Question about Plymouth Prowler

1 Answer

Remove the rear bumper

How do you remove the rear bumper on a Plymouth Prowler?

Posted by on

  • Anonymous Mar 13, 2014

    How do i replace the rear bumper of a 99 pontiac grand am

  • Anonymous Mar 14, 2014

    remove 2005 envoy rear bumper

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 291 Answers

Removing Prowler Rear Bumpers First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps.

Posted on May 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the trans filler?


It has a filler tube:

How do you add transmission fuild to a Plymouth prowler

www.answers.com > ... > Plymouth (car) > Plymouth Prowler
Simply pull the handle out of the trans fuild filler port in the engine ... produced from1999 to 2001 as the Chrysler Prowler when Plymouth was dropped in 2001.

Nov 06, 2015 | 1999 Plymouth Prowler

1 Answer

How to install rear bumper on a 1998 plymouth breeze xl


Just do it once by once ans start with a small one first

Aug 17, 2014 | Cars & Trucks

1 Answer

How to remove bumper


1. Remove rear combination light assembly. A. Remove two mounting screws. B. Disconnect electrical connector from rear side of light assembly.

2. Remove bumper assembly. A. Remove four fasteners and four retaining screws from top of bumper assembly. B. Remove mud flap from bumper assembly. C. Remove two screws from bottom of bumper assembly. D. Remove two screws from side of bumper assembly. E. Remove four bumper mounting bolts from under of vehicle.
3. Install rear bumper in reverse order of removal.

Dec 22, 2013 | 2004 Kia Sedona

2 Answers

Need step by step instructions on how to remove a rear bumper cover on a 2007 nissan altima


Rear Bumper: Service and Repair
REAR BUMPER
Removal and Installation
REMOVAL
1. Remove the LH and RH rear combination lamps.
2. Remove both the rear wheels and tires.
3. Remove the LH and RH splash shields.
4. Remove the rear bumper fascia clips and screws, then remove the rear bumper fascia.
5. Remove the rear energy absorbing foam.
6. Remove the rear bumper reinforcement.
7. Remove the rear bumper supports.
INSTALLATION
Installation is in the reverse order of removal.

c674cde.jpg

Nov 12, 2009 | 2007 Nissan Altima 3.5 Sedan

1 Answer

How to remove the rear bumper on a 2005 Kia Sedona


1. Remove rear combination light assembly. A. Remove two mounting screws. B. Disconnect electrical connector from rear side of light assembly. bs6d007a.gif 2. Remove bumper assembly. A. Remove four fasteners and four retaining screws from top of bumper assembly. bs6d007d.gif B. Remove mud flap from bumper assembly. C. Remove two screws from bottom of bumper assembly. bs6d007e.gif D. Remove two screws from side of bumper assembly. bs6d007b.gif E. Remove four bumper mounting bolts from under of vehicle. bs6d007c.gif 3. Install rear bumper in reverse order of removal.

Nov 09, 2009 | 2005 Kia Sedona

1 Answer

I am trying to find the wiring connector in the rear for hooking up lights for pulling a trailer. any ideas where it is located at on 98 plymouth grand voyager se?


Depends on what you have for an adapter. If it's sort of like a "T" shape with 4 pin connector coming out side, then you should be able to find spot to adapt it, somewhere between rear bumper & rear wheels, along frame area usually. If all you have is a flat 4 connector, with wires, then easiest way is to remove rear corner trim panel behind taillight on drivers side, and splice/wire it in there to harness.

Jul 03, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Dodge prowler


Cooling system problems are easy to fix as there really is only a few things that actually regulate the temp. Your thermostat is more than likely stuck half open. That would explain why its ok at night but not during the day.

Do your cooling fans come on? If they do and seem to be at least trying to do their job my solution would indeed be your best bet. Make sure your fans come on when the temp gets high, otherwise you may have a bad fan relay.

Aug 14, 2008 | 2001 Plymouth Prowler

1 Answer

99 Plymouth Voyager Rear Bumper


If you look up from under you should see some push clips. if your removing entire bumper with rebar & all, it's probably about 4 nuts holding it to bumper shocks, but be sure to look near ends at fenders for push clips , and or screws, and across mid section. watch it, it's pretty heavy with the rebar attached so make sure you have everything ready & remove nuts last, with some help to hold it up.

Aug 05, 2008 | 1999 Plymouth Grand Voyager

1 Answer

Price on a 1995 ertl 1/18 plymouth prowler concept vehicle


Need to find a price on a 1995 ertl 1/18 plymoutCheck eBay.com to see if there are others out there. Put them on your watch list and you should get a good idea of what they are going for.h prowler concept vehicle.

May 15, 2008 | 2001 Chrysler Prowler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

691 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...