Question about 2004 Chevrolet Malibu
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the only thing i will recomend is to make sure the engine is complety cold before doing it, because more of this cars come with aluminum heads and if not cold before doing it might damage spark plug thread, i can't remebre very well the easiest way to replace them, but if it is a v-6 motor will be easier by removing the two top engine mounts on top of radiator and the gently lift transmission by rear side of car and this will give you more clearance on the rear plugs, and if plug wires are hard to remove tunr it rt to left and then puul them of, if they brake don;t try to fix them just replace it.
Posted on Jun 16, 2008
the hazzard switch is together with the turn signals, so if they are not working properly, check hazzard switch. the switch has a built in timer for hazzards and turn signals.
Posted on Oct 01, 2009
Allow the engine to cool before removing the spark plugs. Attempting to remove spark plugs from a hot engine can cause the spark plugs to seize. This can damage the cylinder head threads. Clean the spark plug recess area before removing the spark plug. Failure to do so can result in engine damage due to dirt or foreign material entering the cylinder head, or in contamination of the cylinder head threads. Contaminated threads may prevent proper seating of the new spark plug. Use only the spark plugs specified for use in the vehicle. Do not install spark plugs that are either hotter or colder than those specified for the vehicle. Installing spark plugs of another type can severely damage the engine.
WARNING Do not coat spark plug threads with anti-seize compound. If anti-seize compound is used and spark plugs are over-torqued, damage to the cylinder head threads may result.
Posted on Oct 07, 2009
Testimonial: "Thanks for the help, it was easy to change out the plugs with your info."
on 2.4 engines, remove the 4 bolts on the ignition coil cover, on top of engine.pull straight up to release boots from sparkplugs. all 4 cylinders are about the same..
Posted on Oct 30, 2009
Change headlights in 2004 Chevy Malibu Classic
Open the hood and pull up on the two black tabs on either side of the lamp assembly. Pull the lamp assembly forward gently and unclip the wiring harness. Twist the socket counter-clockwise and remove it. The bulb should be removed by wiggling it.
Install new bulb in its place and turn the socket back into place. Reconnect the wiring harness and return the lamp to its original position. Line up the holes in the lamp assembly to the round ends of the mounting pins, and press down on the two black tabs to hook the lamp assembly into place.
Posted on Nov 22, 2009
Tips for a great answer:
Apr 14, 2015 | 2004 Chevrolet Malibu
Oct 10, 2013 | 2005 Chevrolet Malibu
Aug 23, 2013 | 2004 Chevrolet Malibu
Jan 26, 2012 | 1997 Chevrolet S-10 Pickup
Aug 05, 2011 | 2004 Chevrolet Malibu
Jun 14, 2010 | 2004 Chevrolet Malibu
Mar 12, 2010 | 2004 Chevrolet Malibu
Jan 31, 2010 | 2004 Chevrolet Malibu
May 07, 2009 | 2004 Chevrolet Malibu
116 people viewed this question
Usually answered in minutes!