Question about 2006 Chevrolet HHR

Open Question

How to change the front turn signal bulb on chevy hhr 2006?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bryant329
  • 125 Answers

SOURCE: 2006 chevy hhr transmission fluid and filter change

usually a pan under the trans. anywhere from 10 to 22 bolts. filter inside. some vehicles have an oil style filter on the externally, but i don't think that this is one.

Posted on Sep 24, 2008

Ad
justuscc
  • 360 Answers

SOURCE: 2006 HHR Chevy starting problem

possible low battery......... have it charged or jumpstarted

Posted on Oct 02, 2008

  • 4 Answers

SOURCE: Replacing front turn signal bulb on 2006 Cadillac SRX

WikiAnswers
http://wiki.answers.com/Q/How_to_change_the_Cadillac_SRX_Front_Tun_Signal_Bulb

Posted on Feb 17, 2009

  • 61 Answers

SOURCE: how do you replace a rear turn signal bulb on chev...

There is an access panel on the inside rear sides by the lift gate. They pop out giving you access to the bulbs. I recommend replacing both at the same time since they seem to "blow" within a few days of each other.

Posted on Jun 07, 2010

  • 61 Answers

SOURCE: How to change a front turn signal bulb in a 2006

The procedure for changing the front bulbs is described in the owners manual but it is not easy. It is the same for the headlights, turn signals, and fog lights. First, turn the wheels in (to the left for the right side) and then turn off the vehicle. You will then loosen the screws on the inside plastic wheel well until you can bend it out of the way. You can then reach inside, and the bulbs all come out with a 1/4 twist to the left. Make sure you remove the old gasket ring, and install the new bulb with only one gasket. Screw the wheel well back into position and you are done.

Posted on Jun 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there, I have a 2005 Chevy Malibu 3.5L engine with an error code B3948. Does anyone know how to resolve this? Thanks!


See if the signal flashes, buy a new bulb. Some Chevy no longer use a flasher relay, the signal comes from the body computer.

B3935Transponder Authentication Error
B3948Left Front Turn Signal Circuit
B3949Right Front Turn Signal Circuit
B3950Left Rear Turn Signal Circuit

List of Diagnostic Trouble Codes for 2008 2010 HHR Chevy HHR Network

Dec 01, 2016 | 2005 Chevrolet Malibu

1 Answer

Location of turn signal flasher 2006 HHR chevy where is it located


Unlike older vehicles, the flashers on the HHR are controlled by the BCM.

If your turn signals are blinking rapidly, check the bulb connections for signs of corrosion. Clean any corroded connectors & add some dielectric grease before replacing.

Feb 13, 2015 | 2006 Chevrolet HHR

1 Answer

Changing the rear turn signal bulb


Some bulbs are really tough to remove on this car. Specially the front side lights. You have to first remove the panel in front of the tires. Hope this helps.

Apr 04, 2014 | 2007 Chevrolet HHR Fall

1 Answer

How do you replace a rear turn signal bulb on chevy hhr


There is an access panel on the inside rear sides by the lift gate. They pop out giving you access to the bulbs. I recommend replacing both at the same time since they seem to "blow" within a few days of each other.

May 20, 2010 | 2006 Chevrolet HHR

1 Answer

Changing bulb for front right turn signal


The procedure for changing the front bulbs is described in the owners manual but it is not easy. It is the same for the headlights, turn signals, and fog lights. First, turn the wheels in (to the left for the right side) and then turn off the vehicle. You will then loosen the screws on the inside plastic wheel well until you can bend it out of the way. You can then reach inside, and the bulbs all come out with a 1/4 twist to the left. Make sure you remove the old gasket ring, and install the new bulb with only one gasket. Screw the wheel well back into position and you are done.

Apr 07, 2010 | 2006 Chevrolet HHR

1 Answer

How do I get to the bulb on a 2006 hhr to change it?


I assume you mean the front bulb(s)...

The procedure for changing the front bulbs is described in the owners manual but it is not easy. It is the same for the headlights, turn signals, and fog lights. First, turn the wheels in (to the left for the right side) and then turn off the vehicle. You will then loosen the screws on the inside plastic wheel well until you can bend it out of the way. You can then reach inside, and the bulbs all come out with a 1/4 twist to the left. Make sure you remove the old gasket ring, and install the new bulb with only one gasket. Screw the wheel well back into position and you are done.

Mar 25, 2010 | 2007 Chevrolet HHR Special Edition

1 Answer

How to change a front turn signal bulb in a 2006 HHR


The procedure for changing the front bulbs is described in the owners manual but it is not easy. It is the same for the headlights, turn signals, and fog lights. First, turn the wheels in (to the left for the right side) and then turn off the vehicle. You will then loosen the screws on the inside plastic wheel well until you can bend it out of the way. You can then reach inside, and the bulbs all come out with a 1/4 twist to the left. Make sure you remove the old gasket ring, and install the new bulb with only one gasket. Screw the wheel well back into position and you are done.

Nov 29, 2009 | 2006 Chevrolet HHR

1 Answer

I have an 06 hhr, the right front turn light works but not the left, both back work


It's very likely the left front turn signal bulb is simply burnt out. Often times you can find bulb replacement instructions in the owners manual.

Nov 10, 2009 | 2006 Chevrolet HHR

1 Answer

How do you replace the front turn signal lights for a chevy hhr


how do you change the front turn signal light on chevy hhr 2006

Oct 02, 2009 | 2006 Chevrolet HHR

1 Answer

How do i fix 2006 chevy hhr headlight


Access to change the headlamp bulbs is through the wheel well. The recommended method is to remove the front tire and then the plastic inner fender liner. Once removed, you'll have easy (more or less) access to the rear of the headlamp housing.

Jun 24, 2009 | 2008 Chevrolet Hhr

Not finding what you are looking for?
2006 Chevrolet HHR Logo

Related Topics:

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...