this helps

Feb 14, 2010 | 1997 Plymouth Grand Voyager

1 Answer

Diagram of firing order for 1990 plymouth grand voyager


My apologies for the delayed response.
I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.
I do not know if you still need this information, but I am answering it either way.


I do not know if you have the 2.5L (4Cyl) or the 3.3L (6Cyl); however I have included both below.

For the 2.5L (4Cyl):
Firing Order:
1-3-4-2
Cylinders:
(back of engine)
1-----2-----3------4
(front of engine)
Distributor:
.....(back)
.....1...3
(+).........(+)-screws
.....2...4
.....(front)

For the 3.3L:
Firing Order:
1-2-3-4-5-6
Cylinders:
(back of engine)
1------2------3
4------5------6
(front of engine)
Ignition Coil:
(back)
6---3
4---1
2---5
(front)

Again my sincerest apologies....

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Nov 08, 2009 | 1990 Plymouth Grand Voyager

1 Answer

Locter heater coil 99 plymth grnd voyager 3. liter


it is under dash, drivers side. dash has to be pulled for installation. go to PDF PDFTown.com. should have instructions, or go to auozone.com, and register for znet. it has installation for your HEATER CORE there. good luck.

Sep 01, 2009 | 1990 Plymouth Grand Voyager

1 Answer

I have a 2002 daewoo nubira cdx


Well without seeing it I don't know whats bent or not but your caster angle causes a pull since it is pulling right you need to add more caster to the right side or make the left side caster less.If it is the tires rotate left front to the right front and the right front to the left if it goes straight or pulls left its in the tires if it still goes right its in the alignment.

Jun 15, 2009 | 2002 Daewoo Nubira

Not finding what you are looking for?
1990 Plymouth Grand Voyager Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7727 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...