Question about 1995 Mitsubishi Galant

2 Answers

I HAVE FUEL ,COMPRESSION BUT NO SPARK ,CAN IT BE THE CONTROL MOD. OR DISTR.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 4,525 Answers

Chec dist inside for corrosion--ignition module is on dist shaft-that may be failin--however condition of plug wires cud be bad -they rot inside

Posted on Sep 13, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 308 Answers

Could be they will test yours at autozone free of charge, also if the oil sending unit goes out it stops making spark, and again if the crank sensor is out. The oil sending unit is the cheaper of the two generally and easy to change just need a special socket they might let you use at autozone.

Posted on Sep 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put used engine in 08 chevy Equanox Junk yard gave me 05 it wont start help


Fuel, compression and spark.

Check the above. If you have adequate fuel pressure, reasonable compression and a good spark the engine should start. It may also be a good idea to check for compatibility with your engine control module between a 2008 model year and the 2005 model years.

Jul 23, 2017 | 2008 Chevrolet Equinox

1 Answer

Engen problem and missing


Sir, your question is not very clear, but I will still try to post a solution here. Engine missing could be due to any problem in fuel system, ignition system, engine or ECM as well.

LOW ENGINE IDLE SPEED (Poor idling):
-Throttle body (do the cleaning and idle speed learning)
-A /C signal circuit
-Fuel pump control circuit
-Fuel pump
-Intake system
-P C V valve (clogged or open) and hose

ROUGH IDLING:
-Cylinder Compression
-Ignition system (Igniters, spark plugs, wiring harness)
-Spark plug fouled, gap too wide or too short. (1.00-1.1 mm)
-Fuel injector circuit
-E C M power source circuit
-Fuel pump control circuit
-Fuel pump (required pressure 44 psi - 49 psi)
-Throttle body (cleaning)
-Intake system
-P C V valve and hose
-Air fuel ratio sensor
-Heated oxygen s ens or
-Mass air flow meter
-Idle hunting
-Throttle body
-Intake system
-P C V valve and hose
-Air fuel ratio sensor
-Mass air flow meter

HESITATION/ POOR ACCELERATION:
-Fuel pump control circuit
-Fuel pump
-Spark plug
-Ignition system
-Fuel injector circuit
-E C M power source circuit
-Mass air flow meter
-Throttle body (do cleaning)
-Intake system
-Valve timing
-Cylinder Compression


Jan 18, 2014 | 2008 Toyota Corolla

3 Answers

Went to work one morning and going home after work and car will not start getting fuel pressure and spark.


replace crankshaft positon sensor or cam shaft postion sensor they control in what order to fire the spark common issues when a crank postion sensor fails is non start situations


if it helps at all l please leave a good review

May 09, 2011 | 1999 Volkswagen Cabrio

1 Answer

98 windstar, 3.0 v6. shakes when in park, D,R etc. up to 30 moh ish. checked motor mounts, compression. balence bar turns, crank sensory mod., flex plate not cracked, master air flow sensor, cam sensor,...


SOUND LIKE WEAK FUEL PUMP.YOUR VECHICLE IS SURGING WHEN FUEL PUMP GOING BAD.REPLACE FUEL FILTER.CHECK FUEL PRESSURE SHOULD BE 35 - 45 PSI WITH KEY ON ENGINE OFF.IF FUEL SYSTEM OKAY. YOU COULD HAVE BAD SPARK PLUGS AND WIRES.

Dec 04, 2010 | 1998 Ford Windstar

2 Answers

1992 pickup won't start. tried new wires, distr cap and module. any suggestions


WELL OU GOTTA FIGURE OUT WHAT IT IS LACKING. FUEL, SPARK, OR NO AIR

Nov 08, 2009 | 1992 GMC Sierra K1500

2 Answers

Hi i have a 90 mod rx7 turns over it has spark its got new plugs it has new battery and is getting fuel but still wont start what can you sujest could be rong with my car


Take a spark plug out, reconnect it to the spark plug wire and check for spark at the plug. Repeat as many spark plugs as you can. If you're sure it's getting fuel, you'll need to do a compression check, or make sure the tiiming is still correct. By the way what test did you do to determine fuel delivery is alright.

Oct 22, 2009 | 1990 Mazda RX-7

1 Answer

S10 blazer lacks power, bogs under acceleration


Check your coil output, buy a cheep spark tester. Pull of a spark plug wire and plug in the tester(ground the other end), set it to bridge a gap for 30,000 volts.Have someone start it and make sure the spark will jump the gap on the tester.Danger-Very high voltage! It will light you up if your touching the tester while the car is running!You'll be able to see a bright blue spark(and hear it as well) if your coil is good.If it's a yellow thin spark it's probably the coil.
If you have good spark, check the fuel filter and fuel pressure at the fuel rail.
Back firing could be timing,cam position or crank position sensor.Worst case scenario, timing chain or belt.

Jul 10, 2009 | 2000 Chevrolet Blazer

1 Answer

1995 buick riviera sc won't start changed fuel pump ,


Have you checked for injection pulse or compression. Will it start if you spray carb cleaner in the intake?

May 05, 2009 | 1995 Buick Riviera

1 Answer

My 1993 Olds 88 wont start cranks but wont kick over. Fuel prob


3.8 are known for ignition trouble but first use the fuel release valve located on top of engine under a screw cap to see if your getting fuel. It takes 4 things to make engine run fuel spark air and compression. But most likely the Ign control module or crank sensor. So try this
1) check the fuel pressure
2) check for spark
3) compression test

Apr 26, 2009 | 1988 Oldsmobile Delta 88

Not finding what you are looking for?
1995 Mitsubishi Galant Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...