Question about 2006 Mitsubishi Galant

1 Answer

I've got a 2003 Mitsubishi Galant. My brake indicator comes on when it's cool or wet out, leading me to believe it's a sensor problem. I had my rear brakes rebuilt in April and the front brake pads still have about 50% left. My fluid has been checked and is ok. How involved is it to check the sensor?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 613 Answers

You get a voltmeter and check the ohms reading from the brake sensor see if it still works correct or broken hope this helps

Posted on Sep 13, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

When i cut headlight switch on brakes lights come on

This is a earthing or grounding problem in the rear wiring loom to the rear tail light or parking lights.
Have the ground terminals in the rear of you vehicle checked and this should solve that problem.

Oct 14, 2011 | 2003 Mitsubishi Galant

1 Answer

Im changing an 02 sensor Bank 1 Sensor 2 on an 03 mitsubishi galant 3.0L. which set of cylinders is Bank 1, front or rear?

bank one is the one facing the rear of the vehicle with the number one cylinder ,, and believe it or not the firing order is 1 2 3 4 5 6

Jun 14, 2011 | Mitsubishi Galant Cars & Trucks

1 Answer

Under the hood by the radiator two fan motors not working on 2003 mitsubishi galant is this related to the air conditioning

yes, one is a/c cooling fan, check fuses @ relays one is engine cooling fan. the a/c cooling fan should come on when a/c is turned on inside vehicle

Aug 15, 2010 | 2003 Mitsubishi Galant

1 Answer

How to take rear drums off 2003 mitsubishi galant

Hello, there are two ways to get the drums off. One way is to use a brake spool, behind the drum is a small little opening (possible covered with a rubber tab just remove that). Inseart the brake spool into the the opening and rotate the star wheel till the brakes are backed off the drum. Second choice is use a hammer, very carefully tap around the drum until you can pull it off.

Sep 27, 2009 | 2003 Mitsubishi Galant

1 Answer

Cooling Fan not coming on 2002 Mitsubishi Galant

Check the fan itself for free turning--if it grinds or is hard to turn, replace the fan motor. The engine heat sensor reports temperature to the computer which turns on the relay and it turns on the fan motor. If you have A/C, turn it on--that should force the fan on all the time the car is running. If that works, then replace the sensor. If you don't have A/C, take a chance on the sensor--it's not too expensive. Wrap the threads with several turns of teflon tape when installing and don't over-tighten.

Sep 03, 2009 | 2003 Mitsubishi Galant

1 Answer

I Have a problem with my 2000 Galant TCL and Antilock Brake light. They stay on constantly since I had a rear flat tire.


Aug 10, 2009 | 2004 Mitsubishi Galant

1 Answer

100,000 mile service

Generally oil change and filter. Check/clean/ replace air filter. Plugs and/or leads. The tricky one is the timing belt. If it hasn't been changed to your knowledge then change it.( garage ) Brake pads and discs. Change as required. Coolant levels.

Mar 14, 2009 | 2003 Mitsubishi Galant

2 Answers

Galant rear wheel hub

remove your rear wheel then remove the brake assembly. there are 4 bolts that hold the hub to the rear axel with anti lock brakes you will have a wire to remove from the hub. it may tak a large hammer and chisel to remove the hub. but it will come off. then reinstall (if there is any shims behind the hub they must be put back in in the same directions (these are alignment shims) some have some dont. tighten bolts and test drive the ca 5 miles or so. then retighten the lug bolts. and then again after 100 miles.
hope this helps 99116a8.jpg

Aug 09, 2008 | 2003 Mitsubishi Galant

Not finding what you are looking for?
2006 Mitsubishi Galant Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides