Question about 2007 Volkswagen EOS Convertible
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: changing rear brake pads
For front brake pads replacement you need only usually wrench set, inclusive 7 mm allen key also.
But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake automatic adjustment!!!
For front brake pads. First you must verify yours front brake disc diameter: 280 mm or 288 mm. (On my car y have 288 mm). After that you can buy the brake pads (with wear sensor). For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow:
1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose!
2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper.
3. Now you must thoroughly clean the brake calipers (free of grease).
4. Remove outer brake pad from brake carrier.
5. Pull inner brake pad out of brake caliper piston.
6. Check up the brake fluid level on the reservor, and emptying if neccessary!
7. Push piston back into brake caliper housing.
8. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward).
9. Install outer brake pad into brake carrier.
10. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm.
11. Install both caps.
12. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!!
Please rate my response. Thanks!
Posted on Apr 09, 2010
Tips for a great answer:
Mar 07, 2014 | Cars & Trucks
Mar 04, 2013 | 2007 Volkswagen EOS Convertible
Aug 27, 2012 | 2004 Volkswagen Touareg
Jun 16, 2011 | Volkswagen Eos Cars & Trucks
Mar 06, 2011 | 2007 Volkswagen EOS Convertible
Dec 15, 2010 | 1999 Volkswagen Jetta
Sep 05, 2010 | 2008 Volkswagen Eos
Jun 17, 2010 | 2004 Volkswagen Jetta
Nov 07, 2009 | 2008 Volkswagen Eos
Mar 09, 2009 | 1999 Volkswagen Beetle
Aug 13, 2014 | 2007 Volkswagen EOS Convertible
1,763 people viewed this question
Usually answered in minutes!