Question about Chevrolet Uplander

1 Answer

After starting 2006 chevy uplander the battery voltage goes to 14.4 then while driving it jumps between 12.8 and 15.1 amps. after driving for about 15 minutes the voltage starts dropping, I shut it off by the time it reaches 12.2 amps.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 96 Answers

Take your battery to get tested first. Usually any auto parts store will do it. If the battery is good then check the alternator. To do this you have to physically take the alternator out and take it to the store unless you have a tester than you can test the alternator while its in the car. hope I was of some help.

Posted on Sep 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 Chevy Uplander this last weekend we were headed home from my sister in-laws when we were half way home the charging system failure light came on and the


You might not have a good connection on your jump. Remove the battery and alternator and have both tested at your local parts store. My guess is the alternator is bad and the battery just needs a charge. If they both test good, you have a short somewhere in the truck.

May 30, 2017 | Cars & Trucks

1 Answer

Why is my chevy uplander keep jumping when in first and second gear?


Is the vehicles check engine light on steady or flashing ? Sounds like an engine misfire .

Oct 09, 2015 | 2007 Chevrolet Chevrolet Uplander

1 Answer

2006 uplander: how to replace battery on my Chevy uplander


If you go to Autozone or Sears, they will do that for you, free,at Autozone, and free at Sears, if you buy the battery there.
Hope this helps.

Mar 29, 2015 | 2006 Chevrolet Chevrolet Uplander

1 Answer

Please need a help my chevrolet uplander 2006 doesn't start up I mean no power at all neither click nor even the lights of the car .... More clarification ... No electricity no ignition to the engine...


check battery voltage must be over 12 volts, make sure cables are clean and tight, try jump starting it, if it starts check voltage running should be over 13.5 volts, if not have alternator tested

Sep 01, 2013 | Cars & Trucks

1 Answer

How to change drive belt for 2006 chevy uplander


if you're refering to the serpentine drive belt, most are held tight with the tentioner & you will need a 3/8'' drive breaker bar to pull back on it & while doing so, remove the belt carefully & then gently releasing the tentioner. most have a square 3/8'' hole in the middle of it to insert the tool & is easier to remove from under the vehicle. hope this helps.

Dec 01, 2011 | 2006 Chevrolet Uplander

1 Answer

2006 Chevy Malibu will not start. The car was running fine. We pulled into the garage, turned off the car in order to empty groceries. We went back out and tried to start the car, but all the lights...


Try jumping. Suspect battery or alternator. If you can jump it, use voltmeter to check battery voltage with engine running. If voltage is less than 14, your alternator is bad. If you don't have a meter, take the alternator to be tested.

Aug 29, 2010 | 2006 Chevrolet Malibu

2 Answers

Rear wiper on chevy uplander does not work. fuses


i have a 2006 chevy uplander and i need to change the low beam headlamp how do i do it, also about a month after we had got the van the rear wiper stopped working i haven't checked the fuse yet, but is this a common problem for the uplander, and also the abs light stays on what should i do for that problem, and also when we drive it and then shut it off it does not want to turn on right away.

Oct 25, 2009 | 2006 Chevrolet Uplander

1 Answer

2005 Chevy Uplander


The Battery Is A Little Low But Its Probably From Trying To Start It.Pull The Starter Out And Make Sure It Isn't Hanging Up.

Jan 15, 2009 | 1991 Cadillac Seville

2 Answers

2006 Chevy Silverado alternator intermittent charging


Perfectly normal.
Starting with the 2005 model year, light duty full size pickups and utilities are equipped with a new Regulated Voltage Control (RVC) system. This system reduces the targeted output of the generator to 12.6-13.1 volts when in "Fuel Economy Mode" to improve fuel economy. The generator may exit "Fuel Economy Mode" if additional voltage is required. This will cause the voltmeter to fluctuate between 12 and 14 volts as opposed to non-regulated systems that usually maintain a more consistent reading of 14 volts. This fluctuation with the RVC system is normal system operation and NO repairs should be attempted.

Jan 03, 2009 | 2006 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...