Question about Oldsmobile Omega

1 Answer

How do i replsce s headlight on a 1983 Omega?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,984 Answers

PLEASE DON'T FORGET TO RATE!

  1. Remove the headlamp trim panel (grille panel) attaching screws.
  2. Remove the four headlamp bulb retaining screws. These are the screws which hold the retaining ring for the bulb to the front of the car. Do not touch the two headlamp aiming screws, at the top and side of the retaining ring, or the headlamp aim will have to be readjusted.
  3. Pull the bulb and ring forward and separate them. Unplug the electrical connector from the rear of the bulb.
  4. Plug the new bulb into the electrical connector. Install the bulb into the retaining ring and install the ring and bulb. Install the trim panel


How do i replsce s - addf3bf.jpg To remove the headlights, unfasten the retaining screws, then remove the headlight trim


48161cd.jpg Remove the 4 headlight retaining ring screws (A). Do not confuse these with the aiming screws (B)


801c856.jpg Remove the headlight retaining ring, but make sure the headlight doesn't fall out of the assembly


How do i replsce s - c776dce.jpghttp://i.fixya.net/uploads/images/c776dce.jpg" alt="c776dce.jpg" class="h_mi" /> Pull the headlight out of the mounting plate, unplug the electrical connector and remove the headlight

Posted on Sep 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Headlight wont work


Sounds like you have a bad earth.

Aug 28, 2014 | 1983 Jeep J20

1 Answer

I drive a 1983 Jeep CJ7... My dash lights and tail running lights are not working. I replaced the headlight switch and the headlight dimmer switch, i've checked all of the fuses and still no luck. I h


as simple as this is going to sound its been my exspirence with the cj's they loose ground back at the light housing. try taking off the light and ill bet there will be some rust there. use a small peice of 180 sand paper to scratch off the dibris and reatach and you sould see the lights return. hope this helps and let me know. thanks and good luck.

Apr 11, 2014 | 1983 Jeep CJ7

1 Answer

: headlights wont come on, but parking lights work...i dont get it


If you know the headlight bulbs are good, it's probably a bad headlight switch. The headlight wiring for an '83 should be pretty simple and straight forward

Apr 04, 2013 | 1983 Chevrolet Blazer

1 Answer

I removed a set of after market fog lamps on my 1983 280ZX. Now my headlights, tail lights, horn and turn indicators don't work. Anyone have any idea what I should check.


Whoever put the aftermarket fogs in probably tapped power from your headlight circuit. That being said, you probably shorted out a fuse or two when you removed them. Just go through and check your fuses/relays under the hood and inside the cabin. Make sure to use electrical tape to tape off the old wire for the lights or this will happen again...

Apr 29, 2010 | 1983 Nissan 280ZX

1 Answer

Keeps blowing fuse in fuse block ,burnt block and wire also burnt headlight switch replaced headlight switch and still blowing fuses lights will not work at all now


The positive wire in the headlight circuit is shorted to ground someplace, you have to check the wire by following it from where it connects to the headlight back to the switch and then to the fuse block

Jul 24, 2009 | 1983 Chevrolet Chevy

1 Answer

Headlights don't work on 1983 chevy el camino


check the wires for loose connection and the fuse or fusible link.

Jul 22, 2009 | 1983 Chevrolet El Camino

1 Answer

81 cj7 headlights dont work


check your fuse, if good check or replace headlight, if that is good then check the headlight switch, easy to change. good luck

Jun 12, 2008 | 1983 Jeep CJ7

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...