Question about Nissan Quest
1999 Nissan/Datsun Truck Quest Mini Van 3.3L SFI 6cyl
The thermostat is located in the thermostat housing, which is mounted to the coolant crossover tube. The bypass hose is connected to the thermostat water inlet on one end, and to the intake manifold water outlet on the other. The thermostat is not located in the intake manifold water outlet, where the upper radiator hose is connected.
Fig. Thermostat water inlet sealant application
Posted on Sep 13, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Are you sure you have a distributor? Those wnet away many years ago. Everything is now electronic including the spark distibution.
Posted on Jan 08, 2010
SOURCE: 1999 nissan quest
Rigoe the points for the timing belt are usually located on the sprokets in conection with marks or dots on the engine block some where around the sprockets that hold the timing belt. Remenber to bring the piston number one to TDC (top dead center), this means you have to locate the piston number one, take the spark plug out and turn the cranshaft (the one with the pulley) by hand until the piston is all the way up. On the distributor the rotor should point to the spark-plug wire number one (you can make a mark outside of the distributor cap where the number one spark-plug wire is pointing so when you take the cap off you can see if the rotor is pointing the same direction). With the timing belt cover off you are going to be able to aling all this points at the exact locacation all together. So we have: Piston number one at TDC, The rotor(enside the distributor cap) pointing to the number one spark-plug wire, and the mark of the sprockets pointing the marks of the engine block( litle dot or dash). If you get all this right you are have done a good job and ready to make a trip you can get all this just by turning the cranshaft by hand with a rachet and a big socket. God bless you.
Posted on Apr 11, 2009
SOURCE: 1999 Nissan Quest washer tank
Visit the site below for the needed parts:-
Rate this solution.
Posted on Jan 11, 2010
The Quest has a non interference engine meaning that should the belt break the engine would just die without breaking anything. Nissan recommends 105K for changing but that depends on the way the vehicle was driven (driving habits), road conditions etc. If driving on roads for e.g. that are hilly, it labors the engine more thus shortens the lifespan of the belt according to mfg.
Posted on Mar 18, 2010
Tips for a great answer:
May 02, 2013 | Nissan Cars & Trucks
Jan 17, 2013 | 1997 Nissan Quest
Jun 27, 2010 | 1994 Nissan Quest
Jan 11, 2010 | 1999 Nissan Quest
Jan 08, 2010 | 1999 Nissan Quest
Dec 03, 2009 | 1999 Nissan Quest
Oct 08, 2009 | 1999 Nissan Quest
2,532 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: