Question about Chevrolet Impala

1 Answer

How to remove a 1963 chevrolet impala steering wheel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,984 Answers

  1. Disconnect the battery ground cable. Disconnect the chassis wiring harness from the steering column harness at the connector under the instrument panel.
  2. Remove the horn button cap or the center ornament and retainer. Withdraw the three screws from the receiving cup.
  3. Remove the receiving cup, belleville spring, bushing, and pivot ring.
  4. Remove the retaining circlip with a suitable pair of pliers, if applicable.
  5. Remove the steering wheel nut and washer.
  6. Using a steering wheel puller, carefully remove the steering wheel.
  7. Install the steering wheel using the reverse of the procedure above. Before installing the steering wheel, be sure that the directional signal control assembly is in the neutral position.
I have pics but too many to post. What is your email and I can send them to you.

Posted on Sep 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the clock spring from a 2002 Impala?


IS THE CLOCKSPRING NOT AT THE BOTTOM OF THE COLUMN??YOU MAY BE LOOKING AT THE HORN

May 12, 2014 | 2002 Chevrolet Impala

1 Answer

2002 impala the audio controls on the steering wheel stopped working


it could be your clockspring; it carries multiple electrical signals to and from the steering wheel (audio controls, horn, airbag). the wheel has to be removed to gain access to it for replacement, but it can be tested without removal. the easiest way to test it is with a diagnostic tool

Mar 14, 2013 | 2002 Chevrolet Impala

2 Answers

Chevy Impala leaking steering fluid and steering wheel stiff.


ck. p.s hoses 4 leakage fill pump have someone turn wheel back & forth look 4 leak

Nov 06, 2012 | 2000 Chevrolet Impala

1 Answer

How to install a turn signal switch on a 2002 chevrolet impala


your going to unscrew the 4 bolts right behind the steering wheel and go to autozone to get a steering wheel remover or i forgot what it was called and follow instructions be careful witht the air bag and one you have it off youll see the wires leading from the switch hope this helps

Aug 26, 2012 | 2002 Chevrolet Impala

1 Answer

Would like to change on / off switch button in steering wheel for the cruise control on a 2005 impala, how do I remove the steering wheel airbag?


YOU NEED TO DISABLE AIR BAGS.FIRST. TURN OFF RADIO THEN DISCONNECT NEGATIVE BATTERY CABLE.WAIT 20 MINUTES FOR AIRBAGS DISCHARGE.THEN REMOVE AIRBAG IN THE STEERING BY REMOVING SCREWS BEHIND AIRBAG IN STEERING WHEEL.

May 25, 2011 | 2005 Chevrolet Impala

1 Answer

Ignition switch 2001 chevrolet impala


YOU NEED A HAYNES REPAIR MANUAL WITH PHOTOS TO SHOW YOU HOW TO REMOVE STEERING WHEEL AND DISABLE AIRBAGS.YOUR IGNITION SWITCH IS IN THE STEERING COLUMN.

Jul 07, 2010 | 2001 Chevrolet Impala

1 Answer

Where is the flasher for signal lghts on 04 Impala?


On the Impala the flasher is located behind the dashboard, just to the right of the steering wheel. You have to remove the dashboard to get to it. It square and about 2" long. To remove the dash:
- remove the two fuse compartments doors or lids, that are on either end of the dashboard. there are two screws to remove on both sides.

- Remove the kick plate beneath the dash on the passenger side.
- Remove screws beneath the dash on drivers side
- Adjust steering wheel to the full down position
- Move Shift lever all the way down

May 09, 2010 | 2003 Chevrolet Impala

1 Answer

2007 Impala SS with 30,000 miles mysteriously jumps from cd/aux to radio...


Do you have the steering wheel controls? If so, my guess is the "source"button on the steering wheel control maybe sticking. If I remember, I'll look at my Impala and see if the contol can be disconnected at the steering wheel.

Jul 07, 2009 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

2005 Chevy Impala key seats in ignition but will not turn


With the key in the ignition try turning the steering wheel side to side, it may require a bit of force in either direction to get the wheel freed up and allow the key to turn. This happens when you don't allow the steering wheel to come to a resting spot before removing the key from the ignition.

Apr 11, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...