Question about 1998 Oldsmobile Bravada

1 Answer

Electrical / Lighting Systems

Check engine light is on, and the transmission will only go into second and third, and the key will not come out of the ignition. HELP. Vehicle has 46,000 miles on it, and all these things have happened in the last week.

Posted by on

  • d14_lopez Jan 02, 2009

    all gauges on my dash are dead with frequent jumps almost like voltage spikes. Tranny will hesitate to take off and will only go to 3rd gear at 60mph the rpm's were at 3000 rpm and also my key will not come out of the ignition.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 291 Answers

If the vehicle will not shift into park, the key will not come out. Problem in the linkage to the transmission first and then check for codes to indicate which system for the check engine light.

Posted on May 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 Pontiac grand am se1 acts like door is open and interior light stays on also does t lock on its own when in gear and lights don't blink and horn not honk when locking with key bob


Door ajar switch problem more then likely or wiring issue . The BCM - body control module won't turn off interior light , let door lock because it think's the door is open . The door ajar switch is a input to the BCM .

The first thing would be to have it checked for DTC'S - diagnostic trouble codes . Also check with an enhanced scan tool to see if the BCM shows ajar switch data (open or closed ? Do you know about body electronics ?
Body Control Module
The various BCM input and output circuits are described in the corresponding functional areas indicated on the BCM electrical schematics. The Body Control Module functions include the following:
?€¢
A/C compressor request. Refer to Air Temperature Description and Operation


?€¢
Remote Function Control. Refer to Keyless Entry System Description and Operation


?€¢
A/C cooling Fan. Refer to Air Delivery Description and Operation


?€¢
Audio Delay Power. Refer to Radio/Audio System Description and Operation


?€¢
Exterior and interior lighting control. Refer to Exterior Lighting Systems Description and Operation


-
Daytime running lights (DRL)


-
Automatic lighting control


-
Fog lamps


?€¢
Interior lighting. Refer to Interior Lighting Systems Description and Operation


?€¢
Battery rundown protection (Inadvertent Power). Refer to Interior Lighting Systems Description and Operation


?€¢
Chimes. Refer to Audible Warnings Description and Operation


-
Key-In-Ignition


-
Head Lamps On


-
Seat Belt Not Fastened


-
Turn Signal On


-
Park Brake Warning


-
Door Ajar Warning


-
Check gages


?€¢
Gage control. Refer to Instrument Cluster Description and Operation in Instrument Panel, Gages, and Console.


?€¢
Instrument cluster indicator control. Refer to Instrument Cluster Description and Operation in Instrument Panel, Gages, and Console.


?€¢
Theft deterrent. Refer to Theft Systems Description and Operation .


?€¢
Engine coolant level sensing. Refer to Cooling System Description and Operation .


?€¢
Washer solvent level sensing. Refer to Wiper/Washer System Description and Operation in Wipers/Washer Systems.


?€¢
Key-in-ignition sensing. Refer to Audible Warnings Description and Operation in Instrument Panel, Gages, and Console.


?€¢
Seat belt use sensing. Refer to Seat Belt System Description and Operation .


?€¢
Brake fluid level sensing.


?€¢
Parking brake state sensing.


?€¢
Rear compartment interface. Refer to Power Door Locks Description and Operation


?€¢
Horn interface.


?€¢
Door lock interface. Refer to Power Door Locks Description and Operation


?€¢
Bulb Check. Refer to Instrument Cluster Description and Operation in Instrument Panel, Gages, and Console.

Oct 24, 2016 | 2004 Pontiac Grand Am

1 Answer

About a mile down the road the check engine light will come on and car will jerk jump down to third gear and then will only work in second and third you can stop the car turn ignition off for about 30...


Is this an automatic? P1527, Basically, the tcm is telling the pcm to turn on the lite. You could have tranny problems? Could be issue with transmission range sensor? I saw a service bulletin, kt2007020701, that is a relearn procedure, if the pcm--tcm or transmission has been replaced. I don't know if relearn will help or not?

Nov 14, 2014 | 2004 Kia Optima

3 Answers

2001 Pontiac Montana transmission will not shift into overdrive


sound like Modulator elect fault.... worth doing this first lot cheaper than tranny rebuild

Nov 09, 2013 | 2001 Pontiac Montana

1 Answer

Electronic pressure control solenoid circuit p1745. Check engine light on 2000 ford escort, 4cl, automatic. Advance auto told me it was a dealer part but I can't find it on any of the ford websites?...


Here is what the service manual says about the EPC solenoid, the processor looks at allot of different inputs to command the solenoids, such as Throttle Position Sensor, Vehicle Speed Sensors, Transmission Range Sensor and RPM signal, The PCM controls the shift patterns for the transmission. Electronic Pressure Control (EPC) Solenoid
The electronic pressure control (EPC) solenoid is located on the main control valve body and is controlled by the PCM. The EPC controls line pressure used to apply and release clutches and bands in the transmission.
The 2-3 shift solenoid is located on the main control valve body and is switched on and off by electrical signals from the PCM. The 2-3 shift solenoid activates the 2-3 shift valve which controls the automatic shifting between second and third gear. Second gear is established when the 2-3 shift solenoid is switched on. The 2-3 shift solenoid is switched off when vehicle speed increases and requires a second to third gear upshift.
The 3-4 shift solenoid is located on the main control valve body and is switched on and off by electrical signals from the PCM. The 3-4 shift solenoid activates the 3-4 shift valve which controls the automatic shifting between third and fourth gear. Third gear is established when the 3-4 solenoid is switched off. The 3-4 shift solenoid is switched on when vehicle speed increases and requires a third to fourth gear upshift.

Mar 23, 2013 | Cars & Trucks

1 Answer

PT Cruiser automatic transmission problems


Hello, guys, you may read about this article. Why check engine light is on. It has a very detailed explanation why check engine light is on and how to solve the question.

Aug 31, 2012 | 2002 Chrysler PT Cruiser

2 Answers

Reset the check engine light


unplugged tha bettery few minutes;if the check light turn on again, you have any fault code there and needed scannign for know what code is. With this number code we can tell you other details.

Good luck.

May 11, 2010 | 2002 Chevrolet Blazer

2 Answers

How do i do an oil change on my toyota lucida estima


I believe you can find some guidelines in the following free download, good luck!:)

Contains:


Air Conditioner
Brakes, Wheels & Tyres
Cam belt
Central Locking Stuff & Alarms
Cooling System
Cylinder Head
Electrical System & I.C.E
Engine
Exterior Lighting
Fuel & Emissions System
Suspension & Steering
Transmission Systems

Also contains:

Estima Guide
Estima Owners Handbook

Download (~50MB): http://www.mediafire.com/?yx9wiypm6t2

Jul 25, 2009 | 1996 Toyota Previa

2 Answers

Because my service engine soon light comes on, does that means something is wrong with my transmission? if so what can be minor? also my car is not pickn up it's normal speed


The SERVICE light coming on, indicates a fault detected by the vehicles on board computer. The fault might be transmission related, or possibly engine/emission related. Push the OFF and WARM buttons TOGETHER on the climate control panel ( with the ignition key on ) Hold for 5 seconds and failure codes should appear . Relay your findings. Hope this helps

May 05, 2009 | 1998 Oldsmobile Aurora

1 Answer

Automatic transmission problem


May be the Throttle Position Sensor. Normally the check engine light will come on when this happens.

Sep 05, 2008 | 2000 Honda Accord

1 Answer

Toyota estima 1995 model e-tcr 10g-rrspk


I believe you can find some guidelines in the following free download, good luck!:)

Contains:


Air Conditioner
Brakes, Wheels & Tyres
Cam belt
Central Locking Stuff & Alarms
Cooling System
Cylinder Head
Electrical System & I.C.E
Engine
Exterior Lighting
Fuel & Emissions System
Suspension & Steering
Transmission Systems

Also contains:

Estima Guide
Estima Owners Handbook

Download (~50MB): http://www.mediafire.com/?yx9wiypm6t2

Jul 27, 2008 | 1995 Toyota Previa

Not finding what you are looking for?
1998 Oldsmobile Bravada Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...