Question about 2007 Chevrolet Suburban Three-Quarter-Ton LS

1 Answer

My car is 2007 chevy suburban 5.3 llitter and i get stabilitrack of light is on at idleing and when i go higher rpm it turns off.and cuple days ago i had check engine light on and the code was missfire ishue.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 339 Answers

Hi. It is possible that the stabilitrak light is only an indicator to another problem. The main issue is the condition of your engine. When there is a check engine light, a code usually sets. The stabilitrak system doesnt function well if it detects that the engine master(the ECM) is not feeling well. Better have your vehicle scanned to determine the exact source of engine fault, and the stabilitrak will improve in effect. Okay? : )

Posted on Jun 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many speed sensors are on a 2007 chevy equinox?


there should be one speed sensor for every wheel some speed sensors are located in the wheel hub

Jan 18, 2014 | 2007 Chevrolet Equinox LS New Cars

1 Answer

93 chevy suburban v-8 tbi hard to start, but starts, will run but will not idle, can keep it running or driving as long as you rev engine constantly. Holding engine at half throttle it will slow and die. ...


Assuming your engine is in good mechanical condition, there are only a few options.

1. You may have a vacuum leak.
2. The pickup in the distributor may be worn to the point that it is sloppy at idle but normal at higher rpm.
3. Idle control valve/motor may not be working properly.

It probably isn't an ignition related problem as the problem would normally get worse as RPM increases. I've seen #2 about 5 times in the past year or 2 so it's not uncommon and would recommend replacing the entire distributor if you come to that conclusion, but would definitely check all vacuum hoses first.

Jun 24, 2011 | 1993 Chevrolet Suburban

1 Answer

2007 Tahoe LTZ check engine light and stabilitrack light went on and lost acceleration. Pulled over, shut off the engine for 5 mins then restarted, then a horrific engine click/clank when I rev the engine...


The engine noise is not related to the stabilitrack. Stabilitrack is usually caused by a bad wheel sensor. Get the trouble codes read to find out exactly what's going on. Which engine do you have?

Jul 06, 2017 | 2007 Chevrolet Tahoe

1 Answer

Idle rpm too low


are you reading your rpms right....5-6000 rpms should equal 70- 85 mph....that is certainly not idle speed....invest 20bucks in a Haynes manual----it is good reading

Mar 01, 2010 | 2007 Chevrolet TrailBlazer SS

3 Answers

Ignition timing specs for a 1986 Chevy 454?


Automatic I presume. 8 degrees BTDC @ warm & 700 RPM.
distributor vacuum off & plugged. In drive, & accessories off.
Don't forget parking brake on.

Jul 16, 2009 | 1986 Chevrolet Chevy

1 Answer

Rough idle at higher rpm smooth


You have a vacume leak somewhere. You can try to listen for it or you can get a can of brake parts cleaner and spray it around the engine. Anywhere there is hoses or connections of any kind. When you find the leak the engine RPM's will increase. If thats not the problem it could be your EGR valve is clogged or your map sensor could be bad. Those things would usually cause a check engine light. Vacume leaks wont. Good luck

Jun 19, 2009 | 1985 Chevrolet Chevy

Not finding what you are looking for?
Cars & Trucks Logo

814 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...