Question about 1995 Jeep Grand Cherokee

1 Answer

How do i change the front side maker lights on '95 grand chkee?

Posted by on

  • cmortensen Sep 14, 2010

    This answer was helpful because he said Screws, as as in more than one. It would have been more helpful if he had told me I had to FORCEFULLY pry the turn signal lens down from the headlight to see a COMPLETELY hidden screw on the bottom of the side marker lens. The screw on the top of the side marker lens is in plain sight. This is the most ridiculous setup I have ever seen. Further information; this side marker lens must be removed before you may access the turn signal bulbs also.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 2,984 Answers

Side Marker Lights

  1. Remove the screws from the marker lens and separate the lens from the headlight bezel.
  2. Pull the bulb from its socket in the back of the lens.
  3. Installation is the reverse of removal.

Posted on Sep 13, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

95 Jeep Grand Cherokee front end feels like it's fighting either side either way I turn cv shafts are <10k on feels like the front spider gear is stuck

Not familiar with the ZJ, but does it have a locking differential? Do they use limited slip additive in ZJ diff? If so, then its probably due for a fluid change and new additive.

Nov 05, 2013 | 1995 Jeep Grand Cherokee

1 Answer

3.8 crack in exhaust manifold whats involved in changeing it

the 3.8 ltr engine is a v6 configuration , so there are two exhaust manifolds... one at the rear (firewall side) and one in front.

the front one is easier to replace of course.

Mar 25, 2013 | 2000 Dodge Grand Caravan

1 Answer

95 grand marquis no turn signals changed the switch still didnt work changed the lcm no change all the fuses are good . next problem have no climate control nothing lights up fuses are good thank you

check the turn signal flasher,also check the bulbs some autos,are designed to do this.
If there is a blown bulb,the turn signal on that side will not blink,but will burn steady to tell the driver,a short in wiring can also cause this

Sep 25, 2011 | 1998 Mercury Grand Marquis

1 Answer

Trying to replace cooling fan relay on 95 grand am with 3.1, but i cannot locate the relay

It is easy to locate:
Under the hood right side directly in front of the driver in the rear right corner of the engine compartment ..there are four relays commonly the second one from the right hand side
It's wires is
red to terminal 30
red to terminal 85
dark green to terminal 86
light blue to terminal87

Apr 11, 2011 | 1995 Pontiac Grand Am

1 Answer

How do you remove the front side marker lights on a 95 grand cherokee

hi i have that vehik myself. you have to pop the hood to get to one screw. and the other screw at the bottom you can just get a screwdriver between the cover and the black molding. its not to bad i just replced mine a few weeks ago. best of luck. keep on jeep-n-

Jan 14, 2011 | 1995 Jeep Grand Cherokee

1 Answer

2000 jeep g. chkee 4.0, no power to fuel pump,

have you checked to make sure the ecm has power to it? a quick way to tell is when you turn the key on, the service engine soon light should come on until you have started the vehicle. If it does not come on, you are not getting power to the ecm, which would cut power to the fuel pump, etc, etc

Aug 25, 2009 | 2000 Jeep Grand Cherokee

2 Answers

1995 Jeep Grand Cherokee interior lights won't shut off

On the 95 Jeep Grand Cherokee if you look in the glove box, on the front of it there are 3 screws remove them and there are relays and fuse under it. the front one on the right hand side is the interior lights.

Jul 25, 2009 | 1995 Jeep Grand Cherokee

1 Answer

I ned to change left side marker light up front bulb 194na how do i get assembly out on 1996 mercury grand marquis

I changed the front left marker light on side of headlight assembly by unscrewing the screw on the far back of it. then i just pulled it off. it felt like it was gonna break but it came off just fine

Mar 22, 2009 | 1996 Mercury Grand Marquis

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides